Advertisement
Quick Links
Advertisement
Related Manuals for AEV 10308308AB
Summary of Contents for AEV 10308308AB
- Page 1 REAR SPLASH GUARDS FOR RAM TRUCKS W/ AEV FENDER FLARES AEV30122AC Last Updated: 07/30/21...
- Page 2 Grease Pencil or Scribe Eye Protection NOTE: Diesel Trucks require the installation of the AEV High Clearance Exhaust Kit PN: 41060309AA This product is covered under the AEV Parts Limited Warranty, a copy of which can be found at aev-conversions.com/warranty.
- Page 3 REar SPLASH GUARD INSTALLATION 1. Drill through the holes on each Splash Guard to clear excess material using an 8 mm drill bit. 2. Hold the Splash Guard in place obtaining the best fit to the fender flare ensuring the bottom edge is parallel to the ground.
- Page 4 8. Loosely install a 1/4” x 1.5” Hi-Lo thread bolt with washer into locations 4,5, and 6. NOTE: These bolts have a self-tapping thread specific for this application. DO NOT USE POWER TOOLS. 9. Hand tighten hardware at location 1, 4, 5, and 6. DO NOT USE POWER TOOLS. 10.
Need help?
Do you have a question about the 10308308AB and is the answer not in the manual?
Questions and answers