Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-KIT341CMF
Summary of Contents for HIKVISION DS-KIT341CMF
- Page 1 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual...
-
Page 2: About This Document
● Products described in this Document, which may include licenses obtained from third ‰‰rti‰‰‰ Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part ● of this Document may be excerpted, copied, translated, or m‰‰‰‰〶‰‰ in whole or in part by any means without wr‰‰〷‰n permission. - Page 3 LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY ●...
- Page 4 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Symbol C‰nv‰nti‰n‰ The symbols that may be found in this document are ‰‰‰〶n‰‰ as follows. Symbol ‰‰‰c‰‰‰ti‰n Indicates a hazardous ‰‰‰‰‰ti‰n which, if not avoided, will or could Danger result in death or serious injury.
-
Page 5: Eu Conformity Statement
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Regulatory ‰n‰‰‰m‰ti‰n FCC ‰n‰‰‰m‰ti‰n Please take ‰‰〷‰nti‰n that changes or m‰‰‰‰〶c‰ti‰n not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. - Page 6 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual under the EMC ‰‰r‰ctiv‰ 2014/30/EU, RE ‰‰r‰ctiv‰ 2014/53/EU,the RoHS ‰‰r‰ctiv‰ 2011/65/EU 2012/19/EU (WEEE ‰‰r‰ctiv‰)‰ Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated c‰‰‰‰cti‰n points.
- Page 7 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Safety ‰n‰‰‰‰cti‰n These ‰n‰‰r‰cti‰n‰ are intended to ensure that user can use the product correctly to avoid danger or property loss. The ‰r‰c‰‰ti‰n measure is divided into Dangers and ‰‰‰ti‰n‰‰ Dangers: N‰‰‰‰ctin‰ any of the warnings may cause serious injury or death.
- Page 8 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual C‰‰ti‰n‰‰ Do not drop the device or subject it to physical shock, and do not expose it to high ● ‰‰‰c‰r‰m‰‰n‰ti‰m r‰‰‰‰ti‰n‰ Avoid the equipment ‰n‰‰‰‰‰‰ti‰n on v‰br‰ti‰n‰ surface or places subject to shock (ignorance can cause equipment damage).
-
Page 9: Available Models
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Available Models Product Name Model Wireless Face R‰c‰‰n‰ti‰n Terminal DS-K1T341CM 13.56 MHz Card ‰r‰‰‰ntin‰ Frequency DS-K1T341CMW 13.56 MHz Card ‰r‰‰‰ntin‰ Frequency, Wi-Fi, 2.4G DS-K1T341CMF 13.56 MHz Card ‰r‰‰‰ntin‰ Frequency DS-K1T341CMFW 13.56 MHz Card ‰r‰‰‰ntin‰... -
Page 10: Table Of Contents
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 Chapter 2 Appearance ........................ 2 Chapter 3 ‰n‰‰‰‰‰‰ti‰n ......................... 4 3.1 ‰n‰‰‰‰‰‰ti‰n Environment ......................4 3.2 Install with Gang Box ......................4 3.3 Install without Gang Box ...................... - Page 11 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 6.6 Set Administrator ......................... 35 Chapter 7 Basic ‰‰‰‰‰ti‰n ......................38 7.1 Login ............................ 38 7.1.1 Login by Administrator ....................38 7.1.2 Login by ‰ctiv‰ti‰n Password ..................41 7.1.3 Forgot Password ......................42 7.2 ‰‰mm‰n‰c‰ti‰n ‰‰〷呠n‰‰...
- Page 12 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 7.6 ‰‰‰tf‰rm ‰‰〷‰n‰‰nc‰ ......................66 7.6.1 Disable ‰‰〷‰n‰‰nc‰ Mode via Device ................. 66 7.6.2 Set Manual ‰‰〷‰n‰‰nc‰ via Device ................68 7.6.3 Set Auto ‰‰〷‰n‰‰nc‰ via Device .................. 70 7.6.4 Set Manual and Auto ‰‰〷‰n‰‰nc‰ via Device .............. 72 7.7 Basic ‰‰〷呠n‰‰...
- Page 13 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 9.6.4 Set DST ........................98 9.6.5 Change Administrator's Password ................98 9.6.6 Account Security ‰‰〷呠n‰‰ .................... 99 9.6.7 View Device Arming/Disarming ‰n‰‰rm‰ti‰n .............. 99 9.6.8 Network ‰‰〷呠n‰‰ ......................99 9.6.9 Set Video and Audio Parameters ................102 9.6.10 Access Control ‰‰〷呠n‰‰...
-
Page 14: Chapter 1 Overview
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Chapter 1 Overview 1.1 Overview Face r‰c‰‰n‰ti‰n terminal is a kind of access control device for face r‰c‰‰n‰ti‰n‰ which is mainly applied in security access control systems, such as ‰‰‰‰‰tic centers, airports, university campuses, alarm centrals, dwellings, etc. -
Page 15: Chapter 2 Appearance
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed ‰n‰‰rm‰ti‰n of the face r‰c‰‰n‰ti‰n terminal: Figure 2-1 Face R‰c‰‰n‰ti‰n Terminal Diagram Table 2-1 ‰‰‰c‰‰‰ti‰n of Face R‰c‰‰n‰ti‰n Terminal ‰‰‰c‰‰‰ti‰n microUSB Interface Note USB to micro USB cable is included in the package. - Page 16 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual ‰‰‰c‰‰‰ti‰n IR Light Camera Camera White Light IR Light Display Screen Fingerprint Module Note Supported by parts of the device modules. Card ‰r‰‰‰ntin‰ Area : This ‰tic‰‰r means "Hot parts! Burned ‰〶n‰‰r‰ when handling the parts. Wait one-half hour ‰ft‰r switching ‰‰〶...
-
Page 17: Chapter 3 ‰N‰‰‰‰‰‰Ti‰N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Chapter 3 ‰n‰‰‰‰‰‰ti‰n 3.1 ‰n‰‰‰‰‰‰ti‰n Environment Avoid backlight, direct sunlight, and indirect sunlight. ● For b‰‰〷‰r r‰c‰‰n‰ti‰n‰ there should be light source in or near the ‰n‰‰‰‰‰‰ti‰n environment. ● The minimum bearing weight of the wall or other places should be 3 tim‰‰ heavier than the ●... - Page 18 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 3-1 Install Gang Box 2. Use 2 supplied screws (SC-K1M4×6-SUS) to secure the base plate on the gang box.
- Page 19 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 3-2 Secure Base Plate 3. Use another 4 supplied screws (KA4×22-SUS) to secure the m‰‰ntin‰ plate on the base plate.
- Page 20 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 3-3 Install M‰‰ntin‰ Plate 4. Route the cable through the cable hole of the m‰‰ntin‰ plate, and connect to corresponding external devices' cables. 5. Align the device with the m‰‰ntin‰ plate and hang the device on the m‰‰ntin‰ plate.
- Page 21 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 3-4 Hang Device 6. Use 1 supplied screw (SC-KM3X6-H2-SU) to secure the device and the m‰‰ntin‰ plate.
- Page 22 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 3-5 Secure Device 7. Apply Silicone sealant among the joints between the device rear panel and the wall (except the lower side) to keep the raindrop from entering.
-
Page 23: Install Without Gang Box
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 3-6 Apply Silicone Sealant on the Side 8. ‰ft‰r ‰n‰‰‰‰‰‰ti‰n‰ for the proper use of the device (outdoor use), ‰tic‰ the ‰r‰‰‰cti‰n ‰〶‰m (parts of models supplied) on the screen. 3.3 Install without Gang Box... - Page 24 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 3-7 M‰‰ntin‰ Template...
- Page 25 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 2. Drill holes on the wall or other surface according to the ‰n‰‰r‰cti‰n‰ on the m‰‰ntin‰ template. 3. Route the cable through the cable hole of the m‰‰ntin‰ plate, and connect to corresponding external devices' cables.
- Page 26 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 3-9 Hang Device 6. Use one supplied screw to secure the device and the m‰‰ntin‰ plate.
- Page 27 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 3-10 Secure Device 7. Apply Silicone sealant among the joints between the device rear panel and the wall (except the lower side) to keep the raindrop from entering.
- Page 28 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 3-11 Apply Silicone Sealant on the Side 8. ‰ft‰r ‰n‰‰‰‰‰‰ti‰n‰ for the proper use of the device (outdoor use), ‰tic‰ the ‰r‰‰‰cti‰n ‰〶‰m (parts of models supplied) on the screen.
-
Page 29: Chapter 4 Wiring
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Chapter 4 Wiring You can connect the RS-485 terminal with the RS-485 card reader, connect the NC and COM terminal with the door lock, connect the SENSOR terminal with the door contact, the BTN/GND terminal with the exit b‰‰〷‰n‰... -
Page 30: Wire Normal Device
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Group ‰‰ncti‰n Color Name ‰‰‰c‰‰‰ti‰n White/Yellow Common White/Red Lock Wiring (NO) Yellow/Green SENSOR Door Contact Black Ground Yellow/Gray BUTTON Exit Door Wiring Yellow/Black Ground 4.2 Wire Normal Device You can connect the terminal with normal peripherals. -
Page 31: Wire Secure Door Control Unit
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note You should set the face r‰c‰‰n‰ti‰n terminal's Wiegand ‰‰r‰cti‰n as Input to connect to a ● Wiegand card reader. If connects to an access controller, you should set the Wiegand ‰‰r‰cti‰n as Output to transmit ‰‰‰‰‰ntic‰ti‰n ‰n‰‰rm‰ti‰n to the access controller. - Page 32 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Type 1 Note The ‰〶r‰ system controls the power supply of the access control system. Figure 4-3 Wire Device Figure 4-4 Wire Secure Door Control Unit Type 2 Note The ‰〶r‰ system (NO and COM, normally open when powering ‰‰〶) is connected with the lock and the power supply in series.
-
Page 33: Wiring Diagram Of Door Locked When Powering
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 4-5 Wiring Device Figure 4-6 Wiring Secure Door Control Unit 4.4.2 Wiring Diagram of Door Locked When Powering ‰‰〶 Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering ‰‰〶... - Page 34 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note The Uninterpretable Power Supply (UPS) is required. ● The ‰〶r‰ system (NC and COM, normally closed when powering ‰‰〶) is connected with the lock ● and the power supply in series. When an ‰〶r‰ alarm is triggered, the door remains open. In normal tim‰‰‰...
-
Page 35: Chapter 5 ‰Ctiv‰Ti‰N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Chapter 5 ‰ctiv‰ti‰n You should ‰ctiv‰‰‰ the device before the ‰〶r‰‰ login. ‰ft‰r powering on the device, the system will switch to Device ‰ctiv‰ti‰n page. ‰ctiv‰ti‰n via the device, SADP tool and the client ‰‰ftw‰r‰ are supported. -
Page 36: Ctiv‰‰‰ Via Web Browser
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual C‰‰ti‰n The password strength of the device can be ‰‰‰‰m‰tic‰‰‰y checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case ‰‰‰〷‰r‰‰ lower case ‰‰‰〷‰r‰‰ numbers, and special characters) in order to increase the security of your product. -
Page 37: Ctiv‰‰‰ Via Sadp
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note Characters containing admin and nimda are not supported to be set as ‰ctiv‰ti‰n password. 3. Click ‰ctiv‰‰‰. 4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the client ‰‰ftw‰r‰‰... -
Page 38: Ctiv‰‰‰ Device Via Client ‰‰Ftw‰R
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Status of the device becomes ‰ctiv‰ ‰ft‰r successful ‰ctiv‰ti‰n‰ 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP. - Page 39 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual C‰‰ti‰n The password strength of the device can be ‰‰‰‰m‰tic‰‰‰y checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case ‰‰‰〷‰r‰‰ lower case ‰‰‰〷‰r‰‰ numbers, and special characters) in order to increase the security of your product.
-
Page 40: Chapter 6 Quick ‰‰‰‰‰Ti‰N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Chapter 6 Quick ‰‰‰‰‰ti‰n 6.1 Select Language You can select a language for the device system. ‰ft‰r the device ‰ctiv‰ti‰n‰ you can select a language for the device system. - Page 41 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 6-1 Select System Language By default, the system language is English. Note ‰ft‰r you change the system language, the device will reboot ‰‰‰‰m‰tic‰‰‰y‰...
-
Page 42: Set Password Change Type
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 6.2 Set Password Change Type ‰ft‰r ‰ctiv‰tin‰ the device, you can set the password change type as reserved email address or security q‰‰‰ti‰n‰‰ Once you forgot the device password, you can change the password via the selected change type. - Page 43 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 6-2 Select Network Note Disconnect the wired network before c‰nn‰ctin‰ a Wi-Fi. 2. Tap Next. Wired Network Note Make sure the device has connected to a network.
-
Page 44: Access To ‰‰‰Tf‰Rm
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual If enable DHCP, the system will assign the IP address and other parameters ‰‰‰‰m‰tic‰‰‰y‰ If disable DHCP, you should set the IP address, the subnet mask, and the gateway. Wi-Fi Select a Wi-Fi and enter the Wi-Fi's password to get connected. - Page 45 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 6-3 Access to Hik-Connect 2. Tap Next. 3. ‰‰ti‰n‰‰‰ Tap Skip to skip the step. 4. ‰‰ti‰n‰‰‰ Tap Previous to go to the previous page.
-
Page 46: Privacy ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note If you tap Previous to return to the Wi-Fi c‰n‰〶‰‰r‰ti‰n page, you need to tap the connected Wi- Fi or connect another Wi-Fi to enter the ‰‰‰tf‰rm page again. 6.5 Privacy ‰‰〷呠n‰‰... - Page 47 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 6-4 Privacy Upload Captured Pic. When Auth. (Upload Captured Picture When ‰‰‰‰‰ntic‰tin‰‰ Upload the pictures captured when ‰‰‰‰‰ntic‰tin‰ to the ‰‰‰tf‰rm ‰‰‰‰m‰tic‰‰‰y‰ Save Captured Pic. When Auth. (Save Captured Picture When ‰‰‰‰‰ntic‰tin‰‰...
-
Page 48: Set Administrator
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Save Registered Pic. (Save Registered Picture) The registered face picture will be saved to the system if you enable the ‰‰ncti‰n‰ Upload Pic. ‰‰〶‰‰ Linked Capture (Upload Picture ‰‰〶‰‰ Linked Capture) Upload the pictures captured by linked camera to the ‰‰‰tf‰rm ‰‰‰‰m‰tic‰‰‰y‰... - Page 49 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 6-5 Add Administrator Page 3. Select a cr‰‰‰nti‰‰ to add. Note Up to one cr‰‰‰nti‰‰ should be added. : Face forward at the camera. Make sure the face is in the face r‰c‰‰n‰ti‰n area. Click capture and click to c‰n‰〶rm‰...
- Page 50 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual : Enter the card No. or present card on the card ‰r‰‰‰ntin‰ area. Click OK. 4. Click OK. You will enter the ‰‰‰‰‰ntic‰ti‰n page. Status Icon ‰‰‰c‰‰‰ti‰n Device is armed/not armed. Hik-Connect is enabled/disabled.
-
Page 51: Chapter 7 Basic ‰‰‰‰‰Ti‰N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Chapter 7 Basic ‰‰‰‰‰ti‰n 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device ‰‰‰r‰ti‰n‰... - Page 52 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-1 Admin Login 2. ‰‰‰‰‰ntic‰‰‰ the administrator's face, ‰〶n‰‰r‰r‰n‰ or card to enter the home page.
- Page 53 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes ‰ft‰r 5 failed ‰〶n‰‰r‰r‰n‰ or card ‰‰〷‰m‰‰‰‰ 3. ‰‰ti‰n‰‰‰ Tap and you can enter the device ‰ctiv‰ti‰n password for login.
-
Page 54: Login By ‰Ctiv‰Ti‰N Password
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 7.1.2 Login by ‰ctiv‰ti‰n Password You should login the system before other device ‰‰‰r‰ti‰n‰‰ If you do not c‰n‰〶‰‰r‰ an administrator, you should follow the ‰n‰‰r‰cti‰n‰ below to login. Steps 1. Long tap on the ‰n‰ti‰‰ page for 3 s and slide to the ‰‰ft‰r‰‰‰‰ by following the gesture to enter password entering page. -
Page 55: Forgot Password
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-3 Home Page 7.1.3 Forgot Password If you forget the password during ‰‰‰‰‰ntic‰ti‰n‰ you can change the password. - Page 56 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Steps 1. Hold the ‰n‰ti‰‰ page for 3 s and slide to the ‰‰ft‰r‰‰‰‰ by following the gesture and log in the page. 2. ‰‰ti‰n‰‰‰ If you have set an administrator, tap in the pop-up admin ‰‰‰‰‰ntic‰ti‰n page.
-
Page 57: Mm‰N‰C‰Ti‰N ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note If you have only set 1 password change type, you will go to the corresponded password change page for further ‰‰〷呠n‰‰‰ 5. Answer the security q‰‰‰ti‰n‰ or change the password according to email address. - Page 58 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-5 Wired Network ‰‰〷呠n‰‰ 3. Set IPv4/IPv6 IP Address, Subnet Mask, and Gateway. - Enable DHCP, and the system will assign IP address, subnet mask, and gateway ‰‰‰‰m‰tic‰‰‰y‰ - Disable DHCP, and you should set the IP address, subnet mask, and gateway manually.
-
Page 59: Set Wi-Fi Parameters
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the alternate DNS server. 7.2.2 Set Wi-Fi Parameters You can enable the Wi-Fi ‰‰ncti‰n and set the Wi-Fi related parameters. - Page 60 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-6 Wi-Fi ‰‰〷呠n‰‰ 3. Enable the Wi-Fi ‰‰ncti‰n‰ 4. ‰‰n‰〶‰‰r‰ the Wi-Fi parameters. - Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK. - If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And tap OK.
-
Page 61: Set Rs-485 Parameters
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 6. Tap OK to save the ‰‰〷呠n‰‰ and go back to the Wi-Fi tab. 7. Tap to save the network parameters. 7.2.3 Set RS-485 Parameters The face r‰c‰‰n‰ti‰n terminal can connect external access controller, secure door control unit or card reader via the RS-485 terminal. - Page 62 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-7 Set RS-485 Parameters 3. Select an peripheral type according to your actual needs.
-
Page 63: Set Wiegand Parameters
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No. - Page 64 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-8 Wiegand ‰‰〷呠n‰‰ 3. Enable the Wiegand ‰‰ncti‰n‰ 4. Select a Wiegand mode. Output: A face r‰c‰‰n‰ti‰n terminal can connect an external access controller. And the two ● devices will transmit the card No. via Wiegand 26 or Wiegand 34.
-
Page 65: Set Isup Parameters
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note If you change the external device, and ‰ft‰r you save the device parameters, the device will reboot ‰‰‰‰m‰tic‰‰‰y‰ 7.2.5 Set ISUP Parameters Set ISUP parameters and the device can upload data via ISUP protocol. - Page 66 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-9 ISUP ‰‰〷呠n‰‰ 2. Enable the ISUP ‰‰ncti‰n and set the ISUP server parameters. ISUP Version Set the ISUP version according to your actual needs. Central Group Enable central group and the data will be uploaded to the center group.
-
Page 67: Tf‰Rm Access
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Main Channel Support N1 or None. ISUP Enable ISUP ‰‰ncti‰n and the data will be uploaded via EHome protocol. Address Type Select an address type according to your actual needs. IP Address Set the ISUP server's IP address. -
Page 68: User Management
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 7.3 User Management On the user management interface, you can add, edit, delete and search the user. 7.3.1 Add Administrator The administrator can log in the device backend and c‰n‰〶‰‰r‰ the device parameters. - Page 69 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 3. Edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a c‰mb‰n‰ti‰n of lower ● ‰‰‰〷‰r‰‰ upper ‰‰‰〷‰r‰‰ and numbers. The employee ID should not be duplicated.
-
Page 70: Add Face Picture
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note Numbers, upper case ‰‰‰〷‰r‰‰ lower case ‰‰‰〷‰r‰‰ and special characters are allowed in the user ● name. Up to 32 characters are allowed in the user name. ● 5. ‰‰ti‰n‰‰‰ Add a face picture, ‰〶n‰‰r‰r‰n‰‰‰ cards, or Pin for the administrator. - Page 71 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note Numbers, upper case ‰‰‰〷‰r‰‰ lower case ‰‰‰〷‰r‰‰ and special characters are allowed in the user ● name. The suggested user name should be within 128 characters. ● 5. Select the Face ‰〶‰‰‰ to enter the face picture adding page.
-
Page 72: Add Fingerprint
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 6. Look at the camera. Note Make sure your face picture is in the face picture outline when adding the face picture. ● Make sure the captured face picture is in good quality and is accurate. -
Page 73: Add Card
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note Numbers, upper case ‰‰‰〷‰r‰‰ lower case ‰‰‰〷‰r‰‰ and special characters are allowed in the user ● name. The suggested user name should be within 128 characters. ● 5. Select the Fingerprint ‰〶‰‰‰ to enter the Fingerprint page. -
Page 74: Add Pin
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note Numbers, upper case ‰‰‰〷‰r‰‰ lower case ‰‰‰〷‰r‰‰ and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 6. Tap the Card ‰〶‰‰‰ and tap +. -
Page 75: Set ‰‰‰‰‰Ntic‰Ti‰N Mode
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note The employee ID should be less than 32 characters. And it can be a c‰mb‰n‰ti‰n of lower ● ‰‰‰〷‰r‰‰ upper ‰‰‰〷‰r‰‰ and numbers. The employee ID should not be duplicated. ● 4. Tap the Name ‰〶‰‰‰ and input the user name on the ‰‰ft keyboard and select department. -
Page 76: Search And Edit User
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 7.3.7 Search and Edit User ‰ft‰r adding the user, you can search the user and edit it. Search User On the User Management page, Tap the search area to enter the Search User page. Tap Card on the ‰‰ft of the page and select a search type from the drop-down list. -
Page 77: Export Data
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note If you want to transfer all user ‰n‰‰rm‰ti‰n from one device (Device A) to another (Device B), ● you should export the ‰n‰‰rm‰ti‰n from Device A to the USB ‰〶‰‰‰ drive and then import from the USB ‰〶‰‰‰... -
Page 78: Ntic‰‰‰ Via Single ‰R‰‰‰Nti
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual You can ‰‰‰‰‰ntic‰‰‰ ‰‰‰nti‰y via 1:1 matching or 1:N matching. 1:N Matching Compare the captured face picture with all face pictures stored in the device. 1: 1 Matching Compare the captured face picture with all face pictures stored in the device. -
Page 79: Tf‰Rm ‰‰〷‰N‰‰Nc
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note The card can be normal IC card, or encrypted card. ● If the QR Code Scanning ‰‰ncti‰n is enabled, you can put the QR code in front of the device ● camera to ‰‰‰‰‰ntic‰‰‰ via QR code. - Page 80 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-11 Disable ‰‰〷‰n‰‰nc‰ Mode Set the ‰‰〷‰n‰‰nc‰ Mode as Disable. You will not view or c‰n‰〶‰‰r‰ the ‰‰〷‰n‰‰nc‰ status on the ‰n‰ti‰‰ page. And the system will follow the ‰‰〷‰n‰‰nc‰ rule that c‰n‰〶‰‰r‰‰ on the ‰‰‰tf‰rm‰...
-
Page 81: Set Manual ‰‰〷‰N‰‰Nc‰ Via Device
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 7.6.2 Set Manual ‰‰〷‰n‰‰nc‰ via Device Set the ‰‰〷‰n‰‰nc‰ mode as manual, and you should select a status manually when you take ‰‰〷‰n‰‰nc‰‰ Before You Start Add at least one user, and set the user's ‰‰‰‰‰ntic‰ti‰n mode. For details, see User Management. - Page 82 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-12 Manual ‰‰〷‰n‰‰nc‰ Mode 3. Enable the ‰‰〷‰n‰‰nc‰ Status Required. 4. Enable a group of ‰‰〷‰n‰‰nc‰ status. Note The ‰‰〷‰n‰‰nc‰ Property will not be changed. 5. ‰‰ti‰n‰‰‰ Select an status and change its name if required.
-
Page 83: Set Auto ‰‰〷‰N‰‰Nc‰ Via Device
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Result You should select an ‰‰〷‰n‰‰nc‰ status manually ‰ft‰r ‰‰‰‰‰ntic‰ti‰n‰ Note If you do not select a status, the ‰‰‰‰‰ntic‰ti‰n will be failed and it will not be marked as a valid ‰‰〷‰n‰‰nc‰‰... - Page 84 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-13 Auto ‰‰〷‰n‰‰nc‰ Mode 3. Enable the ‰‰〷‰n‰‰nc‰ Status ‰‰ncti‰n‰ 4. Enable a group of ‰‰〷‰n‰‰nc‰ status. Note The ‰‰〷‰n‰‰nc‰ Property will not be changed. 5. ‰‰ti‰n‰‰‰ Select an status and change its name if required.
-
Page 85: Set Manual And Auto ‰‰〷‰N‰‰Nc‰ Via Device
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 6. Set the status' schedule. 1) Tap ‰‰〷‰n‰‰nc‰ Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected ‰‰〷‰n‰‰nc‰ status's start tim‰ of the day. 4) Tap C‰n‰〶‰m. - Page 86 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-14 Manual and Auto Mode 3. Enable the ‰‰〷‰n‰‰nc‰ Status ‰‰ncti‰n‰ 4. Enable a group of ‰‰〷‰n‰‰nc‰ status. Note The ‰‰〷‰n‰‰nc‰ Property will not be changed. 5. ‰‰ti‰n‰‰‰ Select an status and change its name if required.
-
Page 87: Basic ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 6. Set the status' schedule. 1) Tap ‰‰〷‰n‰‰nc‰ Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected ‰‰〷‰n‰‰nc‰ status's start tim‰ of the day. 4) Tap OK. - Page 88 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-15 Basic ‰‰〷呠n‰‰ Page Sound ‰‰〷呠n‰‰ You can enable/disable the voice prompt ‰‰ncti‰n and adjust the voice volume. Note You can set the voice volume between 0 and 10. 0 refers to silence.
- Page 89 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Time ‰‰〷呠n‰‰ Set the tim‰ zone, the device tim‰ and the DST. Sleeping (s) Set the device sleeping w‰‰tin‰ tim‰ (minute). When you are on the ‰n‰ti‰‰ page and if you set the sleeping tim‰ to 30 min, the device will sleep ‰ft‰r 30 min without any ‰‰‰r‰ti‰n‰...
-
Page 90: Set Biometric Parameters
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the Philippines, etc. 7.8 Set Biometric Parameters You can customize the face parameters to improve the face r‰c‰‰n‰ti‰n performance. The c‰n‰〶‰‰r‰b‰‰... - Page 91 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-16 Biometric Parameters Page...
- Page 92 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Table 7-1 Face Picture Parameters Parameter ‰‰‰c‰‰‰ti‰n Face Liveness Level ‰ft‰r enabling face ‰nti‰′ ‰ ‰‰‰‰〶n‰ ‰‰ncti‰n‰ you can set the matching security level when performing live face ‰‰‰‰‰ntic‰ti‰n‰ R‰c‰‰n‰ti‰n Distance Set the valid distance between the user and the camera when ‰‰‰‰‰ntic‰tin‰‰...
-
Page 93: Preference ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Parameter ‰‰‰c‰‰‰ti‰n Set the matching value when ‰‰‰‰‰ntic‰tin‰ with face mask via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false r‰‰‰cti‰n rate. Face with Mask & Face (1:N) Set the matching value when ‰‰‰‰‰ntic‰tin‰... - Page 94 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-17 Preference ‰‰〷呠n‰‰ Shortcut Key Choose the shortcut key that displayed on the ‰‰‰‰‰ntic‰ti‰n page, including the password entering ‰‰ncti‰n‰ QR code ‰‰ncti‰n‰ the call ‰‰ncti‰n‰ and call type.
-
Page 95: Change Device Password
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note You can select call type from Call Room, Call Center, Call ‰‰‰c‰‰〶‰‰ Room No. and Call APP. Password Enable this ‰‰ncti‰n amd you can enter the password to ‰‰‰‰‰ntic‰‰‰ via password. QR Code You can use the QR code scanning ‰‰ncti‰n on the ‰‰‰‰‰ntic‰ti‰n interface. -
Page 96: Ntic‰Ti‰N ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note If you forget your password, you can tap Forgot Password and change the password. For details, see Forgot Password . 4. Enter new password and c‰n‰〶rm the password. C‰‰ti‰n The password strength of the device can be ‰‰‰‰m‰tic‰‰‰y checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case ‰‰‰〷‰r‰‰... - Page 97 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Figure 7-18 ‰‰‰‰‰ntic‰ti‰n ‰‰〷呠n‰‰ The available parameters ‰‰‰cr‰‰ti‰n‰ are as follows:...
- Page 98 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Table 7-2 Access Control Parameters ‰‰‰c‰‰‰ti‰n‰ Parameter ‰‰‰c‰‰‰ti‰n Terminal Auth. Mode (Terminal Select the face r‰c‰‰n‰ti‰n terminal's ‰‰‰‰‰ntic‰ti‰n mode. You ‰‰‰‰‰ntic‰ti‰n Mode) can also customize the ‰‰‰‰‰ntic‰ti‰n mode. Note Only the device with the ‰〶n‰‰r‰r‰n‰ module supports the ●...
-
Page 99: System Maintenance
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Parameter ‰‰‰c‰‰‰ti‰n The PIN is set on the device or Web. You cannot set the PIN on other ‰‰‰tf‰rm‰ 7.12 System Maintenance You can view the device system ‰n‰‰rm‰ti‰n and capacity. You can also upgrade device, view the device user manual, restore the system to factory ‰‰〷呠n‰‰‰... - Page 100 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Long tap , and enter admin password to view device version ‰n‰‰rm‰ti‰n‰ Face Parameter Custom ‰nti‰‰‰‰‰‰〶n‰ ‰‰‰‰cti‰n Face Liveness Level ‰ft‰r enabling face ‰nti‰‰‰‰‰‰〶n‰ ‰‰ncti‰n‰ you can set the matching security level when performing live face ‰‰‰‰‰ntic‰ti‰n‰...
- Page 101 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Restore to Default ‰‰〷呠n‰‰ All parameters, except for the c‰mm‰n‰c‰ti‰n ‰‰〷呠n‰‰‰ remotely imported user ‰n‰‰rm‰ti‰n‰ will be restored to the default ‰‰〷呠n‰‰‰ The system will reboot to take ‰‰〶‰c‰‰ Reboot The device will reboot ‰ft‰r the c‰n‰〶rm‰ti‰n‰...
-
Page 102: Chapter 8 Quick ‰‰‰‰‰Ti‰N Via Web Browser
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Chapter 8 Quick ‰‰‰‰‰ti‰n via Web Browser 8.1 Change Device Password You can change the device password. Before You Start Make sure the device is ‰ctiv‰‰‰‰‰ For details, see ‰‰‰〷‰‰‰〷‰n. Steps 1. On the Device for Management page, click →... -
Page 103: Time ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 8.3 Time ‰‰〷呠n‰‰ Set Time and DST Click → Time ‰‰〷呠n‰‰ . Time Zone Select the device located tim‰ zone from the drop-down list. Time Sync. You should set the NTP server's IP address, port No., and interval. -
Page 104: Administrator ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual If you enable this ‰‰ncti‰n‰ you can save the picture captured by linked camera to the device. Click Next to complete the ‰‰〷呠n‰‰‰ 8.5 Administrator ‰‰〷呠n‰‰ Steps → Administrator ‰‰〷呠n‰‰ . 1. Click 2. - Page 105 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Set the device installed ‰〶‰‰r No. Note The main door ‰‰‰ti‰n No. is 0, and the sub door ‰‰‰ti‰n No. ranges from 1 to 16. Community No. Set the device community No. Building No.
-
Page 106: Chapter 9 ‰‰‰‰‰Ti‰N Via Web Browser
Answer the security q‰‰‰ti‰n‰‰ E-mail ‰‰‰‰‰〶c‰ti‰n 1. Export the QR code and send it to pw_recovery@hikvision.com as ‰‰〷‰c‰m‰n‰‰ 2. You will receive a v‰r‰‰〶c‰ti‰n code within 5 minutes in your reserved email. 3. Enter the v‰r‰‰〶c‰ti‰n code into the v‰r‰‰〶c‰ti‰n code ‰〶‰‰‰ to verify your ‰‰‰nti‰〶c‰ti‰n‰... -
Page 107: Person Management
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Set the volume when ‰‰‰rtin‰ live view. Note If you adjust the volume when ‰‰‰rtin‰ two-way audio, you may hear a repeated sounds. You can capture image when ‰‰‰rtin‰ live view. Select the streaming type when ‰‰‰rtin‰ live view. - Page 108 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Add Basic ‰n‰‰‰m‰ti‰n Click User → Add to enter the Add Person page. Add the person's basic ‰n‰‰rm‰ti‰n‰ including the employee ID, the person's name, the and the user role. If you select Visitor as the user role, you can set the visit tim‰‰‰...
-
Page 109: Search Event
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Click Complete to save the ‰‰〷呠n‰‰‰ Add Face Picture Click User → Add to enter the Add Person page. Click + on the right to upload a face picture from the local PC. -
Page 110: View Device ‰N‰‰Rm‰Ti‰N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Record File ‰‰〷呠n‰‰ Click C‰n‰〶‰‰‰‰ti‰n → Local to enter the Local page. Select a record ‰〶‰‰ size and select a saving path from your local computer and click Save. You can also click Open to open the ‰〶‰‰ folder to view details. -
Page 111: Set Dst
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 9.6.4 Set DST Steps 1. Click C‰n‰〶‰‰‰‰ti‰n → System → System ‰‰〷呠n‰‰ → Time ‰‰〷呠n‰‰ . Figure 9-2 DST Page 2. Enable DST. 3. Set the DST start tim‰‰ end tim‰ and bias tim‰‰... -
Page 112: Account Security ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 9.6.6 Account Security ‰‰〷呠n‰‰ You can change the security q‰‰‰ti‰n‰ and answers, or the email address for the device. ‰ft‰r change the ‰‰〷呠n‰‰‰ once you forgot the device password, you should answer the new q‰‰‰ti‰n‰ or use the new email address to reset the device password. - Page 113 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Select a NIC type from the drop-down list. By default, it is Auto. DNS Server Set the preferred DNS server and the Alternate DNS server according to your actual need. Set Wi-Fi Parameters Set the Wi-Fi parameters for device wireless c‰nn‰cti‰n‰...
- Page 114 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Set Port Parameters Set the HTTP, HTTPS, HTTP Listening, RTSP and Server port parameters. Click C‰n‰〶‰‰‰‰ti‰n → Network → Network Service → HTTP(S) . HTTP It refers to the port through which the browser accesses the device. For example, when the HTTP Port is m‰‰‰‰〶‰‰...
-
Page 115: Set Video And Audio Parameters
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note 6 to 12 ‰‰‰〷‰r‰ (a to z, A to Z) or numbers (0 to 9), case ‰‰n‰‰tiv‰‰ You are recommended to use a c‰mb‰n‰ti‰n of no less than 8 ‰‰‰〷‰r‰ or numbers. -
Page 116: Access Control ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Set Video Parameters Click C‰n‰〶‰‰‰‰ti‰n → Video/Audio → Video . Figure 9-4 Video ‰‰〷呠n‰‰ Page Set the camera name, stream type, video type, r‰‰‰‰‰ti‰n‰ bit rate type, Max. bit rate and I Frame Interval. - Page 117 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Click Save to save the ‰‰〷呠n‰‰ ‰ft‰r the c‰n‰〶‰‰r‰ti‰n‰ If select Terminal Main: Terminal/Terminal Type/Terminal Model Select terminal and get the terminal ‰‰‰cr‰‰ti‰n‰ They are read-only. Enable ‰‰‰‰‰ntic‰ti‰n Device Enable the ‰‰‰‰‰ntic‰ti‰n ‰‰ncti‰n‰...
- Page 118 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Enable to report alarm when the card reading ‰‰〷‰m‰‰‰ reach the set value. C‰mm‰n‰c‰ti‰n with Controller Every When the access control device cannot connect with the card reader for longer than the set tim‰‰...
- Page 119 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Open ‰‰‰‰ti‰n Set the door unlocking ‰‰r‰ti‰n‰ If the door is not opened for the set tim‰‰ the door will be locked. Door Open Timeout Alarm An alarm will be triggered if the door has not been closed within the c‰n‰〶‰‰r‰‰ tim‰ ‰‰r‰ti‰n‰...
- Page 120 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Set Terminal Parameters You can set terminal parameters for accessing. Click C‰n‰〶‰‰‰‰ti‰n → Access Control → Terminal Parameters . You can set Working Mode as Access Control Mode. The access control mode is the device normal mode.
-
Page 121: Card ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Steps Note Some device models do not support this ‰‰ncti‰n‰ Refer to the actual products when c‰n‰〶‰‰r‰ti‰n‰ 1. Click C‰n‰〶‰‰‰‰ti‰n → Access Control → Wiegand ‰‰〷呠n‰‰ . 2. Check Wiegand to enable the Wiegand ‰‰ncti‰n‰... -
Page 122: Video Intercom ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Enable the ‰‰ncti‰n and set the ‰ncry‰ti‰n sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. Enable EM Card Enable EM card and ‰‰‰‰‰ntic‰tin‰ by ‰r‰‰‰ntin‰ EM card is available. - Page 123 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note If you change the device type, you should reboot the device. Floor No. Set the device installed ‰〶‰‰r No. Set the device No. Note If you change the No., you should reboot the device.
-
Page 124: Time And ‰‰〷‰N‰‰Nc‰ ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual SIP Server IP Address Set the IP address of the SIP server. Main ‰‰‰ti‰n IP IP address of the main ‰‰‰ti‰n‰ 3. Click Save. Press B‰‰〷‰n to Call Steps 1. Click Intercom → Press B‰‰〷‰n to Call to enter the ‰‰〷呠n‰‰ page. - Page 125 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Time ‰‰〷呠n‰‰ Steps 1. Click C‰n‰〶‰‰‰‰ti‰n → Time ‰‰〷呠n‰‰ to enter the ‰‰〷呠n‰‰ page. 2. Select Status Type. 3. ‰‰ti‰n‰‰‰ Edit Schedule Name according to the actual needs. 4. Drag mouse to set the schedule.
- Page 126 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Before You Start Add at least one user, and set the user's ‰‰‰‰‰ntic‰ti‰n mode. For details, see User Management. Steps 1. Click C‰n‰〶‰‰‰‰ti‰n → ‰‰〷‰n‰‰nc‰ to enter the ‰‰〷呠n‰‰ page. 2. Set the ‰‰〷‰n‰‰nc‰ Mode as Auto.
-
Page 127: Set Privacy Parameters
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual 9.6.14 Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters. Go to C‰n‰〶‰‰‰‰ti‰n → Security → Privacy ‰‰〷呠n‰‰ Event Storage ‰‰〷呠n‰‰ Select a method to delete the event. You can select from Delete Old Events Periodically, Delete Old Events by ‰‰‰c‰‰〶‰‰... -
Page 128: Set Password Mode
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Clear All Pictures in Device Note All pictures cannot be restored once they are deleted. Clear Registered Face Pictures All registered pictures in the device will be deleted. Clear Captured Pictures All captured pictures in the device will be deleted. - Page 129 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Enable or disable the live face ‰‰‰‰cti‰n ‰‰ncti‰n‰ If enabling the ‰‰ncti‰n‰ the device can recognize whether the person is a live one or not. Note Biometric r‰c‰‰n‰ti‰n products are not completely applicable to ‰nti‰‰‰‰‰‰〶n‰ environments. If you require a higher security level, use m‰‰ti‰‰‰...
- Page 130 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Set the matching threshold when ‰‰‰‰‰ntic‰tin‰ via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false r‰‰‰cti‰n rate Face with Mask ‰‰‰‰cti‰n ‰ft‰r enabling the face without mask ‰‰‰‰cti‰n‰...
-
Page 131: Preference ‰‰〷呠N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual If the person do not wear the hard hat when ‰‰‰‰‰ntic‰tin‰‰ the device will pop up a prompt and the door will keep closed. Fingerprint Security Level Select the ‰〶n‰‰r‰r‰n‰ security level. The higher is the security level, the lower is the false acceptance rate (FAR). - Page 132 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Click Media Library Management → + to upload the picture from the local PC. Note Only the format of JPG is supported. Each picture should be smaller than 1 MB with r‰‰‰‰‰ti‰n up to 1920*1280. Up to 8 pictures are supported.
-
Page 133: Upgrade And Maintenance
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note If ‰‰‰‰‰ntic‰ti‰n is failed in the c‰n‰〶‰‰r‰‰ tim‰ ‰‰r‰ti‰n‰ the device will broadcast the c‰n‰〶‰‰r‰‰ content. 3) Enter the audio content. 4) ‰‰ti‰n‰‰‰ Repeat substep 1 to 3. 5) ‰‰ti‰n‰‰‰ Click to delete the c‰n‰〶‰‰r‰‰ tim‰ ‰‰r‰ti‰n‰... -
Page 134: Restore Parameters
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Note Do not power ‰‰〶 during the upgrading. Restore Parameters Click Maintenance and Security → Maintenance → Backup and Reset . Restore All All parameters will be restored to the factory ‰‰〷呠n‰‰‰ You should ‰ctiv‰‰‰ the device before usage. -
Page 135: Device Debugging
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual The lock ‰‰r‰ti‰n ‰ft‰r enabling Lock Face for ‰nti‰‰‰‰‰‰〶n‰ ‰‰‰‰‰cti‰n when ‰nti‰‰‰‰‰‰〶n‰ ‰‰‰‰cti‰n failed. Unlock You can click Unlock according to your needs. Version ‰n‰‰‰m‰ti‰n You can view the device ‰n‰‰rm‰ti‰n‰ 9.6.19 Device Debugging You can set device debugging parameters. -
Page 136: Rti‰〶C‰‰‰ Management
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual High security level for user ‰n‰‰rm‰ti‰n v‰r‰‰〶c‰ti‰n when logging in the client ‰‰ftw‰r‰‰ C‰m‰‰tib‰‰ Mode The user ‰n‰‰rm‰ti‰n v‰r‰‰〶c‰ti‰n is c‰m‰‰tib‰‰ with the old client ‰‰ftw‰r‰ version when logging in. 9.6.22 C‰‰ti‰〶c‰‰‰ Management It helps to manage the server/client c‰rti‰〶c‰‰‰‰... - Page 137 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Install CA C‰‰ti‰〶c‰‰‰ Before You Start Prepare a CA c‰rti‰〶c‰‰‰ in advance. Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → System → Security → C‰‰ti‰〶c‰‰‰ Management . 2. Create an ID in the Inport CA C‰‰ti‰〶c‰‰‰ area.
-
Page 138: Chapter 10 Other ‰‰‰Tf‰‰M‰ To C‰N
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Chapter 10 Other ‰‰‰tf‰‰m‰ to C‰n‰〶‰‰‰‰ You can also c‰n‰〶‰‰r‰ the device via iVMS-4200 Client ‰‰ftw‰r‰ or HikCentral Access Control. For details, see the ‰‰‰tf‰rm‰‰ user manual. iVMS-4200 Client ‰‰‰〶w‰‰‰ Click/tap the link to view the client ‰‰ftw‰r‰‰‰ user manual. -
Page 139: Appendix A. Tips For Scanning Fingerprint
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger ‰‰r‰‰〶n‰‰r‰ middle ‰〶n‰‰r or the third ‰〶n‰‰r‰ Correct Scanning The ‰〶‰‰r‰ displayed below is the correct way to scan your ‰〶n‰‰r‰ You should press your ‰〶n‰‰r on the scanner horizontally. The center of your scanned ‰〶n‰‰r should align with the scanner center. - Page 140 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid c‰n‰‰ti‰n‰ and rain. When it is dry, the scanner may not recognize your ‰〶n‰‰r‰r‰n‰ successfully. You can blow your ‰〶n‰‰r and scan again.
-
Page 141: Appendix B. Tips When C‰‰‰‰Ctin‰‰C‰M‰‰‰‰N‰ Face Picture
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Appendix B. Tips When C‰‰‰‰ctin‰‰C‰m‰‰‰‰n‰ Face Picture The ‰‰‰‰ti‰n when c‰‰‰‰ctin‰ or comparing face picture is as below: ‰‰‰‰ti‰n‰ (Recommended Distance: 0.5 m) Expression Keep your expression naturally when c‰‰‰‰ctin‰ or comparing face pictures, just like the ●... - Page 142 DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Size Make sure your face is in the middle of the c‰‰‰‰ctin‰ window.
-
Page 143: Appendix C. Tips For ‰N‰‰‰‰‰‰Ti‰N Environment
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Appendix C. Tips for ‰n‰‰‰‰‰‰ti‰n Environment 1. Light Source ‰‰‰‰m‰n‰ti‰n Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Install the device at least 2 meters away from the light, and at least 3 meters away from the window or door. -
Page 144: Appendix D. Dimension
DS-K1T341C Series Face R‰c‰‰n‰ti‰n Terminal User Manual Appendix D. Dimension Figure D-1 Dimension... - Page 145 UD27829B-B...
Need help?
Do you have a question about the DS-KIT341CMF and is the answer not in the manual?
Questions and answers