Advertisement
Quick Links
Advertisement
Related Manuals for Spypoint FLEX G-36C
Summarization of Contents
Required Accessories
Memory Card Requirements
Specifies requirement for 2 to 512 GB class 10 ultra-high speed microSD card.
Battery Options: AA
Recommends 8 AA lithium non-rechargeable batteries for most models.
Battery Options: Rechargeable Pack
Mentions LIT-22 rechargeable lithium battery pack as an option.
Initial Setup and Activation
Charge the Internal Battery
Charge the camera's internal battery via the DC port until the status light turns off.
Create Spypoint Account
Create an account on spypoint.com/activate to proceed with setup.
Download and Sign In to App
Get the SPYPOINT mobile app from the App Store or Google Play and log in.
Add Camera to App
In the app's Cameras tab, press the '+' button to add your camera.
Install Hardware Components
Screw in the antenna and insert the memory card and batteries following orientation guides.
Power On Camera
Switch the camera to ON; all LEDs will begin to blink.
Format Memory Card
Hold the FORMAT button until the LED blinks green to format the memory card.
Test Photo Transmission
Press the TEST button to verify the camera can send a photo.
Prepare for Field Installation
Switch the camera to OFF until it is installed in the field.
Field Installation and Testing
Optimal Camera Placement (FLEX-S/DARK)
Install FLEX-S/DARK cameras where the solar panel gets 4+ hours of direct sunlight.
Final Field Check
Turn the camera ON and perform a final test before leaving it in position.
Need help?
Do you have a question about the FLEX G-36C and is the answer not in the manual?
Questions and answers