Cisco 2851 - Integrated Services Router User Manual page 134

Installing and Removing Slot Dividers
Installing Slot Dividers in HWIC Slots on Cisco 2801 Routers
Figure 1
Figure 1
1
2
Install slot dividers into HWIC slots on Cisco 2801 routers as follows:
Guide the slot divider between the two rails in the bottom of the HWIC slot. Push the slot divider in until
Step 1
it is fully seated. When the slot divider is fully seated, its outer end is flush with the front panel of the
router. See
Installing Interface Cards in Cisco 2800 Series Routers
2
shows a slot divider for HWIC slots on Cisco 2801 routers.
Slot Divider for HWIC Slots on Cisco 2801 Routers
Figure 2.
OL-5791-01