Power On Setup - TYAN TOMCAT I7221A User Manual

Tomcat i7221A S5151
When enabled, this option prevents chassis intrusion. Once you open the system casing, the
system marks the chassis as open. Even if you close the casing again, the system still
records the chassis as open. Only the system manufacturer can reset this.
Enabled / Disabled
Intruder# Detection
When set to Clear, this option will clear the intruder detection flag number and will auto set the
option to Keep when the system is rebooted.
Clear / Keep

3.7.1 Power On Setup

Soft-Off by PWR-BTTN
This determines how long the power button needs to be pressed to switch off the PC. Options
are:
Instant-Off / Delay 4 Sec.
PWRON After PWR-Fail
This option defines the state of the system when power fails and returns again. If On is
selected, the system automatically switches on when power is resumed. If Former-Sts is
selected, the system automatically switches on and restores itself to the state it was last in
when power failed.
Former-Sts / On / Off
Wake-Up by PCI Card
If enabled, this option awakens the system from a soft off state with an input signal from PME
on the PCI card.
Enabled / Disabled
USB KB Wake-Up From S3
If you have a USB keyboard, then you must enable this function to wake-up the system with a
key press.
Enabled / Disabled
This option is enabled only if S3 or S1 & S3 is selected from the ACPI
Suspend Type option.
Note
3-24
http://www.tyan.com
Chapter 3: BIOS Setup