Usb Configuration Sub-Menu - TYAN TOMCAT K8SH Manual

Feature
Configure Remote Access type and parameters
Flow Control
Redirection After BIOS
POST
Terminal Type
VT-UTF8 Combo Key
Support
Sredir Memory Display
Delay
3.5.13 – USB Configuration Sub-Menu
You can use this screen to view the USB Configuration Menu. Use the up and down
arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change the
value of the selected option. The settings are described on the following pages.
Main Advanced
USB Configuration
Module Version – X.XX.X-XX.X
USB Devices Enabled:
None
Legacy USB Support
BIOS EHCI Hand-Off
Option
None Selects Flow Control for console
redirection.
Hardware
Software
Disable: Turns off the redirection
Disabled
after POST
Boot Loader:
Redirection is active during POST
and during Boot Loader.
Boot Loader
Always:
Redirection is always active.
Always <Some OSs may not work if set to
Always>
ANSI Selects the target terminal type.
VT100
VT-UTF8
Enables VT-UTF8 Combination
Disabled
key Support for ANSI/VT100
terminals.
Enabled
This file allows user to select the
No Delay
delay in seconds to display
memory information.
Delay 1 sec
Delay 2 sec
Delay 4 sec
BIOS Setup Utility
PCI/PnP Boot Security
[Enabled]
[Enabled]
48
http://www.tyan.com
Description
Chipset Exit
Enables USB host
controllers.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit