TYAN TRINITY I7205 Manual page 29

3.4.4 – IDE Devices Sub -Menu
Feature
Primary/Secondary Master
Primary/Secondary Slave
Local Bus IDE
3.4.5 – I/O Device Configuration Sub-Menu
Feature
Serial Port A
Serial Port A Base I/O Address
Serial Port A Interrupt
Parallel Port
Parallel Port Mode
Parallel Port Base I/O Address
Parallel Port Interrupt
Parallel Port DMA Channel
Option
Auto
Auto - To determine the IDE drive type
User
by system BIOS
ATAPI Removable
User - To set IDE drive type by user
CD-ROM
ATAPI Removable - Read-and-write a
None
media (e.g., LS120, USB floppy, USB
Auto
ZIP)
User
CD-ROM - Readable CD -ROM drive
ATAPI Removable
CD-ROM
None
Both This setting determines whether the
ICH4 primary and secondary IDE
Primary
Secondary channels are activated.
Disable
Option
Enabled Enabled – To turn on the port
Disabled
It requires entering a base I/O address
Auto
and an interrupt number
Disabled – To turn off the port.
Auto – To let BIOS configure the port
automatically during POST
3F8
2F8
3E8
2E8
IRQ4
IRQ3
Enabled Enabled – To turn on the port
Disabled
It requires entering a base I/O address
Auto
and an interrupt number
Disabled – To turn off the port.
Auto – To let BIOS configure the port
automatically during POST
ECP
EPP
Bi-directional
Output Only
378
278
3BC
IRQ7
IRQ5
DMA3
DMA1
29
http://www.tyan.com
Description
Description