Fsb Speed Jumper - TYAN THUNDER LE-T User Manual

2.4 FSB Speed Jumper (JP5)
With this jumper, the Front Side Bus (FSB) can be set to either 100 or 133MHz.
Pay careful attention to the speed of the CPU(s) that you will be installing,
and use that information to set JP5 accordingly. Setting the FSB to a
speed higher than your CPU can handle will damage the CPU.
NOTE
Tyan takes no responsibility and will not be held liable for damage related
to the operation of the CPU(s) using different settings from those of the
CPU manufacturer's specified default settings.
11
http://www.tyan.com
JP5
OPEN
133 or 100MHz
default is OPEN
speed is CPU-dependent
CLOSED
100MHz ONLY