3
Intel
Characteristics
JT12
JT13
Jumper
Description
JT1
Dirty Cache LED Header
JT2
Drive Activity LED Header
JT3
Board-to-board connector for
Battery Backup Unit
JT4
Drive Fault LED Header
JT6
Internal SAS/SATA Port
Connector, Ports 0-3
JT7
Internal SAS/SATA Port
Connector, Ports 4-7
JT8
RAID Premium Feature Key
Header
JT9
Set Factory Defaults
Connector
JT10
Debug Connector
Intel® RAID Controller RT3WB080 Hardware User's Guide
®
RAID Controller RT3WB080
JT10
JT7
JT6
Port
Port
JT9
7-4
3-0
JT11
JT8
Table 1. Jumper Description
2-pin connector
2-pin connector
20-pin connector
2-pin connector
SFF8087
SFF8087
2-pin connector
2-pin connector
2-pin connector
Figure 4. Card Layout
Type
For connection to enclosure LED. When lit, it
indicates the data in the cache has not been
written to disk.
LED signal for drive activity.
Provides an interface to the daughter card that
contains the battery backup unit.
LED signal for any drive fault.
Connection to SAS/SATA devices.
Connection to SAS/SATA devices.
Enables support for RAID Premium Feature.
Resets the board settings to the defaults set in the
factory.
Reserved.
JT2
JT1
JT4
JT3
AF003198
Comments
13