Enhanced Local Management Interface (Elmi); Frame Relay Enhancements; Frame Relay Mib Extensions - Cisco 7246VXR - uBR Router Software Configuration Manual

cops tcp window-size
communications equipment (DCE) interface or X.25 profile with a DCE station type to remove the CUG
selection facility from incoming call packets destined for the preferential CUG only or for all CUGs.
You can also remove the selection facility from a CUG with outgoing access (CUG/OA).

Enhanced Local Management Interface (ELMI)

When used in conjunction with traffic shaping, the router can respond to changes in the network
dynamically. The optional Enhanced Local Management Interface (ELMI) feature allows the router to
learn QoS parameters from the Cisco switch and use them for traffic shaping, configuration, or
management purposes.
ELMI also simplifies traffic shaping configuration on the router. Previously, users needed to configure
traffic shaping rate enforcement values, possibly for every VC. Enabling ELMI reduces the chance of
specifying inconsistent or incorrect values when configuring the router.
To enable ELMI, you must configure it on the main interface. For configuration information, refer to the
chapter titled
Service Solutions Configuration Guide, Release 12.2

Frame Relay Enhancements

Cisco IOS Releases—Cisco IOS Release 12.2(4)BC1 and the Cisco uBR7200 series support recent
frame relay enhancements, such as:
•
•
For additional information about configuring frame relay, refer to one of these two documents, on
Cisco.com, depending on your Cisco IOS release:
•
•

Frame Relay MIB Extensions

The Cisco Frame Relay MIB adds extensions to the standard Frame Relay MIB (RFC 1315). It provides
additional link-level and VC-level information and statistics that are mostly specific to Cisco Frame
Relay implementation. This MIB provides SNMP network management access to most of the
information covered by the show frame-relay commands, such as show frame-relay lmi, show
frame-relay pvc, show frame-relay map, and show frame-relay svc.
For additional information, refer to
Configuration Guide, Release 12.2
For a release-specific list of MIBs supported by the Cisco uBR7200 Series, refer to the Cisco uBR7200
Series Software Release Notes on Cisco.com:
For descriptions of supported MIBs and how to use MIBs, refer to the
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
1-132
Configuring Frame Relay and Frame Relay Traffic Shaping"
Frame Relay end-to-end keepalives
PPP configuration over Frame Relay
"Configuring Frame Relay"
Release 12.1
Configuring Frame Relay and Frame Relay Traffic Shaping"
Solutions Configuration Guide, Release 12.2
http://www.cisco.com/en/US/docs/ios/12_2/12_2b/12_2bc/release/notes/u7208bc1.html
Chapter 1
on Cisco.com.
in the Cisco IOS Wide-Area Networking Configuration Guide,
"Configuring Frame Relay"
on Cisco.com.
Overview of Cisco uBR7200 Series Software
in the Cisco IOS Quality of
in the Cisco IOS Quality of Service
in the Cisco IOS Wide-Area Networking
Cisco MIBs web page on Cisco.com.
OL-2239-05