Advertisement

Pumps
Series: CTX, XP, XF, E
FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and
qualified on pool equipment in accordance with the latest applicable version of AS3633, along with any
other applicable local or council codes/standards. Before installing this product, read and follow all warning
notices and instructions that accompany this product. Failure to follow warning notices and instructions may
result in property damage, personal injury, or death. Improper installation and/or operation may void
the warranty.
Improper installation and/or operation can create unwanted electrical hazards which may cause serious
injury, property damage, or death.
ATTENTION INSTALLER – This manual contains important information about the installation,
operation and safe use of this product. This information should be given to the owner/operator
of this equipment.
Installation and Operation Manual
WARNING

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XP Series and is the answer not in the manual?

Questions and answers

Summarization of Contents

Pumps
Safety Warnings
Crucial safety information regarding installation and operation, including risks of injury or death.
Important Safety Instructions
Suction Entrapment and Water Velocity Hazards
Addresses severe risks from suction entrapment, drain cover standards, and maximum water velocity limits.
Installation Safety Standards & Fittings
Details standards for fittings, minimizing flow restriction, and pool cleaner suction fitting compliance.
Electrical and General Safety Precautions
Covers high-voltage motor, installation, trapped air, pressure testing, chemical spills, and dry operation risks.
General Information
Pump Features
Highlights key features like reinforced impeller, single-piece body, rapid priming diffuser, and continuous-duty motor.
Specifications and Performance
Details electrical specifications, flow rates, and performance curves for different pump series.
Technical Assistance
Provides contact information for support and the official website for further assistance.
Dimensions
Pump Series Dimensions
Illustrations and measurements for CTX, XP, XF, and E Series pumps, showing key dimensions and pipe clearances.
Getting Started
Package Contents
Lists the included items for each pump, such as union nuts, union tails, and o-rings.
Tools for Installation
Lists essential tools required for installing the pump, including safety equipment and measurement tools.
Installation
Pump Location Considerations
Guidelines for selecting an appropriate location, including height, drainage, ventilation, and accessibility.
Plumbing Guidelines and Pipe Sizing
Recommendations for pipe diameter based on pump model and distance to water, and plumbing best practices.
Pump Installation Requirements
Details on suction outlet connections, drain cover standards, and installing check valves or by-pass valves.
Water Connections and Piping
Guidance on connecting the pump to the system, including pipe length, unions, and water temperature limits.
Electrical Connections and Wiring
Covers voltage checks, 3-phase wiring requirements, and general electrical safety for pump installation.
Operation
Starting Up the Pump
Procedure for priming and starting the pump, including series-specific steps and safety checks.
Pump Lid Removal and Pressure Testing
Instructions for safely removing the pump lid and performing system pressure tests, including critical warnings.
Maintenance
Routine Maintenance Checks
Steps for regular inspection and cleaning of the pump's hair and lint basket and seals.
Winterizing the Pump
Procedure for protecting the pump during freezing temperatures and storing it safely.
Maintenance Recommendations
Advice on keeping the lint basket clean, using grease, ensuring airflow, and maintaining water chemical balance.
Pump Maintenance Schedule
A schedule for routine checks like cleaning the basket, checking for leaks, and inspecting for insects.
Troubleshooting
Common Pump Issues and Solutions
Diagnoses and solutions for common problems like noisy operation, no priming, and leaks.

Table of Contents