Installing Optional So-Dimm Modules - TYAN TOLEDO I3000R Manual

2.9 - Installing Optional SO-DIMM modules

Your Toledo i3000R S5191 motherboard is equipped with an optional proprietary
SO-DIMM connector. The SO-DIMM connector can be used for expansion cards to
provide such features as, additional SAS/SATA II or SCSI support. For details of
available expansions cards, visit the TYAN website at http://www.tyan.com. To
install a SO-DIMM expansion card:
1. Open the spring levers as shown.
2. Insert the SO-DIMM card as shown, making
sure that the card is the right way up. The
card will fit in only one way and the screw
holes in the card should line up exactly with
the mounting posts on the motherboard.
3. Push the SO-DIMM card down into place and
make sure the spring levers click into place
as shown.
4. Screw the board into place using one or two
screws as required.
Removal of a SO-DIMM card is a reversal of the installation procedure. Push out
the spring levers as shown and pull the card out of the socket.
The SO-DIMM expansion cards will fit in the slot only one way. Make sure that you
align the slot in the card with the key in the card slot.
29
http://www.tyan.com