AMX CAFE DUET STANDARD NETLINX API (SNAPI) DEVICES Instruction Manual page 286

Video Conferencer Functions (Cont.)
Name
setAutoFocusOn(state)
setAutoIrisOn(state)
setCameraPreset(preset)
setFocus(focus)
setFocusRamp(NEAR)
setFocusRamp(FAR)
setFocusSpeed(speed)
setIris(iris)
setIrisRamp(OPEN)
setIrisRamp(CLOSE)
setIrisSpeed(speed)
setPan(pan)
setPanRamp(LEFT)
setPanRamp(RIGHT)
setPanSpeed(speed)
setTilt(tilt)
setTiltRamp(UP)
setTiltRamp(DOWN)
setTiltSpeed(speed)
setZoom(zoom)
setZoomRamp(OUT)
setZoomRamp(IN)
setZoomSpeed(speed)
282
Component Channel Level Command
ICameraComponent 162
ICameraComponent 163
ICameraComponent
ICameraComponent
ICameraComponent 160
ICameraComponent 161
ICameraComponent
ICameraComponent
ICameraComponent 174
ICameraComponent 175
ICameraComponent
ICameraComponent
ICameraComponent 134
ICameraComponent 135
ICameraComponent
ICameraComponent
ICameraComponent 132
ICameraComponent 133
ICameraComponent
ICameraComponent
ICameraComponent 158
ICameraComponent 159
ICameraComponent
Constant
AUTO_FOCUS_ON
AUTO_IRIS_ON
CAMERAPRESET-
<preset>
16 FOCUS_LVL
FOCUS_NEAR
FOCUS_FAR
19 FOCUS_SPEED_LVL
17 IRIS_LVL
IRIS_OPEN
IRIS_CLOSE
20 IRIS_SPEED_LVL
27 PAN_LVL
PAN_LT
PAN_RT
29 PAN_SPEED_LVL
28 TILT_LVL
TILT_UP
TILT_DN
30 TILT_SPEED_LVL
15 ZOOM_LVL
ZOOM_OUT
ZOOM_IN
18 ZOOM_SPEED_LVL
Notes
Discrete Function Channel: Auto focus is
on while channel is active
Discrete Function Channel: Auto iris is on
while channel is active
Recall camera preset where <preset> is 1-
x and x is the maximum supported preset
(see specific module documentation)
Set focus position, range is 0-255 (0=near)
Ramping Channel: Focus is ramped near
while channel is active
Ramping Channel: Focus is ramped far
while channel is active
Set focus speed, range is 0-255 (0=slow)
Set iris position, range is 0-255 (0=closed)
Ramping Channel: Iris is ramped open
while channel is active
Ramping Channel: Iris is ramped closed
while channel is active
Set iris speed, range is 0-255 (0=slow)
Set pan position, range is 0-255 (0=left)
Ramping Channel: Pan is ramped left while
channel is active
Ramping Channel: Pan is ramped right
while channel is active
Set pan speed, range is 0-255 (0=slow)
Set tilt position, range is 0-255 (0=down)
Ramping Channel: Tilt is ramped up while
channel is active
Ramping Channel: Tilt is ramped down
while channel is active
Set tilt speed, range is 0-255 (0=slow)
Set zoom position, range is 0-255 (0=out/
Wide)
Ramping Channel: Zoom is ramped
out(wide) while channel is active
Ramping Channel: Zoom is ramped in
(tele) while channel is active
Set zoom speed, range is 0-255 (0=slow)
Standard NetLinx API (SNAPI) R 1.8.0