Connecting External Devices - TYAN TOMCAT K8SH Manual

Removal of a SO-DIMM card is a reversal of the installation procedure. Push out the
spring levers as shown and pull the card out of the socket.
The SO-DIMM expansion cards will fit in the slot only one way. Make sure that you align
the slot in the card with the key in the card slot.
Key slot
2.23 – Connecting External Devices
Connecting external devices to the motherboard is an easy task. The standard devices
you should expect to plug into the motherboard are keyboards, mice, and printer cables.
The following diagram will detail the ATX port stack for the following board:
29
http://www.tyan.com