Table of Contents
Advertisement
2.25 – Finishing Up
Congratulations on making it this far! You're finished setting up the hardware aspect of
your computer. Before closing up your chassis, make sure that all cables and wires are
connected properly, especially IDE cables and most importantly, jumpers. You may have
difficulty powering on your system if the motherboard jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find help by asking
your vendor for assistance. If they are not available for assistance, please find setup
information and documentation online at our website or by calling your vendor's
support line.
31
http://www.tyan.com
Advertisement
Table of Contents
