Audience; Topics Covered By Hardware Documents - Cisco 2851 - Integrated Services Router User Manual

Audience

These documents describe several router platforms that are similar in functionality, but differ in the
number of interfaces supported. Some information provided may not apply to your particular router
model.
To access warranty, service, and support information, see the
Terms" section on page
Audience
This documentation is designed for the person installing, configuring, and maintaining the router, who
should be familiar with electronic circuitry and wiring practices and has experience as an electronic or
electromechanical technician. It identifies certain procedures that should be performed only by trained
and qualified personnel.

Topics Covered by Hardware Documents

Table 1
Table 1
Topic
Overview of Cisco 2800 Series Routers
Preinstallation Requirements and
Planning for Cisco 2800 Series Routers
Port and Cable Information for
Cisco 2800 Series Routers
Chassis Installation Procedures for
Cisco 2800 Series Routers
Cable Connection Procedures for
Cisco 2800 Series Routers
Power Up and Initial Configuration
Procedures for Cisco 2800 Series Routers
Troubleshooting Cisco 2800 Series
Routers
Installing Network Modules in
Cisco 2800 Series Routers
Installing Interface Cards in Cisco 2800
Series Routers
Cisco 2800 Series Hardware Documents: Introduction and Warnings
2
10.
lists the topics covered by these hardware documents.
Hardware Documentation for Cisco 2800 Series Routers
"Cisco 90-Day Limited Hardware Warranty
Description
This document. Describes the features and warnings of
Cisco 2800 series routers.
Describes the features and specifications of Cisco 2800
series routers.
Describes safety recommendations, site requirements, and
required tools and equipment, and includes an installation
checklist.
Provides information about cables needed to install your
Cisco 2800 series router.
Describes how to install your Cisco 2800 series router on a
desktop, in a rack, or on a wall.
Describes how to connect your Cisco 2800 series router to
a power source and to networks and external devices.
Describes how to power up your Cisco 2800 series router
and perform an initial configuration to provide network
access.
Describes how to isolate problems, read LEDs, and
interpret error and recovery messages.
Contains links to the procedures for installing network
modules in external chassis slots.
Contains links to the procedures for installing the various
types of interface card in external chassis slots.
OL-5808-01