Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vertiv Liebert MTP 120kVA
Summarization of Contents
Important Safety Instructions
1.1 EMC
Electromagnetic compatibility (EMC) requirements for UPS.
1.2 Installation Safety
Safety guidelines for UPS installation.
1.3 Maintenance Safety
Safety precautions for UPS maintenance.
1.4 Battery Handling & Disposal
Safe handling and disposal of used UPS batteries.
1.5 Connection Warnings
Critical warnings for UPS electrical connections.
UPS Installation
2.1 Initial Setup & Environment
Initial inspection, site requirements, and unpacking UPS.
2.4 Cabinet Moving & Fixing
Procedures for safely moving and securing the UPS cabinet.
2.6 UPS Exterior & Mechanical Data
Details on UPS exterior features and physical dimensions.
2.7 Internal Components & Wiring
Overview of internal UPS components and wiring terminal blocks.
2.8 Control Panel Overview
Description of UPS control panel, LCD display, LEDs, and keys.
2.10 Power Cable Specifications
Specifications for AC input/output and DC input power cables.
2.11 Wiring Procedures
Step-by-step guide for wiring the UPS system and components.
2.12 Backfeed Protection
Information on UPS backfeed protection mechanisms.
UPS Operation Modes & Procedures
3.1 UPS Block Diagram
Wiring diagrams illustrating UPS operational flow.
3.2 UPS Operating Modes
Detailed explanation of UPS operating modes (Standby, Line, Battery, Bypass, ECO, Shutdown, Maintenance Bypass).
3.3 UPS Startup & Shutdown
Step-by-step guides for starting and turning off the UPS.
Control Panel & Display
4.1 Introduction
Overview of the UPS control panel and its main functions.
4.2 UPS Display Screens
Detailed descriptions of various UPS display screens.
4.3 UPS Alarm List
Comprehensive list of UPS fault and warning messages.
4.4 History Record
Log of important setting changes and UPS mode changes.
UPS Interface & Communication
5.1 Dry Contact Ports
Details on remote EPO and battery temp detection via dry contacts.
5.2 Local Communication Ports (RS232/USB)
Connecting the UPS to a PC using RS232 or USB ports.
5.3 SNMP Slot
Description of the SNMP slot for network management cards.
5.4 Extra Communication Card
Overview of the extra communication card's features and interfaces.
UPS Service Procedures
7.1 Power Module Replacement
Step-by-step guide for replacing a UPS power module.
7.2 Air Filter Maintenance
Procedures for cleaning or replacing the UPS air filter.
7.3 Internal Parts Serviceability
Guidelines for servicing internal UPS components.
7.4 Transfer to Maintain Bypass Mode
Procedures for transferring the UPS to maintenance bypass mode.
UPS Technical Specifications
8.1 Conformity & Standards
UPS compliance with European and international safety and EMC standards.
8.2 Environmental Requirements
Specifies environmental conditions for UPS operation and storage.
8.3 Mechanical Specifications
Details on UPS dimensions, weight, and color.
8.4 Electrical Characteristics (Input & Output)
Electrical specifications for UPS AC input, DC circuit, and inverter output.
Parallel UPS System Installation
9.1 Parallel System Wiring
Procedures for input and output wiring in parallel UPS systems.
9.2 Parallel Board & Module Configuration
Settings for parallel boards and power modules in a UPS system.
9.3 Parallel Function Setup
Configuration steps for enabling parallel UPS functionality.
9.4 Parallel Cable Connection
Instructions for connecting parallel UPS system cables.
9.5 Parallel System Startup
Procedure for turning on a parallel UPS system.
Appendix A: Support & Contacts
A.1 US Technical Support
Contact information for Vertiv technical support in the United States.
A.2 Vertiv Office Locations
List of Vertiv headquarters and regional office locations.
Need help?
Do you have a question about the Liebert MTP 120kVA and is the answer not in the manual?
Questions and answers