Supported Software Features for the Cisco uBR7200 Series
For additional information about this and other commands, refer to the following document on
Cisco.com:
•
show controllers cable
Cisco IOS Release 12.3(9a)BC removes the tech-support keyword from the show controllers cable
command. This change allows users with large numbers of online cable modems to collect the necessary
information without consuming the console session for a long period of time.
Additional and related improvements are also available for the show tech-support command.
To display information about the interface controllers for a cable interface on the Cisco CMTS router,
use the show controllers cable command in user EXEC or privileged EXEC mode.
Syntax Description
slot/port
slot/port
downstream
upstream
port
mem-stat
memory
proc-cpu
tech-support
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
1-42
Cisco IOS CMTS Cable Command Reference Guide
http://www.cisco.com/en/US/docs/ios/cable/command/reference/cbl_book.html
show controllers cable {slot/port | slot/subslot/port} [downstream | upstream [port] | [mem-stat]
[memory] [proc-cpu]] [tech-support]
Identifies the cable interface and downstream port on the
Cisco uBR7100 series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can
be 0 or 1, depending on the cable interface.
Identifies the cable interface on the Cisco uBR7246VXR router.
Th syntax for the Cisco uBR10012 router is slot/subslot/port, where
the following are the valid values:
slot = 5 to 8
•
subslot = 0 or 1
•
port = 0 to 4 (depending on the cable interface)
•
(Optional) Displays downstream interface status.
(Optional) Displays upstream interface status.
(Optional) Specifies the desired upstream port. Valid values start with
0 for the first upstream port on the cable interface line card.
(Optional) Displays the output from the show memory statistics
command to display a summary of memory statistics for a Broadband
Processing Engine (BPE) cable interface line card.
(Optional) Displays the output from the show memory command to
display a summary of memory statistics, including the memory as it is
allocated per process, for a Broadband Processing Engine (BPE) cable
interface line card.
(Optional) Displays the output from the show processes cpu command
to display the processor status for a Broadband Processing Engine
(BPE) cable interface line card.
(Optional) Displays information from a number of different show
commands for technical support purposes. The exact output depends
on the platform, configuration, and type of protocols being used
Chapter 1
Overview of Cisco uBR7200 Series Software
OL-2239-05