Primary/Secondary Ide Master/Slave Sub-Menu - TYAN TOMCAT K8SH Manual

3.5.2.1 – Primary/Secondary IDE Master/Slave Sub-Menu
Main Advanced
Primary IDE Master
Device: Not Detected
Type
LBA /Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T.
32 Bit Data Transfer
Feature
Configure Nat417 Super IO Chipset
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T.
32Bit Data Transfer
BIOS Setup Utility
PCI/PnP Boot Security
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
Option
Auto
Selects the type of device connected
Not Installed
to the system.
CD/DVD
ARMD
Auto: Enabled LBA Mode if the
Auto
device supports it and the device is
not already formatted with LBA
Mode disabled.
Disabled
Disabled: Disabled LBA Mode.
Disabled: The Data transfer from
Auto
and to the device occurs one sector
at a time.
Auto: The Data transfer from and to
Disabled the device occurs multiple sectors at
a time if the device supports it.
Selects the PIO Mode. Select Auto
Auto
to enhance hard disk performance
0~4
by optimizing the hard disk timing.
(at 1 interval)
Selects DMA Mode.
Auto
Auto: Auto detected.
S.M.A.R.T (Self-Monitoring Analysis
Auto
and Reporting Technology) is a
Disabled
utility that monitors your disk status
Enabled
to predict hard disk failure.
Enables 32-bit to maximize the IDE
Enabled
hard disk data transfer rate.
Disabled
38
http://www.tyan.com
Chipset Exit
← → Select Screen
↑↓ Select Item
+/- Change Option
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Description