TYAN TRINITY I7205 Manual page 12

2.9 – ACPI Wake -up Jumper for USB Port-C, Port-D, Port-E and Port-F (J39)
2.10 – Front Panel Audio Connector (J71)
2.11 – Chassis Intrusion Connector (J72)
CLOSE Pins 1 and 2
Front panel USB devices' ACPI S1 wake up
CLOSE Pins 2 and 3 (Default)
Front panel USB devices' ACPI S1/S3/S4
wake up
Total current of all USB devices should not exceed the
standby current rating of the power supply
Signal
Description
MIC input
MIC power
Right line
output
NC
Left line
output
Pin-1
Intrusion cable detection (low asserted)
Pin-2
Intrusion detection (low asserted)
Pin-3
GND
12
http://www.tyan.com
pin-3
pin-3
Pin Pin Signal
# # Description
1 2 Analog GND
3 4 Analog VCC
Right line
5 6
return
7 8 Key
Left line
9 10
return