AMX CAFE DUET STANDARD NETLINX API (SNAPI) DEVICES Instruction Manual page 187

Pool Spa Functions (Cont.)
Name
setPoolSpaAuxOn(aux,state)
setPoolSpaTemperatureScale(ts)
setSpaBlowerOn(state)
setSpaHeatState(OFF)
setSpaHeatState(HEATER)
setSpaHeatState(SOLAR)
setSpaHeatState(SOLAR_PREFERRED)
setSpaJets(OFF)
setSpaJets(LOW)
setSpaJets(MEDIUM)
setSpaJets(HIGH)
setSpaLightOn(state)
setSpaPumpOn(state)
setSpaSetpoint(nTemperature)
processPoolHeatStateEvent(OFF)
processPoolHeatStateEvent(HEATER)
processPoolHeatStateEvent(SOLAR)
processPoolHeat-
StateEvent(SOLAR_PREFERRED)
processPoolHeatStatusEvent(HEATER)
Standard NetLinx API (SNAPI) R 1.8.0
Component Channel Level Command
IPoolSpaComponent
IPoolSpaComponent
IPoolSpaComponent 186
IPoolSpaComponent 178
IPoolSpaComponent 179
IPoolSpaComponent 180
IPoolSpaComponent 181
IPoolSpaComponent 182
IPoolSpaComponent 183
IPoolSpaComponent 184
IPoolSpaComponent 185
IPoolSpaComponent 173
IPoolSpaComponent 171
IPoolSpaComponent
IPoolSpaComponentListener 174
IPoolSpaComponentListener 175
IPoolSpaComponentListener 176
IPoolSpaComponentListener 177
IPoolSpaComponentListener 187
Constant
POOLAUX-<aux num-
ber>,<state>
POOLSCALE-<ts>
SPA_BLOWER_ON
SPA_HEAT_OFF
SPA_HEATER
SPA_SOLAR
SPA_SOLAR_PREF
SPA_JETS_OFF
SPA_JETS_LO
SPA_JETS_MED
SPA_JETS_HI
SPA_LIGHT_ON
SPA_PUMP_ON
40 SPA_HEAT_LVL
POOL_HEAT_OFF_FB
POOL_HEATER_FB
POOL_SOLAR_FB
POOL_SOLAR_PREF_FB
POOL_HEATING
Notes
Set Pool/Spa Aux state where <aux num-
ber> is the number of the aux relay 1 to x
where x is the maximum supported aux
relay and <state> is 1 (on) or 0 (off) (see
specific module documentation)
Set the Pool/Spa temperature scale, where
<ts> is FAHRENHEIT, CELSIUS
Discrete Function Channel: Spa blower is
on while channel is active
Momentary Function Channel: Set Spa
heat state to off
Momentary Function Channel: Set Spa
heat state to heater
Momentary Function Channel: Set Spa
heat state to solar
Momentary Function Channel: Set Spa
heat state to solar preferred
Momentary Function Channel: Set Spa jets
to off
Momentary Function Channel: Set Spa jets
to low
Momentary Function Channel: Set Spa jets
to medium
Momentary Function Channel: Set Spa jets
to high
Discrete Function Channel: Spa light is on
while channel is active
Discrete Function Channel: Spa pump is on
while channel is active
Set Spa setpoint, value is in degrees C or F
depending on temperature scale
Feedback Channel: Pool heater set to off
state, see state chart
Feedback Channel: Pool heater set to heat
state, see state chart
Feedback Channel: Pool heater set to solar
state, see state chart
Feedback Channel: Pool heater set to solar
preferred state, see state chart
Feedback Channel: Pool heater status is
heater, see state chart
183