Vertiv Liebert MTP 200kVA Installer/User Manual
  1. Manuals
  2. Brands
  3. Vertiv Manuals
  4. UPS
  5. Liebert MTP 200kVA
  6. Installer/user manual
Vertiv Liebert MTP 200kVA Installer/User Manual

Vertiv Liebert MTP 200kVA Installer/User Manual

Online ups
Hide thumbs
Table of Contents

Advertisement

Quick Links

Liebert® MTP Online UPS
Installer/User Guide
60kVA/100kVA/120kVA/160kVA/200kVA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Liebert MTP 200kVA and is the answer not in the manual?

Questions and answers

Related Manuals for Vertiv Liebert MTP 200kVA

Summary of Contents for Vertiv Liebert MTP 200kVA

  • Page 1 Liebert® MTP Online UPS Installer/User Guide 60kVA/100kVA/120kVA/160kVA/200kVA...
  • Page 2 The products covered by this instruction manual are manufactured and/or sold by Vertiv. This document is the property of Vertiv and contains confidential and proprietary information owned by Vertiv. Any copying, use, or disclosure of it without the written permission of Vertiv is strictly prohibited.

  • Page 3: Table Of Contents

    2.11 Wiring 2.11.1 Installation drawing 2.11.2 AC source connection 2.11.3 External battery cabinet connection 2.12 Backfeed Protection 3 Operation Mode and UPS Operation 3.1 Block Diagram of UPS 3.2 Operation Mode 3.2.1 Standby mode Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 4 5.2 Local communication ports RS232 and USB 5.3 SNMP slot 5.4 Extra comm 5.4.1 Product outlook 5.4.2 Product introduction 6 Troubleshooting 7 Service 7.1 Replacing the Power Module 7.2 Procedures of Clean Air Filter Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 5 7.3 Serviceability of Internal Parts 7.4 Transfer the UPS to Maintain Bypass Mode 7.4.1 Vertiv™ Liebert® MTP 60kVA mode transfer to Maintain Bypass mode 7.4.2 Vertiv™ Liebert® MTP 120kVA mode transfer to Maintain Bypass mode 7.4.3 Vertiv™ Liebert® MTP 200kVA mode transfer to Maintain Bypass mode 8 Specifications 8.1 Conformity and Standards...
  • Page 6 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA This page intentionally left blank Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 7: Important Safety Instructions

    160kVA 200kVA Current (A) • The short circuit capacity of the upstream protective devices must be equal to or larger than the capacity of the UPS’s input protective devices. 1 Important Safety Instructions Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 8: Maintenance

    WARNING! Risk of electrical shock and hazardous voltage. Can cause damage to the equipment, injury or death to personnel. Extreme caution is required when performing maintenance/repair. Be constantly aware that the UPS system operates with hazardous voltages. Proprietary and Confidential ©2024 Vertiv Group Corp. 1 Important Safety Instructions...

  • Page 9: Recycling The Used Battery

    CAUTION: Risk of explosion. May cause injury or death if the battery is replaced by an incorrect type. Dispose of the used batteries according to the instructions. Refer to the local codes for battery disposal. 1 Important Safety Instructions Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 10: Connection Warnings

    Default output dry contact port assigned to Back feed is number five. Output dry contacts are configurable, for more information refer to Dry contact output in section Product introduction on page 101 . Proprietary and Confidential ©2024 Vertiv Group Corp. 1 Important Safety Instructions...
  • Page 11 UPS. The text of the label has the following meaning: Risk of voltage back feed! Isolate the UPS, then check for hazardous voltage between all terminals including the protective earth before working on this circuit. 1 Important Safety Instructions Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 12 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA This page intentionally left blank Proprietary and Confidential ©2024 Vertiv Group Corp. 1 Important Safety Instructions...

  • Page 13: Installation

    9. Entry to unauthorized personnel in the installation area should be restricted. The UPS key should be given to authorized personnel only. 2.3 Unpacking Use a forklift to move the product to the installation area. Ensure that the forklift has adequate load carrying capacity. 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 14 2. To remove the carton and foams, see Figure 2.2 below . Figure 2.1 Forklift to Move the Product Figure 2.2 Remove Carton and Foams 3. Place a ramp in front of the cabinet. Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...
  • Page 15 4. Remove the 2 fixing cabinet plates and loosen the leveling feet by rotating them counterclockwise. Then remove the cabinet from the pallet. 5. To secure the cabinet in position, simply rotate leveling feet clockwise and secure the cabinet plates. 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 16 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 2.4 Move the Cabinet from the Pallet Item Description Quantity Screw Fixing cabinet plate Screw nut Screw Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...

  • Page 17: Moving The Cabinet

    4 leveling feet counterclockwise to lift them off the ground. This protects the leveling feet from damage when moving the UPS. 6. Screw the attaching cabinet plate to secure the cabinet firmly to the ground. See Figure 2.5 above . 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 18: Types Of Ups Cabinets

    2.5 Types of UPS Cabinets The battery module compartments are not present in the cabinets. The battery must be connected externally. While installing, the external battery space and wiring gauge must be considered. Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...
  • Page 19 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Table 2.1 Types of UPS Cabinets Dimension Number of Model Graphic D x W x H (mm) Switches Power Vertiv™ Liebert® MTP 1000x320x800 60kVA 60kVA Vertiv™ Liebert® MTP 1000x430x1200 100/120kVA 100/120kVA 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 20: Exterior

    Inside the cabinet, there are breakers, STS and power module slots. For 120K, wiring terminal blocks are located in the front of cabinet. For 60K and 200K, wiring terminal block are located in the back of cabinet. Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...

  • Page 21: Mechanical Data

    Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 2.7 Vertiv™ Liebert® MTP 60kVA, 120kVA, and 200kVA Liebert® MTP 60kVA Liebert® MTP 100/120kVA Liebert® MTP 160/200kVA Item Description Control panel Leveling feet Fixing cabinet plate Door lock 2.6.1 Mechanical data Table 2.2 Mechanical Data...
  • Page 22 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 2.8 Dimensions of Vertiv™ Liebert® MTP 60kVA Figure 2.9 Dimensions of Vertiv™ Liebert® MTP 100/120kVA Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...
  • Page 23 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 2.10 Dimensions of Vertiv™ Liebert® MTP 160/200kVA 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 24: Front View

    Figure 2.11 Front View Liebert® MTP 60kVA Liebert® MTP 100/120kVA Liebert® MTP 160/200kVA Item Description Power module Switch unit Switch unit Power module Power module Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...

  • Page 25: Rear View

    The rear panel of UPS is accessible when the rear door is unlocked and opened. The rear door can only be opened for 160K/200K. (Vertiv™ Liebert® MTP 60kVA Rectifier input breaker, bypass input breaker, maintenance bypass input breaker and output breaker are in the rear door.) Open the rear panel and you will see the live bars of UPS.

  • Page 26: Internal Mechanisms

    The 4 circuit breakers, Rectifier input breaker, bypass input breaker, maintenance bypass breaker, and output breaker are accessible when the front door is opened. Figure 2.13 Vertiv™ Liebert® MTP 60kVA Switch (Rear View) Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 27 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 2.14 Vertiv™ Liebert® MTP 100/120kVA Switch (Front View) Item Description AC input Bypass AC output 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 28: Wiring Terminal Blocks

    Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 2.15 Vertiv™ Liebert® MTP 160/200kVA Switch (Front View) Item Description AC input Bypass AC output 2.7.2 Wiring terminal blocks See Figure 2.18 on page 25 for UPS cabinet wiring. Table 2.3 Wiring Terminal Blocks Sr. No.
  • Page 29 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 2.16 Terminal Block Vertiv™ Liebert® MTP 60kVA Item Description Main input block Bypass input block Output block Battery input block For UPS grounding 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 30 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 2.17 Terminal Block Vertiv™ Liebert® MTP 100/120kVA Item Description Main input block Bypass input block Output block For UPS grounding Battery input block Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...
  • Page 31 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 2.18 Terminal Block Vertiv™ Liebert® MTP 160/200kVA Item Description Output block Bypass input block Main input block For UPS grounding Battery input block 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 32: Control Panel

    For detailed information, see Control Panel and Display Description on page 55 . Figure 2.19 Control Panel Item Description LCD display LED indicators Control key Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...

  • Page 33: Led Indicators

    The design of power module allows for quick and easy maintenance and replacement. The modular and hot swappable design of power module makes it a highly cost effective solution to meet the power requirements. These UPSs have a modular design but they are Monolithic and not hot swappable. 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 34: Communication Interfaces

    Liebert® MTP 100/120kVA Liebert® MTP 160/200kVA Item Description Power module Switch unit Switch unit Power module Power module 2.9.1 Communication interfaces Refer to Interface and Communication on page 99 for detailed information. Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...

  • Page 35: Power Module

    These fans provide forced convection cooling for the power module. Cooling air enters the module through the ventilation grills and is exhausted through grills located at the rear of the module. NOTE: Do not obstruct the ventilation holes. 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 36 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Table 2.5 DIP Switch Setting and Module Address Module Address DIP Switch Module Address DIP Switch Cabinet A Cabinet C Cabinet B Cabinet D Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...

  • Page 37: Power Cable

    Ensure that the AC input and battery power is completely cut OFF, before connecting any wire. • Ensure that the breakers, main breaker, bypass breaker, maintenance breaker, output breaker, and battery breaker are all in the OFF position. 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 38: Installation Drawing

    For single input application, connect Input1 to the AC power source and use 3 short wires to connect Input1 and Input2. For dual input application, connect Input1 to the main AC power source and connect Input2 to the bypass power source. Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...
  • Page 39 NOTE: For a 60K UPS, install the core in the accessory on the input1 wires as shown in the Figure 2.23 below Figure 2.23 Install the Core on the Input1 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 40: External Battery Cabinet Connection

    Once the battery is completely installed, make sure that the nominal battery voltage, battery capacity, and maximum charging current are all set in the LCD settings. If the battery setting is different from actual installation, the UPS will continue warning. Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...

  • Page 41: Backfeed Protection

    An external disconnect device, coil is controlled by the UPS interface. when input AC Loss, it will open the contact controlled by the UPS . Refer to Product introduction on page 101 . 2 Installation Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 42 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA This page intentionally left blank Proprietary and Confidential ©2024 Vertiv Group Corp. 2 Installation...

  • Page 43: Operation Mode And Ups Operation

    Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA 3 Operation Mode and UPS Operation 3.1 Block Diagram of UPS Figure 3.1 Wiring Diagram for Dual Inputs 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...

  • Page 44: Operation Mode

    This UPS is a 3-phase, 4 wire on-line, double conversion UPS that permits operation in the following modes: • Standby Mode • Line Mode • Battery Mode • Bypass Mode • ECO Mode • Shutdown Mode • Maintenance Bypass Mode (Manual Bypass) 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...

  • Page 45: Standby Mode

    In line mode, the rectifier obtains power from the utility and supplies DC power to the inverter while the charger charges the battery. The inverter filters the DC power before converting it to clean and stable AC power to the load. Figure 3.4 Line Mode Diagram 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...

  • Page 46: Battery Mode

    In battery mode, the rectifier obtains power from the battery and supplies DC power to the inverter. The inverter then filters the DC power before converting it to clean and stable AC power to the load. Figure 3.5 Battery Mode Diagram 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...

  • Page 47: Bypass Mode

    When the abnormal situation is resolved, the UPS will return to line mode if the transference was caused by a recoverable reason. Figure 3.6 Bypass Mode Diagram 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...

  • Page 48: Eco Mode

    Alternatively, the UPS will enter into shutdown mode once the battery has been discharged to the cut off level. The UPS will turn OFF the control power when it enters this mode. The rectifier, charger, and inverter are all in the OFF state. Figure 3.8 Shutdown Mode Diagram 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...

  • Page 49: Maintenance Bypass Mode

    2. Turn the battery breaker ON. 3. To start the UPS, turn ON the external power switch in distribution panel. 4. Turn the Input and the Bypass breakers ON. 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...
  • Page 50 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 3.10 System ON Standby Mode Alternatively, the UPS will enter into bypass mode, if the Bypass Mode setting is enabled. 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...
  • Page 51 When the UPS is turned ON, it will perform a self-test and start up the inverter. UPS will be switched to Line Mode when all power modules are ready. 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...

  • Page 52: Cold Start Startup

    Figure 3.14 Battery Start Item Description Battery start button 3. UPS will enter Standby Mode after pressing the Battery Start button. Refer to the diagram below for LCD display. 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...
  • Page 53 Figure 3.16 below . Figure 3.16 Entering into Battery Mode 5. As shown in the Figure 3.16 above , the UPS will then enter into Battery Mode. 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...

  • Page 54: Maintenance Bypass Operation

    Transfer from Line Mode to Maintenance Bypass Mode Remove the mechanical lock plate of maintenance bypass breaker. 60kVA 120kVA~200kVA 2. Ensure that the UPS is operating in Bypass Mode. 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...
  • Page 55 Transfer from Maintenance bypass mode to Line Mode Make sure that the maintenance is complete. The power modules are correctly installed . 2. Turn the AC input breaker and the Bypass inbut breaker ON. 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...
  • Page 56 Exit the SETUP menu and check if the UPS operates in Bypass Mode. 60kVA 120kVA~200kVA 4. Turn the Maintenance Bypass Breaker OFF. 60kVA 120kVA 200kVA 5. Lock the mechanical lock plate. 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...

  • Page 57: Turn Off Operation

    The LCD diagrams are shown figure below: Bypass Mode setting is disabled Bypass Mode setting is enabled Turn the Input breaker OFF. The LCD diagrams are shown below. Bypass Mode setting is disabled 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...
  • Page 58 Press and hold the Power button for 2 seconds to turn OFF the Inverter. Alternatively, use the LCD operation (Control èTurn OFF) to turn OFF the UPS. 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...
  • Page 59 Turn OFF operation in battery mode The LCD screen is shown in Figure 3.19 below when the UPS operates in the Battery Mode. Figure 3.19 Operating in Battery Mode 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...
  • Page 60 (Control èTurn OFF) to turn OFF the inverter. 2. The UPS will switch to Standby Mode once it is turned OFF. Follow the procedure for Turn OFF Operation in Bypass Mode/ Standby Mode. 3 Operation Mode and UPS Proprietary and Confidential ©2024 Vertiv Group Corp. Operation...

  • Page 61: Control Panel And Display Description

    3. Control Key: Refer Table 4.2 on the next page 4. Audio Alarm: Refer Table 4.3 on the next page . Figure 4.1 Control Panel Item Description LCD display LED indicators Power 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 62 Buzzer sounds every half second. UPS alarm Buzzer sounds every 1 second. UPS fault Buzzer continuously sounds. NOTE: Panel and Display are powered by bypass or battery. 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 63: Screens

    4.2.2 Main screen The Main screen will be displayed after initialization as shown in Figure 4.3 on the next page . The Main screen is split into 6 sections. 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 64 Date and time. Table 4.4 Module Status Module Icon Explanation STS icon with ID number Power module icon with ID number No power module Power module output ON 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 65 Module Icon Explanation Power module output OFF Power module charger ON Power module charger OFF Power module fault Power module is operated normally Figure 4.4 Main Menu 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 66: Control Screen

    Figure 4.6 on the facing page . 3. Touch Yes to confirm the command or touch No to cancel the command as shown in Figure 4.6 on the facing page . 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 67: Measurement Screen

    4. Refer Figure 4.7 on the next page for System Measurement Screens and Figure 4.12 on page 65 for Module Measurement Screens. All detailed measurement items are listed in Table 4.5 on page 68 . 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 68 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA 5. To monitor the system measurement value, touch System. Figure 4.7 System Measurement Screen-Input 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 69 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 4.8 System Measurement Screen-Output Figure 4.9 System Measurement Screen-Bypass 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 70 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 4.10 System Measurement Screen-Load Figure 4.11 System Measurement Screen-Battery 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 71 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA 6. To monitor the module measurement value, touch the icon. Figure 4.12 Module Measurement Screen-Input 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 72 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 4.13 Module Measurement Screen-Output Figure 4.14 Module Measurement Screen-Bypass 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 73 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 4.15 Module Measurement Screen-Load Figure 4.16 Module Measurement Screen-Battery 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 74: Setup Screen

    3. To access the Setup submenu, enter the 4 digit password and click the Enter button. The LCD screen would prompt for a retry if the password entered is incorrect as shown in below Figure 4.18 on page 70 . 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 75 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 4.17 Enter Password Screen 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 76 NOTE: The maintainer password is owned by service personnel. Entering different levels of password allow access to different settings. The setting can be changed in different operation mode. 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 77 Mode Mode Mode Maintaine Setting Item User Model Name Language TIME Change Password Baud Rate Audible Alarm Gener Factory Reset Function EEPROM Reset Save Setting Startup Screen 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 78 Bypass Frequency Range Converter Mode ECO Mode Bypass Mode Auto-Restart Syste Power Walk Battery Mode Delay Time System Shutdown Time System Restore Time Redundancy Power Rating Setting 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 79 Setting Periodic Battery Test Battery Test Interval Battery Stop by Time Stop by Battery Voltage Stop by Battery Capacity Battery Age Alert Temperatur Compensati Charging Voltage 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 80 3. Select Enter to confirm the setting change or select ESC icon to cancel the setting. See Figure 4.20 on the facing page . 4. Save the setting in General screen, after finishing the setting. Figure 4.19 Setup Screen 1 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 81 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 4.20 Setup Screen 2 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 82: General Setup Screen

    • Portuguese • German • Turkish • Rusian • Polish Set current date and time. Time Adjust Time yyyy/mm/dd hour:min:sec. NOTE: Must be set after UPS installation. 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 83 EEPROM Reset Refer to Table 4.8 on the next page Set New Password: Password 0000 (Default) Save EEPROM. Save Setting NOTE: Use this feature to save the settings. 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 84 Bypass Frequency Range Converter Mode ECO Mode Bypass Mode Auto-Restart System Battery Mode Delay Time System Shutdown Time System Restore Time Redundancy Power Rating Setting Charger Test Calibration Data 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 85 UPS is not set up under specific mode, the Warning screen shown in Figure 4.23 on the next page will appear if it is not set up in specific mode. 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 86 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 4.22 Setup System Screen Figure 4.23 Warning Screen 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 87 Enable (Default) Once Enable is set, the UPS will return to line mode if the UPS is shut down due to low battery and the utility is restored. 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 88 UPS is operated in standby mode. If the UPS is not in Standby Mode, the Warning Screen will appear as shown in Figure 4.23 on page 80 . 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 89 Set battery low voltage (10.5 to 11.5V)x(battery number) Low Voltage Battery Low/ • 11.4V x Battery number (Default) Shutdown Setting Low Capacity Set battery low capacity (20 to 50%) 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 90 Set battery auto restart voltage Auto Restart BATT Volt • 0V (Default) Set battery charging voltage. (14.1~14.4V) • 14.1V(Default) Charging Voltage Set battery float voltage. (13.5~14.0V) • 13.7V(Default) 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 91 Refer to Figure 4.25 below to see the Pre-Alarm screen and Table 4.11 on the next page for Pre-Alarm setting list. Pre-Alarm settings can be set in any operation mode. Figure 4.25 Pre-Alarm Screen 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 92 +/- 2Hz • +/- 3Hz • +/- 4Hz (Default) Set UPS Overload percentage (40~100%) • 100% (Default) Load Set UPS load unbalance percentage (20~100%) • 100% (Default) 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 93 Setting Sub Item Description Item Set Dynamic Password disable or enable Dynamic • Disable (Default) Password • Enable Customer ID • The default customer code is 0000000 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 94: Information Screen

    Figure 4.28 on the facing page and Figure 4.29 on the facing page . To navigate between the different pages, use the Up and Down arrows. 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 95 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 4.28 System Screen 1 Figure 4.29 System Screen 2 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 96 The battery parameters such as the battery nominal voltage, capacity, charging current, and so on. information will be displayed when the battery submenu is selected, as shown in Figure 4.30 below . Figure 4.30 Battery Screen 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 97: Events Screen

    When an event occurs, the main screen will display a flashing icon. To check the latest event lists, history events, and to reset all events, select icon, Refer to Figure 4.32 on the next page . Figure 4.31 Alarm Warning Screen 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 98: Current Events

    Only 10 events are listed per page. If there are more than 10 events, you can use the Up and Down arrow to page through the events. See Figure 4.32 below . Figure 4.32 Current Events Screen 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 99: History Events

    Then, touch Yes to reset all events or touch No to cancel this action. See Figure 4.35 on the next page . 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 100 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 4.34 Reset All Events Screen Figure 4.35 Reset All Events Confirmation Screen 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 101: Alarm List

    Inverter over current Fault! <61>BYP SCR SC Bypass SCR short circuited Fault! <62>BYP SCR open Bypass SCR open circuited Fault! <6C> Bus-VOL dec fast BUS voltage drop too fast 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 102 Utility extremely unbalanced Warning! <3D> Bypass unstable As stated. Warning! <3E> BATT VOL High Battery voltage is too High Warning! <3F> BATT VOL Unbalance Battery voltage unbalanced 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 103: History Record

    Setup! Charger Test Setup! Power Rating Setting Setup! Battery Capacity in Ah Setup! Nominal Battery Voltage Setup! Battery Low Voltage Setup! Maximum Charging Current Setup! Battery Shutdown Voltage 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...
  • Page 104 Control! System Turn Off Control! Manual Battery Test Control! Cancel Battery Test Control! Turn To Bypass Control! Shutdown Restore Control! Cancel Shutdown Control! Charger Turn On Control! Charger Turn Off 4 Control Panel and Display Proprietary and Confidential ©2024 Vertiv Group Corp. Description...

  • Page 105: Interface And Communication

    RS232 port USB port Dry contact ports Liebert® MTP 60kVA Liebert® MTP 100/120kVA Liebert® MTP 160/200kVA Dry Contact No. Function Remote EPO input port Battery Cabinet Temperature Detection Port) 5 Interface and Communication Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 106: Dry Contact Port

    UPS and battery temperature detection board. X6 is the battery cabinet temperature detection port. The port is shown in Figure 5.3 below and described in Table 5.2 on the facing page . Figure 5.3 Battery Cabinet Temperature Detection Port Proprietary and Confidential ©2024 Vertiv Group Corp. 5 Interface and Communication...

  • Page 107: Local Communication Ports Rs232 And Usb

    Extra communication card is a device with additional interface functionality. This device can provide a variety different applications for UPS. The communication interfaces of extra communication card are listed below: • RS232 Port • Dry Contact Output • Dry Contact Input 5 Interface and Communication Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 108 The UPS is working normally. Load on bypass The UPS is in Bypass mode. Load on Battery The UPS is in Battery mode. Low battery The battery voltage is low. Proprietary and Confidential ©2024 Vertiv Group Corp. 5 Interface and Communication...
  • Page 109 The bypass “static transfer switch” is abnormal.(backfeed protection) SummaryAlarm bypass mode/battery mode/bat open/bypass loss/fault/warning/line fail NOTE: If you want to change the setting, please contact Vertiv service personnel. Dry contact input There are two Input Contacts on MTP 60-120-200kVA (rated at 50mA max).
  • Page 110 Battery Circuit Breaker open "Warning! <4A> Ext. maint. bps clsd" External Maintenance Bypass closed In order to activate these functions it is required to connect the two pins of the Input port. Proprietary and Confidential ©2024 Vertiv Group Corp. 5 Interface and Communication...

  • Page 111: Troubleshooting

    Check if the ambient temperature is over the Fault! Over specified value. Make sure adequate space is allowed for air vents and the fan is working. Temperature Alternatively, contact service personnel. 6 Troubleshooting Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 112 Warning! Redundancy Check the redundancy setting is correct and As stated. Set Fail contact service personnel. Warning! Maintenance Check if the connector is loose when it acts Enter maintenance. Bypass abnormally. Proprietary and Confidential ©2024 Vertiv Group Corp. 6 Troubleshooting...

  • Page 113: Service

    Loosen the 4 screws that secure the air filter. 2. Use a brush to remove dust from the air filter or replace it with a new spare part. 3. Tighten the 4 screws to install the air filter. 7 Service Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 114: Serviceability Of Internal Parts

    7.4 Transfer the UPS to Maintain Bypass Mode 7.4.1 Vertiv™ Liebert® MTP 60kVA mode transfer to Maintain Bypass mode If the UPS work in online mode, turn off the UPS to bypass mode. 2. Remove the cover of the Maintain bypass as shown in the Figure 7.2 on the facing page , then the UPS will force transfer to bypass mode and the warning <3A>...
  • Page 115 5. Remove the metal part to divide the neutral bar as shown in the Figure 7.3 below . Figure 7.3 Removing the Metal Part 6. Disconnect the input/output EMI board by unpluging the quick connect terminal as shown in the Figure 7.4 on the next page . 7 Service Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 116: Vertiv™ Liebert® Mtp 120Kva Mode Transfer To Maintain Bypass Mode

    FORMEX Sheet metal 7.4.2 Vertiv™ Liebert® MTP 120kVA mode transfer to Maintain Bypass mode If the UPS work in online mode, turn off the UPS to bypass mode. 2. Remove the cover of the Maintain bypass as shown in the Figure 7.5 on the facing page , then the UPS will force transfer to bypass mode and the warning <3A>...
  • Page 117 Otherwise the procedure is completed. 5. Remove the metal part to divide the neutral bar as shown in the Figure 7.6 below . Figure 7.6 Removing the Metal Part 7 Service Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 118: Vertiv™ Liebert® Mtp 200Kva Mode Transfer To Maintain Bypass Mode

    Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA 7.4.3 Vertiv™ Liebert® MTP 200kVA mode transfer to Maintain Bypass mode If the UPS work in online mode, turn off the UPS to bypass mode. 2. Remove the cover of the Maintain bypass as shown in the Figure 7.7 below , then the UPS will force transfer to bypass mode and the warning <3A>...

  • Page 119: Specifications

    Noise within 1 m Max. 75 Altitude ≤1000, derate power by 1% per 100m Relative humidity % RH 0~95, non-condensing Operating temperature °C 0~ 40°C Storage and transport temperature for UPS °C -15 ~60 8 Specifications Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 120: Mechanical Characteristics

    216 (6 cells x 36 12V battery block) Number of lead-acid cells Maximum 240 (6 cells x 40 12V battery block) Minimum 192 (6 cells x 32 12V battery block) Float voltage V/cell 2.28V/cell Temperature mV/℃/cl 0~-5 Compensation Proprietary and Confidential ©2024 Vertiv Group Corp. 8 Specifications...

  • Page 121: Electrical Characteristics (Inverter Output)

    >150% for 200ms ±1 balanced load Steady state voltage stability ±2 100% unbalanced load <2 linear load Total harmonic voltage <4 non-linear load +/- 1Hz +/- 2Hz Synchronization window +/- 4Hz default: 4Hz 8 Specifications Proprietary and Confidential ©2024 Vertiv Group Corp.

  • Page 122: Electrical Characteristics (Bypass Mains Input)

    Lower limit: • -10, -20, -30 • default -20 +/- 1Hz +/- 2Hz Frequency range +/- 4Hz default: 4Hz NOTE: Factory setting is 400V. 380V or 415V is selectable by commissioning engineer. Proprietary and Confidential ©2024 Vertiv Group Corp. 8 Specifications...

  • Page 123: Ups Installation For Parallel Cabinet System

    Two cabinets must have the same length input and output wires. Otherwise, it will cause the unbalance current of output load. Refer to Installation on page 7 for the input and output wiring and battery wiring methods. 9 UPS Installation for Parallel Proprietary and Confidential ©2024 Vertiv Group Corp. Cabinet System...
  • Page 124 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA Figure 9.1 Parallel System Wiring with Four Breakers 9 UPS Installation for Parallel Proprietary and Confidential ©2024 Vertiv Group Corp. Cabinet System...

  • Page 125: Parallel Board Setting And Power Module Setting

    Table 9.2 Parallel Board Cabinet Information Cabinets Switch Setting Cabinet A SW2 ON SW3 ON Cabinet B SW2 OFF SW3 ON Cabinet C SW2 ON SW3 OFF 9 UPS Installation for Parallel Proprietary and Confidential ©2024 Vertiv Group Corp. Cabinet System...

  • Page 126: Parallel Function Setting

    3. Make sure that the ID settings of the module and the cabinet must be matched correctly, so that the normal operation of parallel connection is not affected. See Table 9.1 on the previous page . 9 UPS Installation for Parallel Proprietary and Confidential ©2024 Vertiv Group Corp. Cabinet System...

  • Page 127: Parallel Cable Connection

    (for higher reliability). Figure 9.3 Two Cabinets in Parallel Figure 9.4 Three Cabinets in Parallel Figure 9.5 Four Cabinets in Parallel 9 UPS Installation for Parallel Proprietary and Confidential ©2024 Vertiv Group Corp. Cabinet System...

  • Page 128: Parallel System Turn On Procedure

    NOTE: When all the settings of the parallel UPS are completed, all UPS are regarded as a system, and when one of the UPS is turned on or off, all the UPS will be synchronized. Including EPO is activated, all UPS are shut down at the same time. 9 UPS Installation for Parallel Proprietary and Confidential ©2024 Vertiv Group Corp. Cabinet System...

  • Page 129: Appendices

    505 N Cleveland Ave Westerville, OH 43082 Europe Via Leonardo Da Vinci 8 Zona Industriale Tognana 35028 Piove Di Sacco (PD) Italy Asia 7/F, Dah Sing Financial Centre 3108 Gloucester Road, Wanchai Hong Kong Appendices Proprietary and Confidential ©2024 Vertiv Group Corp.
  • Page 130 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA This page intentionally left blank Proprietary and Confidential ©2024 Vertiv Group Corp. Appendices...
  • Page 131 Vertiv™ Liebert® MTP Online UPS 60-100-120-160-200kVA...
  • Page 132 Vertiv.com | Vertiv Headquarters, 505 N Cleveland Ave, Westerville, OH 43082 USA ©2024 Vertiv Group Corp. All rights reserved. Vertiv™ and the Vertiv logo are trademarks or registered trademarks of Vertiv Group Corp. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness here, Vertiv Group Corp.

Table of Contents

Save PDF