Download Print this page

D-link DI-707P Quick Installation Manual

Ethernet broadband router and print server.
Hide thumbs

Advertisement

This product can be set up using
any current web browser, i.e.,
Internet Explorer or Netscape
Navigator.
Before You Begin
1. If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2. It's best to use the same computer that is connected to your modem for configuring
the DI-707P Broadband Router. The DI-707P acts as a DHCP server and will assign
all the necessary IP address information on your network. See Appendix at the
end of this Quick Installation Guide or the Manual on the CD-ROM for setting
each network adapter to automatically obtain an IP address.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DI-707P.11262002
DI-707P Ethernet Broadband Router
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight Through) Cable
5V DC Power Adapter
DI-707P
Ethernet Broadband
Router and Print Server
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.

Advertisement

   Related Manuals for D-link DI-707P

   Summary of Contents for D-link DI-707P

  • Page 1: Before You Begin

    5V DC Power Adapter If any of the above items are missing, please contact your reseller. ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-707P.11262002...

  • Page 2

    First, connect the power adapter to the receptor at the back panel of the DI-707P and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.

  • Page 3

    The DI-707P Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DI-707P M1 LED – will flash consistently to indicate M2 LED – a solid light indicates...

  • Page 4: Using The Setup Wizard

    When you have completed the steps in this Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear.

  • Page 5

    The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens Click Next Set up your new password. You have the option to establish a password. Click Next...

  • Page 6

    The Setup Wizard (continued) Select your Internet Connection. You will be prompted to select the type of Internet connection for your router. If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next Select Others only if you use PPTP in Europe or Big Pond Cable in Australia.

  • Page 7

    The Setup Wizard (continued) If your ISP requires a Static Address, and this option is selected, then this screen will appear: Enter the IP address informa- tion originally provided to you by your ISP. You will need to complete all the required fields.

  • Page 8

    Your Setup is Complete! Click Restart Test Internet Connection. You will be returned to the Home tab. Click to Exit Then relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection.

  • Page 9: Installing The Print Server Software

    APPENDIX Installing the Print Server Software Insert the installation CD-ROM into the CD- ROM drive. The following window will be shown automatically. If it is not, please run “autorun.exe” on the CD-ROM. Click Install Windows Printer Software Select your Windows operating system Wait until the following Welcome dialog appears.

  • Page 10

    DI-707P. For convenience, we call the printer connected to the printer port of the DI-707P a printer server. On a Windows 95/98 platform, open the Printers window in the My Computer menu.

  • Page 11

    To item. Be sure that the Printer Driver item is configured to the correct driver of your printer server. Click Port Settings Type in the IP address of the DI-707P. Click Configuring on Windows 2000/XP Platforms Click Port The configuration procedure for a...

  • Page 12

    Here’s how to configure the network adapter to obtain an IP address automatically for the DI-707P Broadband Router. Microsoft Windows XP: Go to Start > right click on My Network Places >...

  • Page 13

    Apple Macintosh OS X: Go to the Apple Menu Click on Network and Select System Preferences Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull- down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear...

  • Page 14: Technical Support

    Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.

This manual also for:

707p - di router

Comments to this Manuals

Symbols: 0
Latest comments: