Power Management Setup - TYAN Titan Turbo S1573S ATX-2 Manual

Chapter 4

Power Management Setup

ROM PCI/ISA BIOS (2A59IT5A)
POWER MANGEMENT SETUP
Power Management
PM Control By APM
Video Off Method
Video Off After
MODEM Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
Throttle Duty Cycle
ZZ Active in Suspend
VGA Active Monitor
Soft-Off by PWR-BTTN
CPUFAN Off In Suspend
Resume by Ring
IRQ 8 Break Suspend
Power Management
This option allows you to select the level of power saving for the Doze,
Standby, and Suspend modes. Max Saving provides the most power
saved; Min Saving the least. User Define allows you to set each of the
modes individually.
PM Control by APM
If APM is installed on your system, selecting Yes gives better power
savings. This board supports APM.
Video Off Method
The Blank Screen option will let the system BIOS blank the screen
when disabling video. V/H SYNC+Blank will let the BIOS turn off the
V-SYNC and H-SYNC signals running from the VGA card to the
monitor.
AWARD SOFTWARE, INC.
: Disabled **Reload Global Timer Events**
: No IRQ [3-7, 9-15],NMI
: V/H SYNC+Blank Primary IDE 0
: Standby Primary IDE 1
: 3 Secondary IDE 0
: Disabled Secondary IDE 1
: Disabled Floppy Disk
: Disabled Serial Port
: Disabled Parallel Port
: 62.5% Power Interruption
: Disabled
: Enabled ESC : Quit
: Delay 4 sec. F1 : Help
: Enabled F5 : Old Values
: Disabled F6 : Load BIOS Defaults
: Disabled F7 : Load Setup Defaults
42
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
: Disabled
è ç êé : Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color