Advertisement
Quick Links
REAR SPLASH GUARDS
FOR RAM TRUCKS WITH FACTORY FENDER FLARES
PLEASE READ ENTIRELY BEFORE YOU START
To guarantee a quality installation, we recommend reading these instructions thoroughly
before beginning any work. These instructions assume a certain amount of mechanical
ability and are not written nor intended for someone not familiar with auto repair.
REQUIRED TOOLS
Automotive Lift or Jack
Common Hand Tools
Drill
1/8", 5/16", and 1/4" Drill Bits
AEV30460AA
Last Updated: 12/09/22
Advertisement
Related Manuals for AEV 10308307AA
Summary of Contents for AEV 10308307AA
- Page 1 REAR SPLASH GUARDS FOR RAM TRUCKS WITH FACTORY FENDER FLARES PLEASE READ ENTIRELY BEFORE YOU START To guarantee a quality installation, we recommend reading these instructions thoroughly before beginning any work. These instructions assume a certain amount of mechanical ability and are not written nor intended for someone not familiar with auto repair. REQUIRED TOOLS Automotive Lift or Jack Common Hand Tools...
- Page 3 A M E R I C A N E X P E D I T I O N V E H I C L E S II. REAR SPLASH GUARD PREPARATION Fit the plastic reflector backing into place on the Splash Guard. Mark the three holes and drill 1/8” holes through the Splash Guard (fig.
- Page 4 E X P E D I T I O N V E H I C L E S Drill five 1/4” holes and two 5/16” holes along the bolt pattern in the AEV Rear Splash Guard (fig. 3). 5/16” 1/4”...
- Page 5 A M E R I C A N E X P E D I T I O N V E H I C L E S Using the Splash Guard as a template, drill the two innermost holes to 5/16” and outer two holes to 1/4”...
Need help?
Do you have a question about the 10308307AA and is the answer not in the manual?
Questions and answers