Usb Configuration Sub-Menu - TYAN TOMCAT K8S Manual

Feature
Remote Access
Terminal Type
Serial Port Number
Serial Port Mode
Flow Control
Post-Boot Support
3.04.7 – USB Configuration Sub-Menu
You can use this screen to view the USB Configuration Menu. Use the up and down arrow ( / )
keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected
option. The settings are described on the following pages.
Main Advanced
USB Configuration
USB Devices Enabled :
Legacy USB Support
USB Beep Message
Feature
USB Devices Enabled
Legacy USB Support
USB Beep Message
Option
Disabled Enables remote access to system
through serial port
Serial
ANSI Sets the type of terminal used for
remote access
VT100
Determines which serial port will be
COM1
used for remote access
COM2
115200 8n1 Sets the speed of data to terminal
57600 8n1
19200 8n1
9600 8n1
Hardware Enables hardware flow control to
protect buffer overflow
None
Disabled Keeps redirection active after
booting to DOS
Enabled
BIOS Setup Utility
PCI/PnP Boot Security
[Auto]
[Disabled]
Option
USB Devices detected
Auto
Disabled
Enables support for legacy USB
Enabled devices such as keyboards, mice,
& bootable USB devices
Floppy
Hard Disk
Disabled Enables beep during USB Device
Enumeration
Enabled
38
http://www.TYAN.com
Description
Chipset Power Exit
Use [ENTER], [TAB] or
[SHIFT_TAB] to select
a field
Use [+] or [-] to
configure system time.
+/- Change Field
Tab Select Field
F1 Help
F10 Save and Exit
ESC Exit
Description