Dram Installation - TYAN TOMCAT IVS D Manual

3.10 DRAM Installation

The S1564 uses a 64-bit data path from memory to CPU and can
accommodate up to 512 MB of RAM. The mainboard supports
standard, EDO (Extended Data Out) and ECC(Error Correcting Code)
72 pin SIMMS . All installed memory will be automatically detected so
there is no need to set jumpers.
w SIMM modules must be installed in pairs.
w Each pair of SIMMs must be of the same size and type.
w The mainboard supports 1, 2, 4, 8 and 16MBx32 SIMMS.
w The table below shows some of the available memory configurations.
Bank0 Bank1 Bank2
1MB*2 (1MB*2) (1MB*2) (1MB*2)
1MB*2 (2MB*2) (2MB*2 (2MB*2)
1MB*2 (4MB*2) (4MB*2) 4MB*2)
1MB*2 (8MB*2) (8MB*2) (8MB*2)
1MB*2 (16MB*2) (16MB*2) (16MB*2) 2MB
1MB*2 (32MB*2) (32MB*2) (32MB*2) 2MB
1MB*2 (64MB*2) (64MB*2) (64MB*2) 2MB
2MB*2 (1MB*2) (1MB*2) 1MB*2)
2MB*2 (2MB*2) (2MB*2) (2MB*2)
2MB*2 (4MB*2) (4MB*2) (4MB*2)
2MB*2 (8MB*2) (8MB*2) (8MB*2)
2MB*2 (16MB*B (16MB*2) (16MB*2) 4MB
2MB*2 (32MB*2) (32MB*2) (32MB*2) 4MB
2MB*2 (64MB*2) (64MB*2) (64MB*2) 4MB
S1564-001-01 www.tyan.com
Total Memory In Bank
Bank3 0 0&1 0,1&2 Total
2MB 4MB
2MB 6MB
2MB 10MB
2MB 18MB
34MB
66MB 130MB 194MB
130MB 258MB 386MB
4MB 6MB
4MB 8MB
4MB 12MB
4MB 20MB
36MB
68MB 132MB 196MB
132MB 260MB 388MB
14
6MB 8MB
10MB 14MB
18MB 26MB
34MB 50MB
66MB 98MB
8MB 10MB
12MB 16MB
20MB 28MB
36MB 52MB
68MB 100MB