TYAN TOMCAT H1000S Manual page 68

3.9.1.1 – Memory Configuration Sub-Menu
This menu has options for memory speed & latency. Use the up and down arrow ( / )
keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the
selected option.
Main Advanced
Memory Configuration
Memclock Mode
MCT Timing Mode
Bank Interleaving
Enable Clock to All Dimms
MemClk Tristate C3/ATLVID
Memory Hole Remapping
Feature
Memory Configuration
Memclock Mode
MCT Timing Mode
Bank Interleaving
Enable Clock to All Dimms
MemClk Tristate C3/ATLVID
Memory Hole Remapping
BIOS Setup Utility
PCI/PnP Boot
Exit
[Auto]
[Auto]
[Auto]
[Disabled]
[Disabled]
[Enabled]
Option
Select the DRAM Frequency
Limit
programming method. If Auto, the
DRAM speed will be based on SPDs.
If Limit, the DRAM speed will not
Auto
exceed the specified value. If
Manual, the DRAM speed specified
Manual
will be programmed by users.
Allows user to configure the MCT
Manual
Timing Mode manually.
Auto
Enable Bank Memory Interleaving
Disabled
Auto
Enable unused clocks to Dimms
Disabled
even memory
Enabled
populated.
Enable/Disable MemClk Tri-Stating
Disabled
during C3 and Alt VID
Enabled
Enable Memory Remapping around
Enabled
Memory Hole
Disabled
68
http://www.tyan.com
Security Chipset
MEMCLK can be set by
the code using AUTO, or
if you use LIMIT, you can
set one of the standard
values.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
slots are NOT