Table of Contents
Related Manuals for nifty TM42T
Summarization of Contents
Introduction and General Information
FOREWORD
Introduction to the manual's purpose and importance.
SCOPE
Defines the manual's coverage of Niftylift 150T models.
INTRODUCING THE 150T TRAILER MOUNT (TM) SERIES
Describes the features and versatility of the 150T trailer mount.
GENERAL SPECIFICATION
Lists key technical specifications of the Niftylift 150T.
IDENTIFICATION (UK PLATE)
Details information found on the machine's identification plate.
EC DECLARATION OF CONFORMITY (Typical)
States the machine's compliance with EU directives.
Safety
MANDATORY PRECAUTIONS
Outlines critical safety rules and responsibilities for safe operation.
ENVIRONMENTAL LIMITATIONS
Specifies operating limits related to environment and wind speed.
NOISE AND VIBRATION
Details noise emission levels and vibration exposure for operators.
TEST REPORT
Summarizes the testing procedures and standards applied to Niftylift machines.
Preparation and Inspection
UNPACKING
Procedures for receiving and preparing the machine after transit.
PREPARATION FOR USE
Mandatory systematic inspection before putting the machine into service.
PRE-OPERATIONAL SAFETY CHECK SCHEDULES
Covers daily, weekly, monthly, and annual safety checks for the machine.
PLACARD, DECALS & INSTALLATION (UK)
Lists required placards, decals, and their installation details.
TORQUE REQUIREMENTS
Specifies correct torque values for bolts and nuts during maintenance.
Operation
CONTROL CIRCUIT COMPONENTS
Identifies and describes the key components of the control system.
SETTING UP PROCEDURES
Step-by-step guide for safely deploying outriggers and setting up the machine.
GROUND CONTROL OPERATION
Instructions for operating the Niftylift from the ground controls.
PLATFORM CONTROL OPERATION
Instructions for operating the Niftylift from the platform controls.
CAGE WEIGH SYSTEM
Details the electronic load cell and its function for overload protection.
BATTERIES AND CHARGING
Procedures and precautions for charging the machine's batteries.
TRANSPORTING, TOWING, CRANEAGE, STORAGE AND SETTING TO WORK
Guidelines for moving, storing, and preparing the machine.
TRACTION DRIVE POSITIONING SYSTEM
Description and operation of the system for self-propelling the trailer.
Emergency Controls
GENERAL
Importance of checking emergency controls daily before operation.
IN THE EVENT OF AN INCAPACITATED OPERATOR
Procedure for moving the machine if the operator is incapacitated.
IN THE EVENT OF MACHINE FAILURE
Steps to take to lower the platform in case of machine failure.
INCIDENT NOTIFICATION
Mandatory reporting of accidents or incidents to Niftylift.
Responsibilities
CHANGES IN OWNERSHIP
Seller's responsibility to notify Niftylift of ownership changes.
MANUAL OF RESPONSIBILITIES
Requirement to read and understand responsibilities for safe operation.
INSPECTION/SERVICE/PRE-HIRE CHECK LIST
Checklist for inspections, servicing, and pre-hire checks.
Appendix A
Safety Related Parts of the Control System (SRP/CS)
Overview of safety-related control system parts and their approval levels.
MONITORING OF STABILISERS – SETTING UP
Details the stabiliser monitoring system for setting up.
MONITORING OF STABILISERS – BOOMS
Describes the stabiliser monitoring related to boom position.
LOAD SENSING SYSTEM
Explains the load sensing system for overload detection.
PLATFORM LEVELLING
Details the system ensuring the platform remains level during operation.
INTERLOCKING OF CONTROL POSITIONS
Explains how control positions are interlocked for safety.
PREVENT MOVEMENTS OF LOAD HOLDING CYLINDERS IN CASE OF PIPE FAILURE
Safety measures for load holding cylinders during hose failure.
Need help?
Do you have a question about the TM42T and is the answer not in the manual?
Questions and answers