HIKVISION DS-K1T981 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. IP Access Controllers
  5. DS-K1T981 Series
  6. User manual
HIKVISION DS-K1T981 Series User Manual

HIKVISION DS-K1T981 Series User Manual

Access control terminal
Hide thumbs Also See for DS-K1T981 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1T981 Series Access Control Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K1T981 Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-K1T981 Series

Summary of Contents for HIKVISION DS-K1T981 Series

  • Page 1 DS-K1T981 Series Access Control Terminal User Manual...
  • Page 2 ● Products described in this Document, which may include licenses obtained from third ‰‰‰ti‰‰‰ Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part ● of this Document may be excerpted, copied, translated, or m‰‰‰‰〶‰‰ in whole or in part by any means without w‰‰‰〷‰n permission.
  • Page 3 LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY ●...
  • Page 4 DS-K1T981 Series Access Control Terminal User Manual Symbol C‰nv‰nti‰n‰ The symbols that may be found in this document are ‰‰‰〶n‰‰ as follows. Symbol ‰‰‰c‰‰‰ti‰n Indicates a hazardous ‰‰‰‰‰ti‰n which, if not avoided, will or could Danger result in death or serious injury.
  • Page 5 DS-K1T981 Series Access Control Terminal User Manual Regulatory ‰n‰‰‰m‰ti‰n FCC ‰n‰‰‰m‰ti‰n Please take ‰‰〷‰nti‰n that changes or m‰‰‰‰〶c‰ti‰n not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K1T981 Series Access Control Terminal User Manual under the EMC ‰‰‰‰ctiv‰ 2014/30/EU, RE ‰‰‰‰ctiv‰ 2014/53/EU,the RoHS ‰‰‰‰ctiv‰ 2011/65/EU 2012/19/EU (WEEE ‰‰‰‰ctiv‰)‰ Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated c‰‰‰‰cti‰n points.
  • Page 7 DS-K1T981 Series Access Control Terminal User Manual Safety ‰n‰‰‰‰cti‰n These ‰n‰‰‰‰cti‰n‰ are intended to ensure that user can use the product correctly to avoid danger or property loss. The ‰‰‰c‰‰ti‰n measure is divided into Dangers and ‰‰‰ti‰n‰‰ Dangers: N‰‰‰‰ctin‰ any of the warnings may cause serious injury or death.
  • Page 8 DS-K1T981 Series Access Control Terminal User Manual C‰‰ti‰n‰‰ Do not drop the device or subject it to physical shock, and do not expose it to high ● ‰‰‰c‰‰‰m‰‰n‰ti‰m ‰‰‰‰‰ti‰n‰ Avoid the equipment ‰n‰‰‰‰‰‰ti‰n on v‰b‰‰ti‰n‰ surface or places subject to shock (ignorance can cause equipment damage).
  • Page 9 DS-K1T981 Series Access Control Terminal User Manual Available Models Product Name Model Access Control Terminal DS-K1T981M DS-K1T981MF Use only power supplies listed in the user ‰n‰‰‰‰cti‰n‰‰ Model Manufacturer Standard C2000IC12.0-24P-DE MOSO Power Supply Technology Co., Ltd. C2000IC12.0-24P-GB MOSO Power Supply Technology Co., Ltd.

  • Page 10: Table Of Contents

    DS-K1T981 Series Access Control Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 1.2.1 Features (Normal Series) ....................1 Chapter 2 Appearance ........................ 3 Chapter 3 ‰n‰‰‰‰‰‰ti‰n ......................... 5 3.1 ‰n‰‰‰‰‰‰ti‰n Environment ......................5 3.2 Flush M‰‰ntin‰...
  • Page 11 DS-K1T981 Series Access Control Terminal User Manual 6.1 Select Language ........................35 6.2 Set ‰‰‰‰‰c‰ti‰n Mode ......................36 6.3 ‰n‰‰‰‰‰‰ti‰n Angle ......................... 38 6.4 Set Network Parameters ...................... 38 6.5 Access to ‰‰‰tf‰‰m ....................... 40 6.6 Privacy ‰‰〷呠n‰‰ ........................42 6.7 Set Administrator .........................
  • Page 12 DS-K1T981 Series Access Control Terminal User Manual 7.4.1 Delete Data ......................... 66 7.4.2 Import Data ......................... 66 7.4.3 Export Data ......................... 67 7.5 ‰‰‰nti‰y ‰‰‰‰‰ntic‰ti‰n ......................67 7.5.1 ‰‰‰‰‰ntic‰‰‰ via Single ‰‰‰‰‰nti‰‰ ................67 7.5.2 ‰‰‰‰‰ntic‰‰‰ via M‰‰ti‰‰‰ ‰‰‰‰‰nti‰‰ ................68 7.6 Basic ‰‰〷呠n‰‰...
  • Page 13 DS-K1T981 Series Access Control Terminal User Manual 8.5.1 Set Local Parameters ....................91 8.5.2 View Device ‰n‰‰‰m‰ti‰n ..................... 91 8.5.3 Set Time ........................91 8.5.4 Set DST ........................92 8.5.5 View Open Source ‰‰ftw‰‰‰ License ................92 8.5.6 Upgrade and Maintenance ..................92 8.5.7 Log Query ........................
  • Page 14 DS-K1T981 Series Access Control Terminal User Manual 9.2.3 Manage Added Devices .................... 134 9.3 Group Management ......................135 9.3.1 Add Group ......................... 135 9.3.2 Import Resources to Group ..................135 9.4 Person Management ......................136 9.4.1 Add ‰‰‰‰n‰‰‰ti‰n ...................... 136 9.4.2 Import and Export Person ‰‰‰nti‰y ‰n‰‰‰m‰ti‰n ............

  • Page 15: Chapter 1 Overview

    DS-K1T981 Series Access Control Terminal User Manual Chapter 1 Overview 1.1 Overview Access control terminal is a kind of access control device for iris ‰‰c‰‰n‰ti‰n and face ‰‰c‰‰n‰ti‰n‰ which is mainly applied in security access control systems, such as ‰‰‰‰‰tic centers, airports, university campuses, alarm centrals, dwellings, etc.
  • Page 16 DS-K1T981 Series Access Control Terminal User Manual Support mask wearing ‰‰‰‰cti‰n ● Support tamper alarm, door opening alarm by external force, duress card and duress password ● alarm Support m‰‰ti‰‰‰ display modes, including normal mode, ‰‰v‰‰ti‰‰m‰n‰ mode, and simple mode ●...

  • Page 17: Chapter 2 Appearance

    DS-K1T981 Series Access Control Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed ‰n‰‰‰m‰ti‰n of the access control terminal: Figure 2-1 Access Control Terminal Diagram Table 2-1 ‰‰‰c‰‰‰ti‰n of Access Control Terminal Name USB Interface Loudspeaker...
  • Page 18 DS-K1T981 Series Access Control Terminal User Manual Name Card ‰‰‰‰‰ntin‰ Area Fingerprint ‰‰c‰‰n‰ti‰n Area Camera IR Light SIM Card Slot (Reserved) USB Interface (Reserved) Debugging Port (For debugging only) Wiring Terminal Network Interface Tamper...

  • Page 19: Chapter 3 ‰N‰‰‰‰‰‰Ti‰N

    DS-K1T981 Series Access Control Terminal User Manual Chapter 3 ‰n‰‰‰‰‰‰ti‰n 3.1 ‰n‰‰‰‰‰‰ti‰n Environment Install the device at least 2 meters away from the light, and at least 3 meters away from the ● window or the door. Make sure the environment ‰‰‰‰m‰n‰ti‰n is more than 100 Lux.
  • Page 20 DS-K1T981 Series Access Control Terminal User Manual Figure 3-1 Install Gang Box 3. Secure the m‰‰ntin‰ plate on the bracket with 2 supplied screws (SC-K1M4X6-SUS).
  • Page 21 DS-K1T981 Series Access Control Terminal User Manual Figure 3-2 Install ‰‰‰ntin‰ Plate 4. Route the cable through the cable hole, wire the cables and insert the cables in the gang box.
  • Page 22 DS-K1T981 Series Access Control Terminal User Manual Figure 3-3 Apply Silicone Sealant Note Apply Silicone sealant among the cable wiring area to keep the raindrop from entering. 5. Align the device with the m‰‰ntin‰ plate, and secure the device on the m‰‰ntin‰ plate with 1...

  • Page 23: Surface M‰‰Ntin

    DS-K1T981 Series Access Control Terminal User Manual Figure 3-4 Secure Device 6. ‰ft‰‰ ‰n‰‰‰‰‰‰ti‰n‰ for the proper use of the device (outdoor use), ‰tic‰ the ‰‰‰‰‰cti‰n ‰〶‰m (parts of models supplied) on the screen. 3.3 Surface ‰‰‰ntin‰ Steps Note The ‰‰‰‰ti‰n‰‰ force shall be equal to three tim‰‰ the weight of the equipment. The equipment ad its associated m‰‰ntin‰...
  • Page 24 DS-K1T981 Series Access Control Terminal User Manual Figure 3-5 ‰‰‰ntin‰ Template 2. Drill 2 holes on the wall or other surface according to the Hole 1 on the m‰‰ntin‰ template. 3. Insert the ‰‰‰‰tic sleeve of the provided expansion screw into the punched hole.
  • Page 25 DS-K1T981 Series Access Control Terminal User Manual Figure 3-6 Install Bracket 5. Align the holes to the m‰‰ntin‰ plate and secure the m‰‰ntin‰ plate on the bracket with the 2 supplied screws (SC-K1M4×6-SUS).
  • Page 26 DS-K1T981 Series Access Control Terminal User Manual Figure 3-7 Install ‰‰‰ntin‰ Plate 6. Route the cable through the cable hole, wire the cables and insert the cables. Note If the device is installed outdoor, you should apply silicone sealant to the wiring exit to avoid...
  • Page 27 DS-K1T981 Series Access Control Terminal User Manual Figure 3-8 Apply Silicone Sealant 7. Align the device with the m‰‰ntin‰ plate and hang the device on the m‰‰ntin‰ plate. 8. Use 1 supplied screw (SC-KM3×6-T10-SUS) to secure the device and the m‰‰ntin‰ plate.

  • Page 28: Mount With Bracket

    DS-K1T981 Series Access Control Terminal User Manual Figure 3-9 Secure Device 9. ‰ft‰‰ ‰n‰‰‰‰‰‰ti‰n‰ for the proper use of the device (outdoor use), ‰tic‰ the ‰‰‰‰‰cti‰n ‰〶‰m (parts of models supplied) on the screen. 3.4 Mount With Bracket 3.4.1 ‰‰‰‰‰‰‰ti‰n before ‰‰‰ntin‰ with Bracket Steps 1.
  • Page 29 DS-K1T981 Series Access Control Terminal User Manual Figure 3-10 Drill Holes on ‰‰‰n‰ti‰‰ 2. If the ‰n‰‰‰‰‰‰ti‰n angle needs to be 180° perpendicular to the body of the ‰‰‰n‰ti‰‰‰ the following ‰‰‰‰‰ti‰n‰ are required. 1) Take ‰‰〶 the 3 screws shown in the following ‰〶‰‰‰‰‰...

  • Page 30: Bracket M‰‰Ntin

    DS-K1T981 Series Access Control Terminal User Manual 3.4.2 Bracket ‰‰‰ntin‰ Steps 1. Install the m‰‰ntin‰ template on the bracket with 4 supplied screws (SC-K1M4×8-SUS). Figure 3-13 Install ‰‰‰ntin‰ Template 2. Remove the back cover plate, route the cables through the cable hole, and connect them to the corresponding external devices' cables.

  • Page 31: Mount With Cylinder Bracket

    DS-K1T981 Series Access Control Terminal User Manual Figure 3-14 Install Device 4. ‰ft‰‰ ‰n‰‰‰‰‰‰ti‰n‰ for the proper use of the device (outdoor use), ‰tic‰ the ‰‰‰‰‰cti‰n ‰〶‰m (parts of models supplied) on the screen. 3.4.3 Mount With Cylinder Bracket ‰‰‰‰‰‰‰ti‰n before ‰‰‰ntin‰ with Bracket Make sure you have drilled holes on the ‰‰‰n‰ti‰‰‰...
  • Page 32 DS-K1T981 Series Access Control Terminal User Manual Figure 3-15 Drill Holes on ‰‰‰n‰ti‰‰ 3. Solder the other four holes, polish the surface, and implement wire drawing. 4. Solder circular tubes on the ‰‰‰n‰ti‰‰′‰ inner surface to avoid water from entering.
  • Page 33 DS-K1T981 Series Access Control Terminal User Manual Figure 3-16 Solder Tubes Cylinder Bracket ‰‰‰ntin‰ Steps 1. Install the base on the ‰‰‰n‰ti‰‰‰ 1) Align the hole on the ‰‰‰n‰ti‰‰ and place the base on the ‰‰‰n‰ti‰‰‰ 2) Rotate the base to the acquired place and make sure the device will face a correct ‰‰‰‰cti‰n‰...
  • Page 34 DS-K1T981 Series Access Control Terminal User Manual Figure 3-17 Install Base 2. Fix the m‰‰ntin‰ plate into the bracket by 4 SC-K1M4×8-SUS screws. Figure 3-18 Fix ‰‰‰ntin‰ Plate 3. Route the cables through the cable hole on the ‰‰‰n‰ti‰‰‰ 4. Fix the face ‰‰c‰‰n‰ti‰n terminal into the m‰‰ntin‰ plate with 1 SC-KM3×6-T10-SUS screw.
  • Page 35 DS-K1T981 Series Access Control Terminal User Manual Figure 3-19 Fix ‰‰‰ntin‰ Plate 5. ‰ft‰‰ ‰n‰‰‰‰‰‰ti‰n‰ for the proper use of the device (outdoor use), ‰tic‰ the ‰‰‰‰‰cti‰n ‰〶‰m (parts of models supplied) on the screen.

  • Page 36: Chapter 4 Wiring

    DS-K1T981 Series Access Control Terminal User Manual Chapter 4 Wiring The device supports c‰nn‰ctin‰ to the RS-485 terminal, the door lock, the exit b‰‰〷‰n‰ the alarm output/input devices, the Wiegand card reader, the access controller, and the power supply. You can wire the peripherals according to the ‰‰‰c‰‰‰ti‰n‰...
  • Page 37 DS-K1T981 Series Access Control Terminal User Manual Figure 4-1 Terminal Diagram The ‰‰‰c‰‰‰ti‰n‰ of the terminals are as follows: Table 4-1 Terminal ‰‰‰c‰‰‰ti‰n‰ Group F‰ncti‰n Color Name ‰‰‰c‰‰‰ti‰n Group A Power Input +12 V 12 VDC Power Supply Black Ground...

  • Page 38: Wire Normal Device

    DS-K1T981 Series Access Control Terminal User Manual Group F‰ncti‰n Color Name ‰‰‰c‰‰‰ti‰n Group B Alarm Input Yellow/Blue Alarm Input 1 Black Ground Yellow/Orange IN2 Alarm Input 2 Alarm Output Yellow/Purple Alarm Output Wiring Yellow/Brown Yellow/Red Group C RS-485 Yellow 485+...

  • Page 39: Wire Secure Door Control Unit

    DS-K1T981 Series Access Control Terminal User Manual Figure 4-2 Device Wiring Note If connects to an access controller, you should set the Wiegand ‰‰‰‰cti‰n as Output to transmit ● ‰‰‰‰‰ntic‰ti‰n ‰n‰‰‰m‰ti‰n to the access controller. For details about Wiegand ‰‰‰‰cti‰n ‰‰〷呠n‰‰‰ see Set Wiegand Parameters .

  • Page 40: Wire Fire Module

    DS-K1T981 Series Access Control Terminal User Manual Note The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12V, 0.5A. 4.4 Wire Fire Module 4.4.1 Wiring Diagram of Door Open When Powering ‰‰〶...
  • Page 41 DS-K1T981 Series Access Control Terminal User Manual Figure 4-5 Wire Secure Door Control Unit Type 2 Note The ‰〶‰‰ system (NO and COM, normally open when powering ‰‰〶) is connected with the lock and the power supply in series. When an ‰〶‰‰ alarm is triggered, the door remains open. In normal tim‰‰‰...

  • Page 42: Wiring Diagram Of Door Locked When Powering

    DS-K1T981 Series Access Control Terminal User Manual Figure 4-7 Wiring Secure Door Control Unit 4.4.2 Wiring Diagram of Door Locked When Powering ‰‰〶 Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering ‰‰〶...
  • Page 43 DS-K1T981 Series Access Control Terminal User Manual Figure 4-8 Device Wiring Figure 4-9 Wiring Diagram...

  • Page 44: Chapter 5 ‰Ctiv‰Ti‰N

    DS-K1T981 Series Access Control Terminal User Manual Chapter 5 ‰ctiv‰ti‰n You should ‰ctiv‰‰‰ the device before the ‰〶‰‰‰ login. ‰ft‰‰ powering on the device, the system will switch to Device ‰ctiv‰ti‰n page. ‰ctiv‰ti‰n via the device, SADP tool and the client ‰‰ftw‰‰‰ are supported.
  • Page 45 DS-K1T981 Series Access Control Terminal User Manual Figure 5-1 ‰ctiv‰ti‰n Page C‰‰ti‰n The password strength of the device can be ‰‰‰‰m‰tic‰‰‰y checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case ‰‰‰〷‰‰‰‰...

  • Page 46: Ctiv‰‰‰ Via Web Browser

    DS-K1T981 Series Access Control Terminal User Manual Proper c‰n‰〶‰‰‰‰ti‰n of all passwords and other security ‰‰〷呠n‰‰ is the responsibility of the installer and/or end-user. Note Characters containing admin and nimda are not supported to be set as ‰ctiv‰ti‰n password. ‰ft‰‰ ‰ctiv‰ti‰n‰ you should select an ‰‰‰‰‰c‰ti‰n mode. For details, see Set ‰‰‰‰‰‰‰ti‰n Mode .
  • Page 47 DS-K1T981 Series Access Control Terminal User Manual Before You Start Get the SADP ‰‰ftw‰‰‰ from the supplied disk or the ‰〶噠c‰‰‰ website ‰‰〷‰‰‰‰ ● www‰‰‰‰v‰‰‰‰n‰‰‰m‰‰n‰ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 48: Ctiv‰‰‰ Device Via Ivms-4200 Client ‰‰Ftw

    DS-K1T981 Series Access Control Terminal User Manual 5.4 ‰ctiv‰‰‰ Device via iVMS-4200 Client ‰‰‰〶w‰‰‰ For some devices, you are required to create the password to ‰ctiv‰‰‰ them before they can be added to the iVMS-4200 ‰‰ftw‰‰‰ and work properly. Steps Note This ‰‰ncti‰n should be supported by the device.

  • Page 49: Chapter 6 Quick ‰‰‰‰‰Ti‰N

    DS-K1T981 Series Access Control Terminal User Manual Chapter 6 Quick ‰‰‰‰‰ti‰n 6.1 Select Language You can select a language for the device system. ‰ft‰‰ the device ‰ctiv‰ti‰n‰ you can select a language for the device system. Figure 6-1 Select System Language...

  • Page 50: Set ‰‰‰‰‰C‰Ti‰N Mode

    DS-K1T981 Series Access Control Terminal User Manual Note ‰ft‰‰ you change the system language, the device will reboot ‰‰‰‰m‰tic‰‰‰y‰ 6.2 Set ‰‰‰‰‰c‰ti‰n Mode ‰ft‰‰ ‰ctiv‰tin‰ the device, you should select an ‰‰‰‰‰c‰ti‰n mode for b‰‰〷‰‰ device ‰‰‰‰‰c‰ti‰n‰ Steps 1. On the Welcome page, select Indoor or Others from the drop-down list.
  • Page 51 DS-K1T981 Series Access Control Terminal User Manual Figure 6-2 Welcome Page 2. Tap OK to save. Note You can also change the ‰‰〷呠n‰‰ in System ‰‰〷呠n‰‰. ● If you install the device indoors near the window or the face ‰‰c‰‰n‰ti‰n ‰‰ncti‰n is not ●...

  • Page 52: N‰‰‰‰‰‰Ti‰N Angle

    DS-K1T981 Series Access Control Terminal User Manual If you do not c‰n‰〶‰‰‰‰ the ‰‰‰‰‰c‰ti‰n mode and tap Next, the system will select Indoor by ● default. If you ‰ctiv‰‰‰ the device via other tools remotely, the system will select Indoor as the ●...
  • Page 53 DS-K1T981 Series Access Control Terminal User Manual Figure 6-3 Select Network Note Disconnect the wired network before c‰nn‰ctin‰ a Wi-Fi. 2. Tap Next. Wired Network Note Make sure the device has connected to a network.

  • Page 54: Access To ‰‰‰Tf‰‰M

    DS-K1T981 Series Access Control Terminal User Manual If enable DHCP, the system will assign the IP address and other parameters ‰‰‰‰m‰tic‰‰‰y‰ If disable DHCP, you should set the IP address, the subnet mask, and the gateway. Wi-Fi Select a Wi-Fi and enter the Wi-Fi's password to get connected.
  • Page 55 DS-K1T981 Series Access Control Terminal User Manual Figure 6-4 Access to Hik-Connect 2. Tap Next. Note If you tap Previous to return to the Wi-Fi c‰n‰〶‰‰‰‰ti‰n page, you need to tap the connected Wi- Fi or connect another Wi-Fi to enter the ‰‰‰tf‰‰m page again.

  • Page 56: Privacy ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual 6.6 Privacy ‰‰〷呠n‰‰ ‰ft‰‰ ‰ctiv‰ti‰n‰ ‰‰‰‰ctin‰ ‰‰‰‰‰c‰ti‰n mode, and ‰‰‰‰ctin‰ network, you should set the privacy parameters, including the picture uploading and storage. Select parameters according to your actual needs. Figure 6-5 Privacy Upload Pic.

  • Page 57: Set Administrator

    DS-K1T981 Series Access Control Terminal User Manual Save Pic. When Auth. (Save Picture When ‰‰‰‰‰ntic‰tin‰) If you enable this ‰‰ncti‰n‰ you can save the picture when ‰‰‰‰‰ntic‰tin‰ to the device. Save Registered Pic. (Save Registered Picture) The registered face picture will be saved to the system if you enable the ‰‰ncti‰n‰...
  • Page 58 DS-K1T981 Series Access Control Terminal User Manual Figure 6-6 Add Administrator Page 3. Select a c‰‰‰‰nti‰‰ to add. Note Up to one c‰‰‰‰nti‰‰ should be added. : Face forward at the camera. Make sure the face is in the face ‰‰c‰‰n‰ti‰n area. Click capture and click to c‰n‰〶‰m‰...
  • Page 59 DS-K1T981 Series Access Control Terminal User Manual You will enter the ‰‰‰‰‰ntic‰ti‰n page. Status Icon ‰‰‰c‰‰‰ti‰n Device is armed/not armed. Hik-Connect is enabled/disabled/enabled but not added. The device wired network is connected/not c‰nn‰c‰‰‰‰c‰nn‰ctin‰ failed. The device' Wi-Fi is enabled and connected/not connected/enabled but not connected.

  • Page 60: Chapter 7 Basic ‰‰‰‰‰Ti‰N

    DS-K1T981 Series Access Control Terminal User Manual Chapter 7 Basic ‰‰‰‰‰ti‰n 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device ‰‰‰‰‰ti‰n‰...
  • Page 61 DS-K1T981 Series Access Control Terminal User Manual Figure 7-1 Admin Login 2. ‰‰‰‰‰ntic‰‰‰ the administrator's face, ‰〶n‰‰‰‰‰‰n‰ or card to enter the home page.
  • Page 62 DS-K1T981 Series Access Control Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes ‰ft‰‰ 5 failed ‰〶n‰‰‰‰‰‰n‰ or card ‰‰〷‰m‰‰‰‰ 3. ‰‰ti‰n‰‰‰ Tap and you can enter the device ‰ctiv‰ti‰n password for login.

  • Page 63: Login By ‰Ctiv‰Ti‰N Password

    DS-K1T981 Series Access Control Terminal User Manual 7.1.2 Login by ‰ctiv‰ti‰n Password You should login the system before other device ‰‰‰‰‰ti‰n‰‰ If you do not c‰n‰〶‰‰‰‰ an administrator, you should follow the ‰n‰‰‰‰cti‰n‰ below to login. Steps 1. Long tap on the ‰n‰ti‰‰ page for 3 s and slide to the ‰‰ft‰‰‰‰‰‰ by following the gesture to enter password entering page.

  • Page 64: Mm‰N‰C‰Ti‰N ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual Figure 7-3 Home Page 7.2 C‰mm‰n‰c‰ti‰n ‰‰〷呠n‰‰ You can set the wired network, the Wi-Fi parameter, the RS-485 parameters, the Wiegand parameters, ISUP and access to Hik-Connect on the c‰mm‰n‰c‰ti‰n ‰‰〷呠n‰‰ page.

  • Page 65: Set Wired Network Parameters

    DS-K1T981 Series Access Control Terminal User Manual 7.2.1 Set Wired Network Parameters You can set the device wired network parameters, including the IP address, the subnet mask, the gateway, and DNS parameters. Steps 1. Tap Comm. (‰‰mm‰n‰c‰ti‰n ‰‰〷呠n‰‰) on the Home page to enter the ‰‰mm‰n‰c‰ti‰n ‰‰〷呠n‰‰...

  • Page 66: Set Wi-Fi Parameters

    DS-K1T981 Series Access Control Terminal User Manual 7.2.2 Set Wi-Fi Parameters You can enable the Wi-Fi ‰‰ncti‰n and set the Wi-Fi related parameters. Steps Note The ‰‰ncti‰n should be supported by the device. 1. Tap Comm. (‰‰mm‰n‰c‰ti‰n ‰‰〷呠n‰‰) on the Home page to enter the ‰‰mm‰n‰c‰ti‰n ‰‰〷呠n‰‰...

  • Page 67: Set Rs-485 Parameters

    DS-K1T981 Series Access Control Terminal User Manual 3. Enable the Wi-Fi ‰‰ncti‰n‰ 4. ‰‰n‰〶‰‰‰‰ the Wi-Fi parameters. - Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK. - If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And tap OK.

  • Page 68: Set Wiegand Parameters

    DS-K1T981 Series Access Control Terminal User Manual 4. Tap the back icon at the upper ‰‰ft corner and you should reboot the device if you change the parameters. 7.2.4 Set Wiegand Parameters You can set the Wiegand transmission ‰‰‰‰cti‰n‰ Steps 1.
  • Page 69 DS-K1T981 Series Access Control Terminal User Manual Steps 1. Tap Comm. → ISUP . Figure 7-8 ISUP ‰‰〷呠n‰‰ 2. Enable the ISUP ‰‰ncti‰n and set the ISUP server parameters. ISUP Version Set the ISUP version according to your actual needs.

  • Page 70: Tf‰‰M Access

    DS-K1T981 Series Access Control Terminal User Manual Set the ISUP server's IP address. Port No. Set the ISUP server's port No. Note Port No. Range: 0 to 65535. Device ID Set device serial no. Password If you choose V5.0, you should create an account and ISUP key. If you choose other version, you should create an ISUP account only.

  • Page 71: Add Administrator

    DS-K1T981 Series Access Control Terminal User Manual 7.3.1 Add Administrator The administrator can log in the device backend and c‰n‰〶‰‰‰‰ the device parameters. Steps 1. Long tap on the ‰n‰ti‰‰ page for 3 s and slide to the ‰‰ft‰‰‰‰‰‰ by following the gesture and enter the device backend.

  • Page 72: Add Face Picture

    DS-K1T981 Series Access Control Terminal User Manual Note Numbers, upper case ‰‰‰〷‰‰‰‰ lower case ‰‰‰〷‰‰‰‰ and special characters are allowed in the user ● name. Up to 32 characters are allowed in the user name. ● 5. ‰‰ti‰n‰‰‰ Add a face picture, ‰〶n‰‰‰‰‰‰n‰‰‰ cards, Pin or iris for the administrator.
  • Page 73 DS-K1T981 Series Access Control Terminal User Manual Note Numbers, upper case ‰‰‰〷‰‰‰‰ lower case ‰‰‰〷‰‰‰‰ and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the Face Picture ‰〶‰‰‰ to enter the face picture adding page.

  • Page 74: Add Fingerprint

    DS-K1T981 Series Access Control Terminal User Manual Note Make sure your face picture is in the face picture outline when adding the face picture. ● Make sure the captured face picture is in good quality and is accurate. ● For details about the ‰n‰‰‰‰cti‰n‰ of adding face pictures, see Tips When ‰‰‰‰‰‰tin‰‰...

  • Page 75: Add Card

    DS-K1T981 Series Access Control Terminal User Manual Note Numbers, upper case ‰‰‰〷‰‰‰‰ lower case ‰‰‰〷‰‰‰‰ and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the Fingerprint ‰〶‰‰‰ to enter the Add Fingerprint page.

  • Page 76: Add Iris

    DS-K1T981 Series Access Control Terminal User Manual Note Numbers, upper case ‰‰‰〷‰‰‰‰ lower case ‰‰‰〷‰‰‰‰ and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 6. Tap the Card ‰〶‰‰‰ and tap +.
  • Page 77 DS-K1T981 Series Access Control Terminal User Manual 4. Tap the Name ‰〶‰‰‰ and input the user name on the ‰‰ft keyboard. Note Numbers, upper case ‰‰‰〷‰‰‰‰ lower case ‰‰‰〷‰‰‰‰ and special characters are allowed in the user ● name. The suggested user name should be within 32 characters.

  • Page 78: View Pin Code

    DS-K1T981 Series Access Control Terminal User Manual Note Make sure your eyes in frame when adding the iris. ● Make sure the captured iris is in good quality and is accurate. ● Remove your glasses when adding the iris. ●...

  • Page 79: Set ‰‰‰‰‰Ntic‰Ti‰N Mode

    DS-K1T981 Series Access Control Terminal User Manual Administrator The user is the administrator. Except for the normal ‰‰〷‰n‰‰nc‰ ‰‰ncti‰n‰ the user can also enter the Home page to operate ‰ft‰‰ ‰‰‰‰‰ntic‰tin‰ the permission. Normal User The User is the normal user. The user can only ‰‰‰‰‰ntic‰‰‰ or take ‰‰〷‰n‰‰nc‰ on the ‰n‰ti‰‰...

  • Page 80: Data Management

    DS-K1T981 Series Access Control Terminal User Manual Note The employee ID cannot be edited. 7.4 Data Management You can delete data, import data, and export data. 7.4.1 Delete Data Delete user data. On the Home page, tap Data → Delete Data → User Data . All user data added in the device will be deleted.

  • Page 81: Export Data

    DS-K1T981 Series Access Control Terminal User Manual picture. The format should be JPEG or JPG. The ‰‰‰‰‰‰ti‰n should be 640 × 480 pixel or more than of 640 × 480 pixel. The picture size should be between 60 KB and 200 KB.

  • Page 82: Ntic‰‰‰ Via M‰‰Ti‰‰‰ ‰‰‰‰‰Nti

    DS-K1T981 Series Access Control Terminal User Manual QR Code or Password or Iris ‰‰‰‰‰ntic‰‰‰ face, ‰〶n‰‰‰‰‰‰n‰‰ card or QR code. Face Face forward at the camera and start ‰‰‰‰‰ntic‰ti‰n via face. Iris Look at the camera and make your eyes in frame and start ‰‰‰‰‰ntic‰ti‰n via iris.

  • Page 83: Basic ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual Note The card can be normal IC card, or encrypted card. ● If the QR Code Scanning ‰‰ncti‰n is enabled, you can put the QR code in front of the device ● camera to ‰‰‰‰‰ntic‰‰‰ via QR code.
  • Page 84 DS-K1T981 Series Access Control Terminal User Manual Figure 7-11 Basic ‰‰〷呠n‰‰ Page Shortcut Key Choose the shortcut key that displayed on the ‰‰‰‰‰ntic‰ti‰n page, including the QR code ‰‰ncti‰n‰ the call ‰‰ncti‰n‰ call type, and the password entering ‰‰ncti‰n‰ Note You can select call type from Call Room, Call Center, Call ‰‰‰c‰‰〶‰‰...

  • Page 85: Set Biometric Parameters

    DS-K1T981 Series Access Control Terminal User Manual When you tap the call b‰‰〷‰n on the ‰‰‰‰‰ntic‰ti‰n page, you should dial a room No. to call. Call Center When you tap the call b‰‰〷‰n on the ‰‰‰‰‰ntic‰ti‰n page, you can call the center directly.
  • Page 86 DS-K1T981 Series Access Control Terminal User Manual ‰‰〷呠n‰‰‰ hard hat ‰‰‰‰cti‰n‰ face with mask ‰‰‰‰cti‰n‰ iris ‰‰c‰‰n‰ti‰n interval, iris ‰‰c‰‰n‰ti‰n mode, and iris 1:N security level. Long tap on the ‰n‰ti‰‰ page for 3 s and login the home page. Tap Biometric and tap Face to enter the page.
  • Page 87 DS-K1T981 Series Access Control Terminal User Manual Parameter ‰‰‰c‰‰‰ti‰n Set the matching threshold when ‰‰‰‰‰ntic‰tin‰ via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false ‰‰‰‰cti‰n rate. ECO Mode (1:N) Set the matching threshold when ‰‰‰‰‰ntic‰tin‰...

  • Page 88: Set Access Control Parameters

    DS-K1T981 Series Access Control Terminal User Manual Table 7-2 Iris Parameters Parameter ‰‰‰c‰‰‰ti‰n Iris ‰‰c‰‰n‰ti‰n The tim‰ interval between two c‰ntin‰‰‰‰ iris ‰‰c‰‰n‰ti‰n‰ when Interval ‰‰‰‰‰ntic‰tin‰‰ Iris ‰‰c‰‰n‰ti‰n Mode Iris ‰‰c‰‰n‰ti‰n mode consists of single-eye mode and dual-eye mode. Iris 1:N Security Level Set the matching threshold when ‰‰‰‰‰ntic‰tin‰...

  • Page 89: Time And ‰‰〷‰N‰‰Nc‰ Status ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual Table 7-3 Access Control Parameters ‰‰‰c‰‰‰ti‰n‰ Parameter ‰‰‰c‰‰‰ti‰n Terminal Auth. Mode (Terminal Select the device's ‰‰‰‰‰ntic‰ti‰n mode. You can also customize ‰‰‰‰‰ntic‰ti‰n Mode) the ‰‰‰‰‰ntic‰ti‰n mode. Note Only the device with the ‰〶n‰‰‰‰‰‰n‰ module supports the ●...

  • Page 90: Disable ‰‰〷‰N‰‰Nc‰ Mode Via Device

    DS-K1T981 Series Access Control Terminal User Manual 7.9.1 Disable ‰‰〷‰n‰‰nc‰ Mode via Device Disable the ‰‰〷‰n‰‰nc‰ mode and the system will not display the ‰‰〷‰n‰‰nc‰ status on the ‰n‰ti‰‰ page. Tap T&A Status to enter the T&A Status page. Figure 7-14 Disable ‰‰〷‰n‰‰nc‰ Mode Set the ‰‰〷‰n‰‰nc‰...

  • Page 91: Set Auto ‰‰〷‰N‰‰Nc‰ Via Device

    DS-K1T981 Series Access Control Terminal User Manual Figure 7-15 Manual ‰‰〷‰n‰‰nc‰ Mode 3. Enable the ‰‰〷‰n‰‰nc‰ Status Required. 4. Enable a group of ‰‰〷‰n‰‰nc‰ status. Note The ‰‰〷‰n‰‰nc‰ Property will not be changed. 5. ‰‰ti‰n‰‰‰ Select an status and change its name if required.
  • Page 92 DS-K1T981 Series Access Control Terminal User Manual 2. Set the ‰‰〷‰n‰‰nc‰ Mode as Auto. Figure 7-16 Auto ‰‰〷‰n‰‰nc‰ Mode 3. Enable the ‰‰〷‰n‰‰nc‰ Status ‰‰ncti‰n‰ 4. Enable a group of ‰‰〷‰n‰‰nc‰ status. Note The ‰‰〷‰n‰‰nc‰ Property will not be changed.

  • Page 93: Set Manual And Auto ‰‰〷‰N‰‰Nc‰ Via Device

    DS-K1T981 Series Access Control Terminal User Manual Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's ‰‰‰‰‰ntic‰ti‰n from Monday 11:00 to 12:00 will be marked as break. 7.9.4 Set Manual and Auto ‰‰〷‰n‰‰nc‰ via Device Set the ‰‰〷‰n‰‰nc‰...

  • Page 94: System Maintenance

    DS-K1T981 Series Access Control Terminal User Manual 1) Tap ‰‰〷‰n‰‰nc‰ Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected ‰‰〷‰n‰‰nc‰ status's start tim‰ of the day. 4) Tap OK. 5) Repeat step 1 to 4 according to your actual needs.
  • Page 95 DS-K1T981 Series Access Control Terminal User Manual Figure 7-18 Maintenance Page System ‰n‰‰‰m‰ti‰n You can view the device ‰n‰‰‰m‰ti‰n‰ Note The page may vary according to ‰‰‰〶‰‰‰n‰ device models. Refers to the actual page for details. Capacity You can view the number of user, face picture, card, event, ‰〶n‰‰‰‰‰‰n‰ and iris.

  • Page 96: Video Intercom

    DS-K1T981 Series Access Control Terminal User Manual Upgrade Plug the USB ‰〶‰‰‰ drive in the device USB interface. Tap Upgrade → OK , and the device will read the digicap.dav ‰〶‰‰ in the USB ‰〶‰‰‰ drive to start upgrading. Liveview Mode You can select Visible Light or IR Light.

  • Page 97: Call Center From Device

    DS-K1T981 Series Access Control Terminal User Manual 6. Tap Answer on the pop-up page of the client ‰‰ftw‰‰‰ and you can start two-way audio between the device and the client ‰‰ftw‰‰‰‰ Note If the device is added to m‰‰ti‰‰‰ client ‰‰ftw‰‰‰‰ and when the device is calling the client ‰‰ftw‰‰‰‰...

  • Page 98: Call Room From Device

    DS-K1T981 Series Access Control Terminal User Manual Note For details about adding device, see Add Device. 5. Enter the Live View page and double-click the added device to start live view. Note For details about ‰‰‰‰‰ti‰n‰ in the Live View page, see Live View in the user manual of the client ‰‰ftw‰‰‰‰...

  • Page 99: Preference ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual 1) Tap on the device ‰n‰ti‰‰ page. 2) Tap to call the mobile client. 7.12 Preference ‰‰〷呠n‰‰ You can c‰n‰〶‰‰‰‰ preference ‰‰〷呠n‰‰ parameters. Steps 1. Tap Preference to enter the preference ‰‰〷呠n‰‰ page.
  • Page 100 DS-K1T981 Series Access Control Terminal User Manual Shortcut Key Choose the shortcut key that displayed on the ‰‰‰‰‰ntic‰ti‰n page, including the QR code ‰‰ncti‰n‰ the call ‰‰ncti‰n‰ call type, and the password entering ‰‰ncti‰n‰ Note You can select call type from Call Room, Call Center, Call ‰‰‰c‰‰〶‰‰ Room No. and Call APP.

  • Page 101: Chapter 8 ‰‰‰‰‰Ti‰N Via Web Browser

    DS-K1T981 Series Access Control Terminal User Manual Chapter 8 ‰‰‰‰‰ti‰n via Web Browser 8.1 Login You can login via the web browser. Note Make sure the device is ‰ctiv‰‰‰‰‰ Obtain the IP address from the device ‰ft‰‰ Wi-Fi is enabled. Make sure the IP segment of the device and the computer is the same.
  • Page 102 DS-K1T981 Series Access Control Terminal User Manual Figure 8-1 Live View Page ‰‰ncti‰n ‰‰‰c‰‰‰ti‰n‰‰ Select the image size when ‰‰‰‰tin‰ live view. Set the volume when ‰‰‰‰tin‰ live view. Note If you adjust the volume when ‰‰‰‰tin‰ two-way audio, you may hear a repeated sounds.

  • Page 103: Person Management

    DS-K1T981 Series Access Control Terminal User Manual Full screen view. 8.3 Person Management Click and add the person's ‰n‰‰‰m‰ti‰n‰ including the basic ‰n‰‰‰m‰ti‰n‰ ‰‰‰‰‰ntic‰ti‰n mode, card, ‰〶n‰‰‰‰‰‰n‰ and iris. And you can also edit user ‰n‰‰‰m‰ti‰n‰ view user picture and search user ‰n‰‰‰m‰ti‰n in the user list.

  • Page 104: Search Event

    DS-K1T981 Series Access Control Terminal User Manual Set Start Time and End Time. Click OK to save the ‰‰〷呠n‰‰‰ Set Access Control Click User → Add to enter the Add Person page. ‰ft‰‰ check Administrator in Access Control, the added person can log in by ‰‰‰‰‰ntic‰tin‰ face.

  • Page 105: N‰〶‰‰‰‰Ti‰N

    DS-K1T981 Series Access Control Terminal User Manual 8.5 C‰n‰〶‰‰‰‰ti‰n 8.5.1 Set Local Parameters Set the live view parameters, record ‰〶‰‰ size and saving path, and captured pictures and clip saving path. Set Live View Parameters Click C‰n‰〶‰‰‰‰ti‰n → Local to enter the Local page. ‰‰n‰〶‰‰‰‰ the stream type, the play performance, auto start live view, and the image format and click Save.

  • Page 106: Set Dst

    DS-K1T981 Series Access Control Terminal User Manual You should set the NTP server's IP address, port No., and interval. Manual By default, the device tim‰ should be synchronized manually. You can set the device tim‰ manually or check Sync. with Computer Time to synchronize the device tim‰ with the computer's tim‰‰...
  • Page 107 DS-K1T981 Series Access Control Terminal User Manual Figure 8-4 Upgrade and Maintenance Page Click Reboot to start reboot the device. Restore Parameters Click C‰n‰〶‰‰‰‰ti‰n → System → Maintenance → Upgrade & Maintenance . Restore All All parameters will be restored to the factory ‰‰〷呠n‰‰‰ You should ‰ctiv‰‰‰ the device before usage.

  • Page 108: Log Query

    DS-K1T981 Series Access Control Terminal User Manual Click Export to export the logs or device parameters. Note You can import the exported device parameters to another device. Import and select the ‰〶‰‰ to import. Click Import to start import c‰n‰〶‰‰‰‰ti‰n ‰〶‰‰‰...

  • Page 109: Ti‰〶C‰‰‰ Management

    DS-K1T981 Series Access Control Terminal User Manual Enable HTTP In order to increase the network security level when v‰‰‰tin‰ websites, you can enable HTTP to acquire a more secure and encrypted network c‰mm‰n‰c‰ti‰n environment. The c‰mm‰n‰c‰ti‰n should ‰‰‰‰‰ntic‰‰‰‰ by ‰‰‰nti‰y and ‰nc‰y‰ti‰n password ‰ft‰‰ enabling HTTP, which is save.

  • Page 110: Change Administrator's Password

    DS-K1T981 Series Access Control Terminal User Manual Install CA C‰‰ti‰〶c‰‰‰ Before You Start Prepare a CA c‰‰ti‰〶c‰‰‰ in advance. Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → System → Security → C‰‰ti‰〶c‰‰‰ Management . 2. Create an ID in the Inport CA C‰‰ti‰〶c‰‰‰ area.

  • Page 111: Network ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual 8.5.12 Network ‰‰〷呠n‰‰ Set TCP/IP, port, Wi-Fi parameters, report strategy, ‰‰‰tf‰‰m access and HTTP listening. Note Some device models do not support Wi-Fi ‰‰〷呠n‰‰‰ Refer to the actual products when c‰n‰〶‰‰‰‰ti‰n‰ Set Basic Network Parameters...
  • Page 112 DS-K1T981 Series Access Control Terminal User Manual Figure 8-5 TCP/IP ‰‰〷呠n‰‰ Page Set the parameters and click Save to save the ‰‰〷呠n‰‰‰...
  • Page 113 DS-K1T981 Series Access Control Terminal User Manual DHCP If uncheck the ‰‰ncti‰n‰ you should set the IPv4 address, IPv4 subnet mask and IPv4 default gateway. If you check the ‰‰ncti‰n‰ the system will allocate the IPv4 address, IPv4 subnet mask and the IPv4 default gateway ‰‰‰‰m‰tic‰‰‰y‰...
  • Page 114 DS-K1T981 Series Access Control Terminal User Manual Figure 8-6 Wi-Fi ‰‰〷呠n‰‰ Page 2. Check Wi-Fi. 3. Select a Wi-Fi - Click of a Wi-Fi in the list and enter the Wi-Fi password. - Click Add and enter a Wi-Fi's name, password, and ‰nc‰y‰ti‰n type. Click Connect. When the Wi-Fi is connected, click OK.
  • Page 115 DS-K1T981 Series Access Control Terminal User Manual 1. Click C‰n‰〶‰‰‰‰ti‰n → Network → Advanced ‰‰〷呠n‰‰ → ‰‰‰tf‰‰m . 2. Select ISUP from the ‰‰‰tf‰‰m access mode drop-down list. 3. Check Enable. 4. Set the ISUP version, server address, device ID, and the ISUP status.

  • Page 116: Set Video And Audio Parameters

    DS-K1T981 Series Access Control Terminal User Manual 2. Edit the ‰‰‰tin‰ti‰n IP or host name, URL and port. 3. ‰‰ti‰n‰‰‰ Click Test to test whether the entered IP address or host name are valid. 4. ‰‰ti‰n‰‰‰ Click Default to reset the ‰‰‰tin‰ti‰n IP or host name.
  • Page 117 DS-K1T981 Series Access Control Terminal User Manual Figure 8-7 Video ‰‰〷呠n‰‰ Page Set the video channel, the stream type, the video type, ‰‰‰‰‰‰ti‰n‰ the bitrate type, video quality, the frame rate, the Max. bitrate, the video encoding, and I frame interval.

  • Page 118: Customize Audio Content

    DS-K1T981 Series Access Control Terminal User Manual Figure 8-8 Set Audio Parameters Drag the block to adjust the device input and output volume. Click Save to save the ‰‰〷呠n‰‰ ‰ft‰‰ the c‰n‰〶‰‰‰‰ti‰n‰ You can also enable Voice Prompt. Note The ‰‰ncti‰n‰ vary according to ‰‰‰〶‰‰‰n‰ models. Refers to the actual device for details.

  • Page 119: Set Image Parameters

    DS-K1T981 Series Access Control Terminal User Manual 7. Set the tim‰ period when ‰‰‰‰‰ntic‰ti‰n succeeded. 1) Click Add. 2) Set the tim‰ ‰‰‰‰ti‰n and the language. Note If ‰‰‰‰‰ntic‰ti‰n is succeeded in the c‰n‰〶‰‰‰‰‰ tim‰ ‰‰‰‰ti‰n‰ the device will broadcast the c‰n‰〶‰‰‰‰‰...

  • Page 120: Set Supplement Light Brightness

    DS-K1T981 Series Access Control Terminal User Manual Enable or disable the WDR ‰‰ncti‰n‰ When there are both very bright and very dark areas simultaneously in the view, WDR balances the brightness level of the whole image and provide clear images with details.

  • Page 121: Time And ‰‰〷‰N‰‰Nc‰ ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual 8.5.17 Time and ‰‰〷‰n‰‰nc‰ ‰‰〷呠n‰‰ If you want to track and monitor when the persons start/stop work and monitor their working hours and late arrivals, early departures, tim‰ taken on breaks, and absenteeism, you can add the person to the ‰‰‰ft group and assign a ‰‰‰ft schedule (a rule for the ‰‰〷‰n‰‰nc‰...
  • Page 122 DS-K1T981 Series Access Control Terminal User Manual Steps 1. Click C‰n‰〶‰‰‰‰ti‰n → ‰‰〷‰n‰‰nc‰ to enter the ‰‰〷呠n‰‰ page. 2. Set the ‰‰〷‰n‰‰nc‰ Mode as Manual. 3. Enable the ‰‰〷‰n‰‰nc‰ Status Required and set the ‰‰〷‰n‰‰c‰ status lasts ‰‰‰‰ti‰n‰ 4. Enable a group of ‰‰〷‰n‰‰nc‰ status.

  • Page 123: General ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual Before You Start Add at least one user, and set the user's ‰‰‰‰‰ntic‰ti‰n mode. For details, see User Management. Steps 1. Click C‰n‰〶‰‰‰‰ti‰n → ‰‰〷‰n‰‰nc‰ to enter the ‰‰〷呠n‰‰ page. 2. Set the ‰‰〷‰n‰‰nc‰ Mode as Manual and Auto.
  • Page 124 DS-K1T981 Series Access Control Terminal User Manual Card Reader Type/Card Reader ‰‰‰c‰‰‰ti‰n Get card reader type and ‰‰‰c‰‰‰ti‰n‰ They are read-only. Enable Card Reader Enable the card reader's ‰‰ncti‰n‰ ‰‰‰‰‰ntic‰ti‰n Select an ‰‰‰‰‰ntic‰ti‰n mode according to your actual needs from the drop-down list.
  • Page 125 DS-K1T981 Series Access Control Terminal User Manual Max. ‰‰‰‰‰ntic‰ti‰n Failed ‰‰〷‰m‰‰‰ Enable to report alarm when the card reading ‰‰〷‰m‰‰‰ reach the set value. C‰mm‰n‰c‰ti‰n with Controller Every When the access control device cannot connect with the card reader for longer than the set tim‰‰...
  • Page 126 DS-K1T981 Series Access Control Terminal User Manual Picture Uploading and Storage Upload Captured Picture When ‰‰‰‰‰ntic‰tin‰ Upload the pictures captured when ‰‰‰‰‰ntic‰tin‰ to the ‰‰‰tf‰‰m ‰‰‰‰m‰tic‰‰‰y‰ Save Captured Picture When ‰‰‰‰‰ntic‰tin‰ If you enable this ‰‰ncti‰n‰ you can save the picture when ‰‰‰‰‰ntic‰tin‰ to the device.
  • Page 127 DS-K1T981 Series Access Control Terminal User Manual Click Save to save the ‰‰〷呠n‰‰ ‰ft‰‰ the c‰n‰〶‰‰‰‰ti‰n‰ Set Card Security Click C‰n‰〶‰‰‰‰ti‰n → General → Card Security to enter the ‰‰〷呠n‰‰ page. Set the parameters and click Save. Enable NFC Card In order to prevent the mobile phone from ‰‰〷呠n‰...

  • Page 128: Video Intercom ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual Wiegand 26 (3 bytes) The device will read card via Wiegand 26 protocol (read 3 bytes). Wiegand 34 (4 bytes) The device will read card via Wiegand 34 protocol (read 4 bytes). C‰n‰〶‰‰‰‰ ‰‰‰‰‰ntic‰ti‰n Result Text Steps 1.
  • Page 129 DS-K1T981 Series Access Control Terminal User Manual Figure 8-10 Device No. ‰‰〷呠n‰‰ Device Type The device can be used as a door ‰‰‰ti‰n or outer door ‰‰‰ti‰n‰ Select a device type from the drop-down list. Note If you change the device type, you should reboot the device.
  • Page 130 DS-K1T981 Series Access Control Terminal User Manual Note If you change the No., you should reboot the device. ● The main door ‰‰‰ti‰n No. is 0, and the sub door ‰‰‰ti‰n No. ranges from 1 to 16. ● Phase No.

  • Page 131: Access Control ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual Press B‰‰〷‰n to Call Steps 1. Click Intercom → Press B‰‰〷‰n to Call to enter the ‰‰〷呠n‰‰ page. 2. Set the parameters. - Check Call Management Center，‰‰‰c‰‰〶‰‰ Indoor ‰‰‰ti‰n，Indoor ‰‰‰ti‰n or APP to set the b‰‰〷‰n‰...
  • Page 132 DS-K1T981 Series Access Control Terminal User Manual Figure 8-11 Door Parameters ‰‰〷呠n‰‰ Page Click Save to save the ‰‰〷呠n‰‰ ‰ft‰‰ the c‰n‰〶‰‰‰‰ti‰n‰ Door No. Select the device corresponded door No. Name You can create a name for the door. Open ‰‰‰‰ti‰n Set the door unlocking ‰‰‰‰ti‰n‰...
  • Page 133 DS-K1T981 Series Access Control Terminal User Manual An alarm will be triggered if the door has not been closed within the c‰n‰〶‰‰‰‰‰ tim‰ ‰‰‰‰ti‰n‰ Door Contact You can set the door contact as Remain Open or Remain Closed according to your actual needs.
  • Page 134 DS-K1T981 Series Access Control Terminal User Manual Figure 8-12 RS-485 Page Check Enable RS-485, and set the parameters. Click Save to save the ‰‰〷呠n‰‰ ‰ft‰‰ the c‰n‰〶‰‰‰‰ti‰n‰ Set the RS-485 No. Peripheral Type...
  • Page 135 DS-K1T981 Series Access Control Terminal User Manual Select a peripheral from the drop-down list according the actual ‰‰‰‰‰ti‰n‰ You can select from Card Reader, Extension Module, Access Controller, or Disable. Note ‰ft‰‰ the peripheral is changed and saved, the device will reboot ‰‰‰‰m‰tic‰‰‰y‰...

  • Page 136: Iris ‰‰〷呠N

    DS-K1T981 Series Access Control Terminal User Manual Figure 8-13 Wiegand Page 2. Check Wiegand to enable the Wiegand ‰‰ncti‰n‰ 3. Set a transmission ‰‰‰‰cti‰n‰ Input The device can connect a Wiegand card reader. Output The can connect an external access controller. And the two devices will transmit the card No.
  • Page 137 DS-K1T981 Series Access Control Terminal User Manual Note Biometric ‰‰c‰‰n‰ti‰n products are not 100% applicable to ‰nti‰‰‰‰‰‰〶n‰ environments. If you require a higher security level, use m‰‰ti‰‰‰ ‰‰‰‰‰ntic‰ti‰n modes. Enable Iris Liveness ‰‰‰‰cti‰n Enable or disable the live iris ‰‰‰‰cti‰n ‰‰ncti‰n‰ If enabling the ‰‰ncti‰n‰ the device can recognize whether the iris is a live one or not.

  • Page 138: Set Biometric Parameters

    DS-K1T981 Series Access Control Terminal User Manual Auto ‰‰c‰‰n‰ti‰n mode allows you to ‰‰‰‰‰ntic‰‰‰ ‰‰‰‰m‰tic‰‰‰y‰ 5. Click Save to save the ‰‰〷呠n‰‰ ‰ft‰‰ the c‰n‰〶‰‰‰‰ti‰n‰ 8.5.22 Set Biometric Parameters Set Basic Parameters Click C‰n‰〶‰‰‰‰ti‰n → Smart → Smart . Note...
  • Page 139 DS-K1T981 Series Access Control Terminal User Manual Figure 8-14 Smart ‰‰〷呠n‰‰ Page...
  • Page 140 DS-K1T981 Series Access Control Terminal User Manual Click Save to save the ‰‰〷呠n‰‰ ‰ft‰‰ the c‰n‰〶‰‰‰‰ti‰n‰ Face ‰nti‰‰‰‰‰‰〶n‰ Enable or disable the live face ‰‰‰‰cti‰n ‰‰ncti‰n‰ If enabling the ‰‰ncti‰n‰ the device can recognize whether the person is a live one or not.
  • Page 141 DS-K1T981 Series Access Control Terminal User Manual Face Grading Set the face grading according to your needs. 1:1 Matching Threshold Set the matching threshold when ‰‰‰‰‰ntic‰tin‰ via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false ‰‰‰‰cti‰n rate.

  • Page 142: Set Theme

    DS-K1T981 Series Access Control Terminal User Manual None The device will detect the face with mask without prompt. Reminder of Wearing If the person do not wear a face mask when ‰‰‰‰‰ntic‰tin‰‰ the device prompts a n‰ti‰〶c‰ti‰n and the door will open.
  • Page 143 DS-K1T981 Series Access Control Terminal User Manual Enable Sleep and the device will enter the sleep mode when no ‰‰‰‰‰ti‰n within the c‰n‰〶‰‰‰‰‰ sleep tim‰‰ Theme Management You can click + in the frame and upload the screen saver pictures from the local PC.

  • Page 144: Chapter 9 Client ‰‰‰〶W‰‰‰ C‰N‰〶‰‰‰‰Ti‰N

    DS-K1T981 Series Access Control Terminal User Manual Chapter 9 Client ‰‰‰〶w‰‰‰ C‰n‰〶‰‰‰‰ti‰n 9.1 C‰n‰〶‰‰‰‰ti‰n Flow of Client ‰‰‰〶w‰‰‰ Follow the ‰〶‰w diagram below to c‰n‰〶‰‰‰‰ on the client ‰‰ftw‰‰‰‰ Figure 9-1 Flow Diagram of C‰n‰〶‰‰‰‰ti‰n on Client ‰‰‰〶w‰‰‰ 9.2 Device Management...

  • Page 145: Add Device

    DS-K1T981 Series Access Control Terminal User Manual Example You can control entrance & exit and manage ‰‰〷‰n‰‰nc‰ ‰ft‰‰ adding access control devices to the client; you can perform video intercom with the indoor ‰‰‰ti‰n‰ and door ‰‰‰ti‰n‰‰ 9.2.1 Add Device The client provides three device adding modes including by IP/domain, IP segment, and ISUP protocol.
  • Page 146 DS-K1T981 Series Access Control Terminal User Manual you change your password regularly, especially in the high security system, changing the password monthly or weekly can b‰‰〷‰‰ protect your product. Proper c‰n‰〶‰‰‰‰ti‰n of all passwords and other security ‰‰〷呠n‰‰ is the responsibility of the installer and/or end-user.

  • Page 147: Reset Device Password

    DS-K1T981 Series Access Control Terminal User Manual Address Edit the address of the device. Port Enter the device port number. The default port number is 8000. User Name Enter the device user name. By default, the user name is admin.

  • Page 148: Manage Added Devices

    DS-K1T981 Series Access Control Terminal User Manual Note For the following ‰‰‰‰‰ti‰n‰ for ‰‰‰‰〷呠n‰ the password, contact our technical support. C‰‰ti‰n The password strength of the device can be ‰‰‰‰m‰tic‰‰‰y checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case ‰‰‰〷‰‰‰‰...

  • Page 149: Group Management

    DS-K1T981 Series Access Control Terminal User Manual Upgrade Device View device status in the Firmware Upgrade column, check one or more upgradable devices, and click Upgrade Device Firmware to upgrade the selected devices. For details, refer to . Get Events from Device Check one device, and click Get Events from Device to synchronize events.

  • Page 150: Person Management

    DS-K1T981 Series Access Control Terminal User Manual Steps 1. Enter the Device Management module. 2. Click Device Management → Group to enter the group management page. 3. Select a group from the group list and select the resource type as Access Point, Alarm Input, Alarm Output, etc.

  • Page 151: Import And Export Person ‰‰‰Nti‰Y ‰N‰‰‰M‰Ti‰N

    DS-K1T981 Series Access Control Terminal User Manual Show Persons in Check Show Persons in Sub ‰‰‰‰n‰‰‰ti‰n and select an ‰‰‰‰n‰‰‰ti‰n to Sub ‰‰‰‰n‰‰‰ti‰n show persons in its sub ‰‰‰‰n‰‰‰ti‰n‰‰ 9.4.2 Import and Export Person ‰‰‰nti‰y ‰n‰‰‰m‰ti‰n You can import the ‰n‰‰‰m‰ti‰n and pictures of m‰‰ti‰‰‰ persons to the client ‰‰ftw‰‰‰ in a batch.
  • Page 152 DS-K1T981 Series Access Control Terminal User Manual Steps 1. Enter the Person module. 2. Select an added ‰‰‰‰n‰‰‰ti‰n in the list, or click Add in the ‰‰‰‰‰‰‰‰ft corner to add an ‰‰‰‰n‰‰‰ti‰n and then select it. 3. Click Import to open the Import panel and check Face.

  • Page 153: Get Person ‰N‰‰‰M‰Ti‰N From Access Control Device

    DS-K1T981 Series Access Control Terminal User Manual Steps 1. Enter the Person module. 2. ‰‰ti‰n‰‰‰ Select an ‰‰‰‰n‰‰‰ti‰n in the list. Note All persons' face pictures will be exported if you do not select any ‰‰‰‰n‰‰‰ti‰n‰ 3. Click Export to open the Export panel and check Face as the content to export.

  • Page 154: Issue Cards To Persons In Batch

    DS-K1T981 Series Access Control Terminal User Manual Note Up to 2,000 persons and 5,000 cards can be imported. The person ‰n‰‰‰m‰ti‰n‰ including person details, person's ‰〶n‰‰‰‰‰‰n‰ ‰n‰‰‰m‰ti‰n (if c‰n‰〶‰‰‰‰‰)‰ and the linked cards (if c‰n‰〶‰‰‰‰‰)‰ will be imported to the selected ‰‰‰‰n‰‰‰ti‰n‰...

  • Page 155: Set Card Issuing Parameters

    DS-K1T981 Series Access Control Terminal User Manual 9.4.6 Set Card Issuing Parameters The client provides two modes for reading a card's number: via card enrollment ‰‰‰ti‰n or via the card reader of the access control device. If a card enrollment ‰‰‰ti‰n is available, connect it to the PC running the client by USB interface or COM, and place the card on the card enrollment to read the card number.

  • Page 156: N‰〶‰‰‰‰ Schedule And Template

    DS-K1T981 Series Access Control Terminal User Manual 9.5 C‰n‰〶‰‰‰‰ Schedule and Template You can c‰n‰〶‰‰‰‰ the template including holiday and week schedule. ‰ft‰‰ ‰‰〷呠n‰ the template, you can adopt the c‰n‰〶‰‰‰‰‰ template to access groups when ‰‰〷呠n‰ the access groups, so that the access group will take ‰‰〶‰c‰...

  • Page 157: Add Template

    DS-K1T981 Series Access Control Terminal User Manual 6) ‰‰ti‰n‰‰‰ Click in the ‰‰‰‰‰ti‰n column to delete this added holiday period from the holiday list. 6. Click Save. 9.5.2 Add Template Template includes week schedule and holiday. You can set week schedule and assign the tim‰...

  • Page 158: Set Access Group To Assign Access ‰‰‰‰‰‰‰‰‰Ti‰N To Persons

    DS-K1T981 Series Access Control Terminal User Manual Note Up to 4 holidays can be added to one template. 1) Click Holiday tab. 2) Select a holiday in the ‰‰ft list and it will be added to the selected list on the right panel.
  • Page 159 DS-K1T981 Series Access Control Terminal User Manual 7. Click Save. You can view the selected person(s) and the selected access point(s) on the right side of the interface. Figure 9-2 Display the Selected Person(s) and Access Point(s) 8. ‰ft‰‰ adding the access groups, you need to apply them to the access control device to take ‰‰〶‰c‰‰...

  • Page 160: N‰〶‰‰‰‰ Advanced ‰‰Ncti‰N

    DS-K1T981 Series Access Control Terminal User Manual The selected persons in the applied access groups will have the ‰‰‰‰‰‰‰‰‰ti‰n to enter/exit the selected doors/door ‰‰‰ti‰n‰ with their linked card(s) or ‰〶n‰‰‰‰‰‰n‰‰‰ 9. ‰‰ti‰n‰‰‰ Click to edit the access group if necessary.
  • Page 161 DS-K1T981 Series Access Control Terminal User Manual C‰n‰〶‰‰‰‰ Parameters for Access Control Device ‰ft‰‰ adding the access control device, you can c‰n‰〶‰‰‰‰ its parameters, including overlaying user ‰n‰‰‰m‰ti‰n on picture, uploading pictures ‰ft‰‰ capturing, saving captured pictures, etc. Before You Start Add access control device to the client.
  • Page 162 DS-K1T981 Series Access Control Terminal User Manual Press Key to Enter Card Number If you enable this ‰‰ncti‰n‰ you can input the card No. by pressing the key. Wi-Fi Probe If you enable this ‰‰ncti‰n‰ the device can probe the surrounding c‰mm‰n‰c‰ti‰n devices' MAC address and upload the MAC address to the system.
  • Page 163 DS-K1T981 Series Access Control Terminal User Manual Door Locked Time ‰ft‰‰ swiping the normal card and relay ‰cti‰n‰ the tim‰‰ for locking the door starts working. Extended Open ‰‰‰‰ti‰n The door contact can be enabled with appropriate delay ‰ft‰‰ person with extended accesss needs swipes her/his card.
  • Page 164 DS-K1T981 Series Access Control Terminal User Manual Steps 1. Click Access Control → Advanced F‰ncti‰n → Device Parameter . 2. In the device list on the ‰‰ft‰ click to expand the door, select a card reader and you can edit the card reader's parameters on the right.
  • Page 165 DS-K1T981 Series Access Control Terminal User Manual Select the ‰〶n‰‰‰‰‰‰n‰ ‰‰c‰‰n‰ti‰n level in the drop-down list. Default Card Reader ‰‰‰‰‰ntic‰ti‰n Mode View the default card reader ‰‰‰‰‰ntic‰ti‰n mode. Fingerprint Capacity View the maximum number of available ‰〶n‰‰‰‰‰‰n‰‰‰ ‰x‰‰tin‰ Fingerprint Number View the number of existed ‰〶n‰‰‰‰‰‰n‰‰...
  • Page 166 DS-K1T981 Series Access Control Terminal User Manual user cannot ‰‰‰‰‰ntic‰‰‰ via the fake face within 5 minutes. Within the 5 minutes, the user can ‰‰‰‰‰ntic‰‰‰ via the real face twice c‰ntin‰‰‰‰‰y to unlock. ‰‰‰‰‰c‰ti‰n Mode You can select indoor or others ‰‰‰‰‰c‰ti‰n modes according to actual environment.

  • Page 167: N‰〶‰‰‰‰ Other Parameters

    DS-K1T981 Series Access Control Terminal User Manual Passing Mode Select the controller which will control the barrier status of the device. If you select According to Lane Controller's DIP ‰‰〷呠n‰‰, the device will follow the lane ● controller's DIP ‰‰〷呠n‰‰ to control the barrier. The ‰‰〷呠n‰‰ on the ‰‰ftw‰‰‰ will be invalid.
  • Page 168 DS-K1T981 Series Access Control Terminal User Manual 1. Enter the Access Control module. 2. On the n‰v‰‰‰ti‰n bar on the ‰‰ft‰ enter Advanced F‰ncti‰n → More Parameters . 3. Select an access control device in the device list and click Face ‰‰c‰‰n‰ti‰n Terminal.
  • Page 169 DS-K1T981 Series Access Control Terminal User Manual 4. Select the serial port number from the drop-down list to set the RS-485 parameters. 5. Set the baud rate, data bit, the stop bit, parity type, c‰mm‰n‰c‰ti‰n mode, working mode, and c‰nn‰cti‰n mode in the drop-down list.

  • Page 170: Door/Elevator Control

    DS-K1T981 Series Access Control Terminal User Manual Steps Note The ‰‰ncti‰n should be supported by the access control device and the card reader. 1. Enter the Access Control module. 2. On the n‰v‰‰‰ti‰n bar on the ‰‰ft‰ enter Advanced F‰ncti‰n → More Parameters .
  • Page 171 DS-K1T981 Series Access Control Terminal User Manual Note For managing the access point group, refer to Group Management . The doors in the selected access control group will display. 3. Click a door icon to select a door, or press Ctrl and select m‰‰ti‰‰‰ doors.

  • Page 172: Check Real-Time Access Records

    DS-K1T981 Series Access Control Terminal User Manual 9.8.2 Check Real-Time Access Records The ‰‰‰‰‰tim‰ access records can be displayed in the client, including card swiping records, face ‰‰c‰‰n‰ti‰n records, skin-surface temperature ‰n‰‰‰m‰ti‰n‰ etc. Also, you can view the person ‰n‰‰‰m‰ti‰n and view the picture captured during access.
  • Page 173 DS-K1T981 Series Access Control Terminal User Manual Note In Linked Capture Picture ‰〶‰‰‰‰ you can double click the captured picture to view an enlarged picture. 7. ‰‰ti‰n‰‰‰ Click to view details (including person's detailed ‰n‰‰‰m‰ti‰n and the captured picture). Note In the pop-up window, you can click to view details in full screen.

  • Page 174: Appendix A. Tips For Scanning Fingerprint

    DS-K1T981 Series Access Control Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger ‰‰‰‰‰〶n‰‰‰‰ middle ‰〶n‰‰‰ or the third ‰〶n‰‰‰‰ Correct Scanning The ‰〶‰‰‰‰ displayed below is the correct way to scan your ‰〶n‰‰‰‰ You should press your ‰〶n‰‰‰ on the scanner horizontally. The center of your scanned ‰〶n‰‰‰ should align with the scanner center.
  • Page 175 DS-K1T981 Series Access Control Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid c‰n‰‰ti‰n‰ and rain. When it is dry, the scanner may not recognize your ‰〶n‰‰‰‰‰‰n‰ successfully. You can blow your ‰〶n‰‰‰ and scan again.

  • Page 176: Appendix B. Tips When C‰‰‰‰Ctin‰‰C‰M‰‰‰‰N‰ Face Picture/Iris

    DS-K1T981 Series Access Control Terminal User Manual Appendix B. Tips When C‰‰‰‰ctin‰‰C‰m‰‰‰‰n‰ Face Picture/Iris The ‰‰‰‰ti‰n when c‰‰‰‰ctin‰ or comparing face picture is as below:...
  • Page 177 DS-K1T981 Series Access Control Terminal User Manual ‰‰‰‰ti‰n‰ When Collecng/Comparing Iris (‰n‰‰‰‰‰‰ti‰n Angle: 0 Degree)
  • Page 178 DS-K1T981 Series Access Control Terminal User Manual Note Remove your glasses when adding the iris. ● Make sure your eyes in frame when adding the iris. ● Keep your ‰‰‰‰ti‰n when adding the iris. ● When the ‰n‰‰‰‰‰‰ti‰n angle is 15°, the recommended ‰n‰‰‰‰‰‰ti‰n height for the device is 1.35 m.

  • Page 179: Appendix C. Tips For ‰N‰‰‰‰‰‰Ti‰N Environment

    DS-K1T981 Series Access Control Terminal User Manual Appendix C. Tips for ‰n‰‰‰‰‰‰ti‰n Environment 1. Light Source ‰‰‰‰m‰n‰ti‰n Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Avoid backlight, direct and indirect sunlight...

  • Page 180: Appendix D. Dimension

    DS-K1T981 Series Access Control Terminal User Manual Appendix D. Dimension Figure D-1 Dimension...

  • Page 181: Appendix E. C‰Mm‰N‰C‰Ti‰N Matrix And Device Command

    Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure E-2 Device Command...
  • Page 182 UD24933B-A...

This manual is also suitable for:

Ds-k1t981mDs-k1t981mfDs-kit673 seriesDs-kit673dxDs-kit673dwxDs-kit673tdx ... Show all

Table of Contents