Tv Format Setup (European And Asian Models); Fm/Am Frequency Step Setup - Onkyo NR3007 - TX AV Network Receiver Instruction Manual

First Time Setup—Continued
TV Format Setup (European and
Asian models)
For the onscreen setup menus to display properly, you
must specify the TV system used in your area.
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select "6. Miscella-
neous", and then press [ENTER].
The "Miscellaneous" menu appears.
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3
Use the Up and Down [ ]/[ ] but-
tons to select "2. OSD Setup",
and then press [ENTER].
The "OSD Setup" menu appears.
6–2. OSD Setup
Immediate Display
Display Position
TV Format
Language
4
Use the Up and Down [ ]/[ ] but-
tons to select "TV Format", and
then use the Left and Right
[ ]/[ ] buttons to select:
Auto: Select this to automatically
detect the TV system from the
video input signals.
NTSC: Select if the TV system in
your area is NTSC.
PAL: Select if the TV system in
your area is PAL.
5
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.

FM/AM Frequency Step Setup

For FM/AM tuning to work properly, you must specify
the FM/AM frequency step used in your area. Note that
when this setting is changed, all radio presets are
deleted.
1
2
On
Bottom
Auto
English
When you've finished, press the
[SETUP] button.
The setup menu closes.
Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
Use the Up and Down [ ]/[ ] but-
tons to select "7. Hardware
Setup", and then press [ENTER].
The "Hardware Setup" menu appears.
7. Hardware Setup
1. Remote ID
2. Multi Zone
3. Tuner
4. HDMI
5. Network
6. Firmware Update
59