Related Manuals for mr. steam MS SUPER 3E
Summarization of Contents
Important Safety Instructions
General Safety Warnings
Key warnings and precautions for safe installation and operation.
Health and Usage Risks
Information on hyperthermia, pregnancy, and medication risks.
Manual Section Overview
Installer Section Topics
Key topics for installers: before installing, room guidelines, water quality, location.
Control and Homeowner Topics
Topics for control installation, homeowner operation, care, and warranty.
Selecting Your Mr.Steam Generator
Generator Sizing and Specifications
Guide to calculating room volume, selecting models, and specification details.
Installer Pre-Installation Procedures
Initial Inspection and Warnings
Checking for shipping damage and reviewing critical safety warnings.
Steam Room Construction Guidelines
Requirements for steam room enclosure and materials.
Steam Generator Installation Requirements
Water Quality and Generator Location
Guidelines for water quality, feedwater, and selecting a generator location.
Plumbing and Safety Considerations
Details on plumbing connections, safety valve, and operational warnings.
Typical Installation Procedures
Control Placement and Tandem Installation
Guidance on control location and installing multiple generators.
Plumbing Installation Details
Water Supply, Drain, and Steam Outlet
Connecting water supply, drain, steam outlet, and safety valve.
Optional Drip Pan and AromaSteam
Installation details for optional drip pan and AromaSteam.
Steamhead Installation
AromaSteam Steamhead Installation
Step-by-step guide for installing the AromaSteam steamhead.
Generator Component Diagram
Generator Dimensions and Connections
Diagram with dimensions and connection points for generators.
Electrical Installation
Wiring Requirements and Field Power
Adherence to electrical codes and field power wiring diagrams.
Wiring Diagrams
Single and Three Phase Diagrams
Wiring schematics for single-phase and three-phase models.
Multi-Generator Installation
MS Super 4E-6E and Tandem Cable
Installation of multiple generators and use of tandem cables.
System Startup and Troubleshooting
Initial Startup and Troubleshooting Steps
Procedures for initial startup and diagnosing common issues.
System Diagnostics and Indicators
Status Codes and LED Indicators
Understanding system status codes and control board LED indicators.
Optional AutoFlush System
AutoFlush Installation and Operation
Instructions for installing and operating the AutoFlush system.
Optional Equipment
Drip Pan and Express Steam
Details on installing optional drip pan and Express Steam feature.
Component Identification
Parts Diagrams for Generator Models
Visual identification of components for MS Regular and MS Super models.
Replacement Parts List
Parts by Number and Generator Model
List of replacement parts with part numbers and applicable generator models.
Control Installation Preparation
Pre-Installation Checks and Rough-In
Safety checks, compatibility, and rough-in procedures for controls.
Homeowner Safety Overview
General Safety and Health Precautions
Essential safety warnings, health risks, and usage precautions for homeowners.
Homeowner Operation and Maintenance
Setting Steam Bath and Maintenance
How to set temperature/duration and perform generator/control maintenance.
AromaSteam Usage and Warranty
AromaSteam Oils and Warranty Information
Instructions for using aromatic oils and warranty registration.
Manual Introduction and Safety
Read Me First! Safety Guidelines
Essential safety warnings and notes for users of the manual.
Key Manual Sections Overview
Overview of main manual sections for installation and operation.
Control Installation Preparation
Pre-Installation Checks and Warnings
Inspection, compatibility, and routing warnings for control installation.
Control Dimensional Information
iTempo/iTempoPlus Dimensions and Contents
Dimensions and box contents for iTempo/iTempoPlus controls.
iTempo/iTempoPlus Control Installation
Location, Cutout, and Cable Connection
Steps for locating, cutting, and connecting the control cable.
Control Installation Steps
Connecting Control and Preparing Mount
Connecting the control cable and preparing for adhesive mounting.
Control Mounting and Sealing
Applying Sealant and Final Mounting
Using silicone for sealing and pressing the control to the wall.
Remote Temperature Probe Installation
Probe Location and Generator Connection
Determining probe location and connecting it to the generator.
Remote Probe Connection Diagram
Generator Board Probe Connection
Diagram showing the probe cable connection to the generator's circuit board.
Final Remote Probe Installation
Cable Routing, Sealing, and Exposure
Routing cable, sealing wall, and ensuring proper probe bulb exposure.
iTempo Control Operation
Basic Functions: ON/OFF and PAUSE
Operating the iTempo control for ON/OFF and PAUSE functions.
iTempo Control Features
Timer, Memory, and Units Setting
Using timer, memory, and changing temperature units (F/C).
iTempoPlus Control Operation
Powering Up and Basic Controls
Initial setup, clock setting, and basic ON/OFF functions for iTempoPlus.
iTempoPlus Settings Configuration
Setting Clock and Steambath Duration
How to set the clock and adjust the steambath duration.
iTempoPlus Temperature and Presets
Setting Temperature and Memory
Adjusting temperature settings and using the memory feature.
Programming Presets (PROG 1 & PROG 2)
Storing and recalling preferred time and temperature settings.
iTempoPlus Additional Features
Temperature Units, AromaSteam, and ChromaSteam
Changing units, operating AromaSteam, and using ChromaSteam.
Control Care and Warranty
Cleaning Tips and Warranty Registration
Guidelines for cleaning controls and registering the product warranty.
Control Installation Template
Cutout Dimensions for Controls
Template providing the exact dimensions for control installation cutouts.
Optional AutoFlush System
AutoFlush Assembly and Operation
Assembly of the AutoFlush system and how it operates.
AutoFlush System Installation Details
Installation Instructions and Older Models
General installation steps and specific instructions for older generators.
Need help?
Do you have a question about the MS SUPER 3E and is the answer not in the manual?
Questions and answers