sYsteM reset
To recover from some fault conditions (refer to the Trouble-
shooting Section) you may need to perform a system reset.
To perform the system reset follow this procedure:
1. Press both the talk button (14) and the mute control (15)
button on the headset for 5 seconds.
. When the talk indicator light (17) on the headset blinks,
release both buttons.
. Press the talk button again.
4. Next reset the base unit by disconnecting the AC power
adapter (24) from the AC power adapter jack (7) for 5
seconds, then reconnect.
The system reset operation is complete.
MAintenAnCe
1. Unplug the unit from the telephone and the AC adapter
from the power source before cleaning.
. Clean the equipment with a damp (not wet) cloth.
. Do not use solvents or other cleaning agents.
4
OPtiOnAl ACCessOries
& rePlACeMent PArts
DeSCripTiOn
Telephone Handset Lifter
On-line Indicator
Battery
Battery Door
AC Adapter
24/46 Hookswitch Control Cord
Ring Detector
Short Cord
AWH54/AWH55+ Headset
D + M Filter Cord
5