Cisco 2851 - Integrated Services Router User Manual page 195

Figure 54
.
1
2
Install the bezel onto the front of the chassis as follows:
Step 6
a.
b.
Step 7 If you are finished installing modules, install the cover on the router. See the
Cover" section on page
OL-5792-04
Connecting an ILP Cable in Cisco 2821 and Cisco 2851 Routers
3
3
ILP cable connector, motherboard
ILP cable connector, power supply
Engage the plastic tabs of the bezel into the slots in the chassis.
Slide the bezel until it is centered and tight against the chassis.
56.
3
1
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
Replacing the Power Supply
3
3
3
ILP cable guides
"Installing the Chassis
2
55