TYAN THUNDER K8HR Manual page 47

3.5.4 – Super IO Configuration Sub-Menu
You can use this screen to select options for the Super I/O settings. Use the
up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-)
keys to change the value of the selected option
Main Advanced
Configure Nat417 Super IO Chipset
Onboard Floppy Controller
Serial Port1 Address
Serial Port2 Address
Parallel Port Address
Feature
Configure Nat417 Super IO Chipset
Onboard Floppy Controller
Serial Port1 Address
Serial Port2 Address
BIOS Setup Utility
PCI/PnP Boot
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[Disabled]
Option
Enabled Allows BIOS to enable or disable the
floppy controller.
Disabled
3F8/IRQ4
3E8/IRQ4
Allows BIOS to select Serial Port1
Base Addresses.
2E8/IRQ3
Disabled
2F8/IRQ3
3E8/IRQ4 Allows BIOS to select Serial Part2
Base Addresses.
2E8/IRQ3
Disabled
47
http://www.TYAN.com
Security Chipset
Allows BIOS to enable
or disable Floppy
Controller.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
Exit