Fan Connectors (Fan 1 To 6) - TYAN THUNDER LE-T User Manual

2.6 FAN Connectors* (FAN1, FAN2, FAN3, FAN4, FAN5, FAN6)
These FAN connectors can be used to install cooling devices. FAN1 and FAN2 are for CPU1 and
CPU2, respectively.
The FAN connectors, with the exception of FAN5 and FAN6 are 12V at
NOTE 1.2A and only support cooling fans below or up to that rating. Tyan
takes no responsibility and will not be held liable for damage related to the
misuse of these fan headers.
m
Also refer to Page 15 for which connector belongs to which CPU.
FAN #
CPU FAN 1
CPU FAN 2
Chassis FAN 3
Chassis FAN 4
Chassis FAN 5
Chassis FAN 6
* For hardware monitoring information related to FAN1, FAN2, and FAN3, please check the
Hardware Monitoring section.
J76
Source
MOS
MOS
J76
MOS
12V
12V
http://www.tyan.com
FAN Pinout
FAN4
FAN5
FAN6
FAN2
FAN1
FAN Specifications
Voltage
Amperage
FAN3
Specifications
1.2A Max
1.2A Max
12V J76: Open
1.2A J76: Closed
1.2A Max
Directly receives 12V
Can support >1.2A
Directly receives 12V
Can support >1.2A
13
1 2 3
12V
1.2A