Sample Scenario - D-Link Express Ethernetwork DI-704P User Manual

Sample Scenario

4
A typical network setup at home (as shown above) might contain the following de-
vices. For specific information on setting up your network with the DI-704P please see
You will need broadband Internet access (a Cable or DSL subscription line into
your home or office)
Consult with your Cable or DSL provider for proper installation of the modem
Connect the Cable or DSL modem to the DI-704P wireless broadband router
(see the Quick Installation Guide included with the DI-704P.)
If you are connecting a desktop computer to your network, you can install the
D-Link DFE-530TX+ Ethernet adapter into an available PCI slot. (See the
Quick Installation Guide included with the DWL-530TX+.)
If you are connecting a laptop computer to your network, install the drivers for
the Ethernet Cardbus adapter (e.g., D-Link DFE-690TXD) into a laptop
computer.(See the Quick Installation Guide included with the DFE-690TXD.)
Connect your printer to the printer port on the DI-704P. Please refer to the
quick installation guide for loading the print server software.
** Easily upgrade to a wireless network by adding a wireless Access Point (D-Link DWL-900AP+) **
2
the Network Setup section on the following page.
1
3
5
6
10