Installing The Memory - TYAN TRINITY I7205 Manual

2.17 – Installing the Memory
Before attempting to install any memory, make sure that the memory you have is compatible with
the motherboard as well as the processor.
modules can be used for FSB=400MHz Intel Pentium 4 processor but only DDR266 memory
modules can be used for FSB=533MHz Intel Pentium 4 processor. For important memory
information, please check Tyan's web site at:
Pentium 4 mPGA478 FSB=400MHz
Pentium 4 mPGA478 FSB=533MHz
Celeron mPGA478
Here are a few key points to note before installing memory modules onto your board.
All installed memory will be automatically detected - no need to set any jumpers
Supports 128MB, 256MB, 512MB and 1GB unbuffered DDR200/266 modules
Supports up to 4GB of memory
For example,
www.tyan.com
DDR200 (PC1600)
Yes
FSB=400MHz Yes
15
http://www.tyan.com
DDR200 and DDR266 memory
for recommendations.
DDR266 (PC2100)
Yes
No Yes
Yes
DDR Unbuffered Non-ECC
v
supported
DDR Unbuffered ECC
v
supported
DDR Registered ECC
X
unsupported