TYAN TOMCAT H1000S Manual page 49

3.5.8 – Hardware Health Configuration Sub-Menu
You can use this screen to view the Hardware Health Configuration Settings. Use the
up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option. The settings are described on the following pages.
Main Advanced
Hardware Health Configuration
H/W Health Function
FAN Select
FAN Power Control
Hardware Health Event Monitoring
Mainboard Voltages Report
CPU Temperature
VRM Temperature
System Temperature
FAN1 Speed
FAN2 Speed
FAN3 Speed
FAN4 Speed
FAN5 Speed
FAN6 Speed
FAN7 Speed
Feature Option
Hardware Health Configuration
Enabled
H/W Health Function
Disabled
4Pin FAN
FAN Select
3Pin FAN
Enabled
FAN Power Control
Disabled
BIOS Setup Utility
PCI/PnP Boot
Exit
[Enabled]
[4Pin FAN]
[Disabled]
:xx C/ xxx F
:xx C/ xxx F
:xx C/ xxx F
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
Description
Enables Hardware Health Monitoring Device.
Selects the FAN type.
FAN power duty cycle is auto dynamic
programmed in selected temperature range.
Disabled: Fan Power On.
Enabled: Fan Power Duty Cycle=30%(40˚C)-
100%(60˚C), see mainboard temp.
49
http://www.tyan.com
Security Chipset
Enables Hardware
Health Monitoring
Device.
← → Select Screen
↑↓ Select Item
+/- Change Option
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit