Installing Optional So-Dimm Modules - TYAN THUNDER K8HR Manual

2.13 - Installing Optional SO-DIMM modules

Your Thunder K8HR S3891 motherboard is equipped with an optional
proprietary SO-DIMM connector. The SO-DIMM connector can be used for
expansion cards to provide such features as, additional SATA or SCSI support.
For details of available expansions cards, visit the TYAN website at
http://www.tyan.com. To install a SO-DIMM expansion card:
1. Open the spring levers as shown.
2. Insert
shown, making sure that the card
is the right way up. The card will fit
in only one way and the screw
holes in the card should line up
exactly with the mounting posts on
the motherboard.
3. Push the SO-DIMM card down into
place and make sure the spring
levers click into place as shown.
4. Screw the board into place using
one or two screws as required.
the SO-DIMM card
33
http://www.TYAN.com
as