D-Link Express Ethernetwork DI-704P User Manual page 43

Using the Configuration Menu (continued)
Advanced > SNMP
SNMP (Simple Network Management Protocol) is a widely used network monitoring and
control protocol that reports activity on each network device to the administrator of the
network. SNMP can be used to monitor traffic and statistics of the DI-704P. The DI-
704P supports SNMP v1.
Enabled or Disabled:
Click Enabled to enable SNMP click Disabled to deactivate SNMP.
Local:
SNMP services will be available on the Local (LAN) network.
Remote:
SNMP services will be available on the remote (WAN) network.
Get Community:
"Read only" access for network administration using SNMP. You can view the network,
but no configuration is possible wth this setting.
Set Community:
"Read and Write" access for network administration using SNMP. The administrator can
configure the network with this setting.
43