D-Link Express Ethernetwork DI-704P User Manual page 45

Broadband router with print server
Hide thumbs Also See for Express Ethernetwork DI-704P:
Table of Contents

Advertisement

Using the Configuration Menu (continued)
Advanced > Routing
Static routes can be added if you require specific routes within your internal network.
These routes will not apply to the WAN (Internet) network.
Destination:
Enter in the IP of the specified network that you want to access using the static route.
Subnet Mask:
Enter in the subnet mask to be used for the specified network.
Gateway:
Enter in the gateway IP address to the specified network.
Hop:
Enter in the amount of hops it will take to the specified network.
Enable:
Select this option for the specified static route to take effect.
Hop Count - in a transmission path, each link is terminated at a network device
such as a router or gateway. The number of hops equals the number of routers or
gateways that data must pass through before reaching the destination.
45

Advertisement

Table of Contents
loading

Table of Contents