Reset - D-Link Express Ethernetwork DI-704P User Manual

Broadband router with print server

Hide thumbs Also See for Express Ethernetwork DI-704P:

Table of Contents

Resetting the DI-704P

to the Factory Default Settings

After you have tried other methods for troubleshooting your network, you

may choose to Reset the DI-704P to the factory default settings.

To hard-reset the D-Link DI-704P to the Factory Default Settings, please do

the following:

Turn off the DI-704P

Locate the Reset button on the back of the DI-704P

Use a paper clip to press the Reset button and

power on

Hold for about 5 seconds (don't hold too long) and

then release. (Or, release when M1 and M2 flash

at the same time.)

After you have completed the above steps, the DI-704P

will be reset to the factory default settings

Table of Contents