Sample Output-Cisco Ubr7200 Series Router; Related Information - Cisco 7246VXR - uBR Router Software Configuration Manual

Appendix A Installing or Upgrading Cisco IOS Software
Specify the destination filename:
Step 6
Destination file name? ubr7200-k8p-mz
This is the name the new software image will have when it is loaded onto the router. The image can be
named anything, but common practice is to enter the UNIX image filename.
Step 7 Erase the Flash device before confirming:
a.
b.
Before reloading, verify the correct installation and commands.
Step 8
a.
b.
Use the show version command to verify that the router is running with the proper image.
Step 9
Sample Output—Cisco uBR7200 Series Router
Router# show flash
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1
hampton/nitro/c7200-j-mz
2
3
4
5
6
7
3104544 bytes available (17473760 bytes used)

Related Information

The following documents on Cisco.com contain additional information related to software installation
and upgrade:
•
•
OL-2239-03
Enter yes to erase the existing software image resident in the router's Flash memory before copying
the new one.
Enter no to keep the existing software image. Be sure that you have enough Flash memory to keep both.
Erase flash device before writing? [confirm] yes/no
The copying process requires several minutes; the time differs from network to network. During the
copying process, messages are displayed to indicate which files have been accessed.
The exclamation point "!" indicates that the copying process is taking place. Each exclamation point
indicates that ten packets have been transferred successfully. A checksum verification of the image
occurs after the image is written to Flash memory.
Verify that the image is properly installed and that the boot system commands point to the proper
file to load. Information about verifying the image and boot commands is available in
"Resolving Common Image Installation Problems."
To reload the image, type:
Router# reload
*Mar 1 00:30:49.972: %SYS-5-CONFIG_I: Configured from console by console
System configuration has been modified. Save? [yes/no]: no !-- lower case
Proceed with reload? [confirm] yes !-- lower case
.. unknown 317FBA1B
.. unknown 9237F3FF
.D unknown 71AB01F1 10C94E0
.D unknown 96DACD45 10C97E0
.. unknown 96DACD45 10C9AE0
.D unknown 96DACD45 10C9DE0
.. unknown 96DACD45 10CA0E0
How to Choose a Cisco IOS Software Release
Field Notice: Cisco IOS TFTP Client Cannot Transfer Files Larger than 16MB in Size
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
4A0694 24 4720148 Aug 29 1997 17:49:36
92C574 11 4767328 Oct 01 1997 18:42:53 c7200-js-mz
10 7982828 Oct 01 1997 18:48:14 rsp-jsv-mz
8 639 Oct 02 1997 12:09:17 the_time
3 639 Oct 02 1997 12:09:32 the_time
8 639 Oct 02 1997 12:37:01 the_time
8 639 Oct 02 1997 12:37:13 the_time
Installing or Upgrading Cisco IOS Software
Appendix B,
A-3