LUCCI ELLIDY 261525 Installation Instructions

Installation Instructions
To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and
use of this product. Please keep the instructions for future reference.
Warranty
•
This product is covered by a 3-year warranty valid for in-store replacement or refund only.
•
The warranty period starts from the date of purchase. Please retain the proof of purchase for any warranty enquiries
•
The warranty will be void if there is any damage due to improper usage or modification to the product.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
•
Select a suitable location for this product:
Ensure it is on a flat and stable surface.
-
This product is suitable for indoor use only.
-
This product is not waterproof. Keep away from wet, dusty, humid, direct sun light or hot areas.
-
If the portable luminaire is placed in an area prone to moisture, ensure that the area is well ventilated, and an
-
appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product
fault, and as such is not covered under warranty.
•
Lay out all the components on a smooth surface and make sure no components are missing.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the product has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Operation Directions
1. Fully charge the product before using for the first time.
2. To charge the product, insert the included USB-C cable into the charging port at the back of the product and plug
into a compatible adaptor (not included) with a 5V DC 1A output.
3. The light will be orange while the battery is charging.
The light will turn green after the battery is fully charged.
4. Short press the ON/OFF touch switch at the front of the product to turn it ON or OFF.
5. Long press the ON/OFF touch switch at the front of the product to dim and adjust brightness up or down.
1 | P a g e
ELLIDY LARGE LED TABLE LAMP
SKU# 261525, 261526.
Rated Input 5VDC, 1A
v 1 . 0 ( 0 4 / 2 0 2 5 )