Ecc Configuration Sub-Menu - TYAN TOMCAT K8SH Manual

Feature
Memory Configuration
Memclock Mode
MCT Timing Mode
User Config Mode
Burst Length
SoftWare Memory Hole
HardWare Memory Hole
CPU1 Mem DQ Driver
Strength
CPU2 Mem DQ Driver
Strength
3.9.1.2 –ECC Configuration Sub-Menu
This menu allows the user to configure ECC setup for system & DRAM. Use the up
and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option.
Main Advanced
ECC Configuration
DRAM ECC Enable
MCA DRAM ECC Logging
ECC Chip Kill
DRAM SCRUB REDIRECT DRAM
BG Scrub
L2 Cache BG Scrub
Data Cache BG Scrub
Option
MEMCLK can be set by the code
Limit
using AUTO, or if you use LIMIT,
you can set one of the standard
Auto
values.
Manual Allows user to configure the MCT
Timing Mode manually.
Auto
Allows user to set the User Config
Manual
Mode manually.
Auto
Burst length can be set to 8 or 4
8 Beats
beats. 64 bit DQ must use 4 beats.
4 Beats
2 Beats
Allows user to enable software /
Disabled
hardware memory remapping
Enabled
around memory hole.
No Reduction This field controls the drive strength
reduction of the Memory DQ pins.
-15%
-30%
-50%
BIOS Setup Utility
PCI/PnP Boot Security
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
59
http://www.tyan.com
Description
Chipset Exit
DRAM ECC allows
hardware to report and
correct memory errors
automatically
maintaining system
integrity.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit