Boot; Security; Exit - TYAN THUNDER LE-T User Manual

(Reserved Memory
Address continued)

3.5 Boot

Options related to boot devices can be altered through the following.
Boot Device Priority
Boot Device
Hard Disk Drive
Default: Onboard IDE
Removable Devices
3.6 Power Management Setup

3.7 Security

Options related system security can be altered through the following.
Change Supervisor
Password
Change User Password
Clear User Password
Boot Sector Virus
Protection
Default: Disabled

3.8 Exit

Options related to exiting and saving the BIOS can be altered through the following.
Exit Saving Changes
Exist Discarding Changes
Load Optimal Defaults
Load Failsafe Defaults
Discard Changes
CC000
D0000
D4000
D8000
DC000
Disabled
1st Boot Device
2nd Boot Device
3rd Boot Device
Removable Dev.
Hard Drive
ATAPI CDROM
Onboard IDE
FastTrak ATA-100/RAID
All ACPI/APM options disabled.
Enabled
Disabled
OK
Cancel
OK
Cancel
OK
Cancel
OK
Cancel
OK
Cancel
http://www.tyan.com
Settings for boot priority.
Changes the order of boot
device.
Specifies the boot
sequence for hard drive
booting. This option will
show all storage devices.
Options dependant on
System but most of the
time it wi l l be the FDD..
Changes system
password.
Changes boot password.
Clears boot password.
Toggles protection of boot
sector on the hard drive
from being modified.
Exit BIOS Setup and save
changes.
Exit BIOS Setup and
ignore changes.
Loads all BIOS defaults for
optimal performance.
Loads all BIOS defaults for
stable performance.
Reset all changes to
previous state.
40