TYAN TOMCAT I7221A User Manual page 69

Tomcat i7221A S5151
6. Press the <Enter> key to create the specified volume and the following prompt will appear:
[
7. Confirm this selection by pressing the <Y> key after the prompt. The window will be
returned to the main menu with an updated status similar to the following:
RAID Volumes:
ID Name
0
Physical Disks:
Port Drive Model
0
3
The disk/volume information listed for your system can differ from the
following example.
In
Chapter 4: SATA/RAID Setup (for SATA RAID model)
Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
Name: RAID_Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 68.9 GB
Create Volume
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
Press "ENTER" to Create the specified volume.
]Change [TAB]-Next
Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
Level
RAID_Volume0 RAID0(Stripe)
Serial #
WDC WD360CD-00FN WD-WMAH91105870
WDC WD360CD-00FN WD-WMAH91063877
[ ]-Select
http://www.tyan.com
[ESC]-Previous Menu
Strip Size Status
128KB 68.9GB Normal
Size
34.4GB
34.4GB
[ESC]-Exit [ENTER]-Select Menu
Note
4-7
[ENTER]-Select
Bootable
Yes
Type/Status(Vol ID)
Member Disk (0)
Member Disk (0)