AMX CAFE DUET STANDARD NETLINX API (SNAPI) DEVICES Instruction Manual page 32

Audio Mixer Functions (Cont.)
Name
getOutput(sl,input)
getSwitcherPreset()
saveSwitcherPreset(preset)
setSwitcherPreset(preset)
switchInputToOutput(AUDIO,input,output[])
switchInputToOutput(ALL,input,output[])
switchInputToOutput(sl,input,output[])
switchInputToOutput(VIDEO,input,output[])
processSwitcherPresetEvent(int)
processSwitchEvent(SwitchLevel,int,int)
cycleVolumeMute()
cycleVolumePreset()
getVolumePreset()
saveVolumePreset(preset)
setVolume(level)
setVolumeMuteOn(state)
28
Component Channel Level Command
ISwitcherComponent
ISwitcherComponent
ISwitcherComponent
ISwitcherComponent
ISwitcherComponent
ISwitcherComponent
ISwitcherComponent
ISwitcherComponent
ISwitcherComponentListener
ISwitcherComponentListener
IVolumeComponent 26
IVolumeComponent 138
IVolumeComponent
IVolumeComponent
IVolumeComponent
IVolumeComponent 199
Constant
?OUTPUT-
[<sl>,]<input>
?SWITCHPRESET
SWITCHPRESET-
SAVE-<preset>
SWITCHPRESET-
<preset>
AI<input>O<output,out-
put,Ö>
CI<input>O<out-
put,outputÖ>
CL<sl>I<input>O<out-
put,outputÖ>
VI<input>O<output,out-
put,Ö>
SWITCHPRESET-
<preset>
SWITCH-
L<sl>I<input>O<out-
put>
VOL_MUTE
VOL_PRESET
?VOLPRESET
VOLPRESETSAVE-
<preset>
1 VOL_LVL
VOL_MUTE_ON
Notes
Query for the outputs connected to an
input, respond with SWITCH-
L<sl>I<input>O<output>,<output>Ö where
<sl> is ALL, VIDEO, or AUDIO and <out-
put> is 0 if there is no connection. If <sl> is
not supplied, ALL will be assumed.
Query for switcher preset, responds with
SWITCHPRESET-<preset>
Save switcher preset where <preset> is 1-x
and x is the maximum supported preset
(see specific module documentation)
Recall switcher preset where <preset> is 1-
x and x is the maximum supported preset
(see specific module documentation)
Switch <input> to one or more <output>s
for switcher level Audio. Use <input> 0 for
disconnect.
Switch <input> to one or more <output>s
for switcher level All. Use <input> 0 for dis-
connect.
Switch <input> to one or more <output>s
where <sl> is ALL, VIDEO, or AUDIO.
Use <input> 0 for disconnect.
Switch <input> to one or more <output>s
for switcher level Video. Use <input> 0 for
disconnect.
Switcher preset changed, where <preset>
is 1-x and x is the maximum supported pre-
set (see specific module documentation)
Switch connections changed, where <sl>
is ALL, VIDEO, or AUDIO and <input> is 0
if there is no connection.
Momentary Function Channel: Cycle vol-
ume mute when channel is activated
Momentary Function Channel: Cycle cam-
era preset when channel is activated
Query for volume preset, responds with
VOLPRESET-<preset>
Save Volume Preset where <preset> is 1 to
x and x is the maximum supported preset
(see specific module documentation)
Set volume, range is 0-255
Discrete Function Channel: Volume mute is
on while channel is active
Standard NetLinx API (SNAPI) R 1.8.0