Peripheral Device Installation; Turbo/Non-Turbo Hotkeys - TYAN TITAN I Manual

3.20 Peripheral Device Installation

After all the jumpers on the mainboard have been set, the it can be mounted
into the case. Then proceede in installing the I/O controller, display con-
troller, and any other peripheral devices.
If a PCI-Bus interface card is to be installed in the system, any one of the
four PCI-Bus slots can support either a Master or a Slave device.
After installing the peripheral controller, the user should check everything
again, and prepare to power-on the system.
3.21 Turbo / Non-Turbo hotkeys
press <Ctrl> + <Alt> + <-> : turn off turbo function.
press <Ctrl> + <Alt> + <+> : turn on turbo function.
S1461/6-001-01 2 4